*6.0kW cooling, 7.0kW heating
*Panasonic Inverter technology
*Extremely high airflow
*High ceiling compatible
*Low profile design
Panasonic Inverter technology delivers substantial energy savings, to benefit the environment and your power bill. The Inverter allows up to 50% energy savings during cooling operation and 64% energy savings during heating. This revolutionary technology provides a more even room temperature, as it does not need to be constantly turned on and off. This means that the desired room temperature you set on the remote control will be maintained at all times, providing constant comfort all year round.
Panasonic ducted systems have been designed with flexibility in mind. This is extremely helpful when designing a system for your home, and also makes installation much easier. A maximum piping length of up to 75m allows the system to be used in all buildings, no matter the size or shape. Both the indoor and outdoor unit are compact and lightweight, making them easy to transport, and easy to install.
The intelligent Inverter feature provides the exact amount of power required to rapidly cool or heat your room, from the moment it is switched on. This enables your room to heat 4 times faster or cool 1.5 times faster than a non-Inverter model.
A built-in high-lift drain pump provides lift up to 850mm from the ceiling surface, allowing the unit to be installed in almost all ceiling locations. The built- in drain pump also allows longer horizontal drain piping to be used.
Now featuring an outstanding operating temperature range, cooling operation is possible even when it is a scorching 46C outside, which is perfect for Australia’s hot summer days. The heating operation is designed to operate even when it’s a freezing -20C outside, so even the coldest parts of Australia are covered.
Convenience is assured with a weekly On/Off timer (6 settings per day and 42 per week) wired remote control. Installation is also simple, thanks to the thin, lightweight design and long pipe distances, making large differences in elevation possible between the indoor and outdoor units.The airflow flaps can also be easily removed for cleaning.
Find your local Specialist Air Network dealer
Inverter – 50% energy saving
Inverter: 50% (Comparison of CS/CU-E12MKR inverter and CS/CU-W12EKR non- inverter air conditioners when operating for 8 hours a day, for one year. Test conditions <room size> 16.2m2; outside temp: DB35°C / WB24°C, Set temp: 25°C; fan speed – Hi; Airflow direction – Auto swing. Operation starts from indoor temperature DB35°C / WB24°C, until it achieves the set temperature 25°C, total operation for 8 hours.)
Inverter – Cool 1.5 times faster
3.5kW Inverter vs. non-Inverter. Outside room temperature: 35°C; setting temperature: 25°C
Inverter – Heat 4 times faster
Comparison of 2.6kW.. Inverter and Non-Inverter.
Outside room temperature: 2°C ; Setting temperature: 25°C