EY78A1X57 DRILL ONLY
High speed drilling performance with a dual function rotary hammer or drill and driver. Featuring a complete concrete plug installation by one tool, possible to use with dual voltage, SDS-plus bit system and a 5-stage clutch plus drill. *Battery pack and battery charger are not included.
The Panasonic EY78A1X57 14.4V/18V Rotary Hammer Drill & Driver is powerful, light and offers high speed drilling if equipped with a 14.4V or 18V battery. It is easy and comfortable to hold and features an excellent cooling and dust proof design for continuous use as well as an SDS-plus bit system. It offers five torque levels, which can be adjusted according to the hardness of the material or the type of material being fastened, an LED light for greater visibility and a shoulder strap.
The Rotary Hammer Drill & Driver offers a high speed concrete drilling using an air type, Cup Piston Method hammer.
The torque level can be adjusted according to the hardness of the material or the type of material being drilled, approximately from 1.5 to 5.4N.m (1.0N.m per stage, total 5 stage).
Many things can happen at a job site such as unexpected incidents, water contact, or exposure to dust; which can cause a tool to malfunction. By incorporating the Tough Tool IP technology, it reassures that Panasonic cordless tools perform at its best in the most difficult situations.
The International Protection Code classifies the degree of protection provided against intrusion of solid foreign objects and liquids in electrical machinery and fixtures as defined by the IEC standards.
LEVEL 5 - Dust Protected
LEVEL 6 - Protected Against Powerful Water Jets
An additional rubber cap seals the switch and protects it against dust and water.
The electronic circuits of control panel and battery pack are covered by an Urethan layer for maximum dust and water protection.
The battery cells are designed to avoid intrusion of moisture.
Dual voltage technology offers powerful performance with either a 14.4V or 18V battery. A special dual voltage circuit detects the voltage of the attached battery pack and controls the current and voltage flows to the tool to ensure optimum performance.
With 18.0 voltage, it’s easy to use the Rotary Hammer Drill & Driver packed with high speed drilling.
Panasonic’s new generation 18V 4.2Ah Li-ion battery cell delivers high power and long lasting battery capacity. The 18V Li-ion batteries are durable and has great working capacity per charge.
Over-discharge prevention sensor
Prevents over-discharge to avoid lasting cell damage or recharge problems.
Battery overheat protection sensor
Cuts off power to the motor before the battery temperature rises.
Individual monitoring of battery cell voltage
Each cell monitored by sensor to ensure optimal discharge control.
Battery capacity indicator
To reduce the risk of battery power running low, users can check status on the indicator.
Flashing lamps indicates overheating battery. Battery is automatically reactivated when temperature drops.
Heat resistance layer technology
In cases where seperator is damaged and abnormal heat is created, HRL acts to contain this heat, just like a Fire wall.
Panasonic’s own developed Nickel oxide material provides higher capacity and higher reliability.