PT-DZ16KU

Panasonic's unique quad-lamp system, with its high-power lamps, has helped to make the body compact while providing an astounding 16,000 lm of brightness.
  • Up to 3,000-hour* lamp replacement cycle and 12,000-hour** "Eco Filter" replacement cycle reduce the total cost of ownership (TCO).
  • The Geometric Adjustment function for specially shaped screens.
* The usage environment affects the lamp replacement cycle. ** The usage environment affects the duration of the filter.
How to Buy

Overview


The Panasonic PT-DZ16K is a 1080p-compatible, high-performance, Full-HD projector with excellent durability and low TCO (Total Cost of Ownership). It is ideal for a wide range of applications requiring high brightness and long-term operation, such as museums, entertainment facilities, churches, and large auditoriums.

Specs

Power Supply: 200-240 V AC, 50/60 Hz (Max current requirements: 12 A @200 V)
Power Consumption: 2,150 W (0.3 W with STANDBY MODE set to ECO,*1 9 W with STANDBY MODE set to NORMAL.)
Dissipation BTU: Max. 7,338 BTU/hour (without light output: 7,127 BTU/hour)
DLP™ chip:  
Panel size: 24.1 mm (0.95 in) diagonal (16:9 aspect ratio)
Display method: DLP™ chip x 3, DLP™ projection system
Pixels: 2,073,600 (1,920 x 1,080) x 3, total of 6,220,800 pixels
Lens: Optional powered zoom/focus lenses
Lamp: 420 W UHM lamp x 4, replacement cycle of up to 3,000 hours*2
Screen size (diagonal): 1.78-25.4 m (70-1,000 in), 1.78-15.24 m (70-600 in) with the ET-D75LE8, 16:9 aspect ratio
Brightness : 16,000 lm (four-lamp) *3
Center-to-corner uniformity: 90% *3
Contrast : 10,000:1 (full on/off, with dynamic iris set to "3") *3
Resolution: 1,920 x 1,080 pixels (Input signals that exceed this resolution will be converted to 1,920 x 1,080 pixels.)
Scanning frequency SDI:  
3G-SDI:
SMPTE ST 424 compliant,
[YPBPR 4:2:2 10-bit] 1080/50p, 1080/60p,
[RGB 4:4:4 12-bit /10-bit] 1080/50i, 1080/60i, 1080/25p,1080/24p, 1080/24sF, 1080/30p
HD-SDI:
SMPTE ST 292 compliant, [YPBPR 4:2:2 10-bit]
720/50p, 720/60p, 1035/60i, 1080/50i, 1080/60i, 1080/25p, 1080/24p, 1080/24sF, 1080/30p
SD-SDI:
SMPTE ST 259 compliant, [YCBCR 4:2:2 10-bit] 480i, 576i
Scanning frequency HDMI/DVI-D:: 480i*4, 480p, 576i*4, 576p, 720/60p, 720/50p, 1080/60i, 1080/50i, 1080/24p, 1080/24sF, 1080/25p,
1080/30p, 1080/60p, 1080/50p, VGA (640 x 480)-WUXGA*5 (1,920 x 1,200), compatible with non-interlaced signals only, dot clock: 25-162 MHz
RGB:
fH: 15-100 kHz, fV: 24-120 Hz, dot clock: 162 MHz or less
YPBPR(YCBCR):
fH: 15.73 kHz, fV: 59.94 Hz [480i (525i)]
fH: 15.63 kHz, fV: 50 Hz [576i (625i)]
fH: 45.00 kHz, fV: 60 Hz [720 (750)/60p]
fH: 33.75 kHz, fV: 60 Hz [1035/60i]
fH: 28.13 kHz, fV: 50 Hz [1080 (1125)/50i]
fH: 27.00 kHz, fV: 24 Hz [1080/24p]
fH: 33.75 kHz, fV: 30 Hz [1080/30p]
fH: 56.25 kHz, fV: 50 Hz [1080/50p]
fH: 31.47 kHz, fV: 59.94 Hz [480p (525p)]
fH: 31.25 kHz, fV: 50 Hz [576p (625p)]
fH: 37.50 kHz, fV: 50 Hz [720 (750)/50p]
fH: 33.75 kHz, fV: 60 Hz [1080 (1125)/60i]
fH: 28.13 kHz, fV: 25 Hz [1080/25p]
fH: 27.00 kHz, fV: 48 Hz [1080/24sF]
fH: 67.50 kHz, fV: 60 Hz [1080/60p]
Video/Y/C:
fH: 15.73 kHz, fV: 59.94 Hz [NTSC/NTSC4.43/PAL-M/PAL60],
fH: 15.63 kHz, fV: 50 Hz [PAL/PAL-N/SECAM]
Optical Axis Shift:  
Vertical: +/-60 % (+/-50 % with the ET-D75LE6) from center of screen (powered)
Horizontal: +/-20 % (+/-15 % with the ET-D75LE6) from center of screen (powered)
Keystone correction range*6:  
Vertical : +/-40° with the ET-D75LE10/ET-D75LE20 (+/-22° with the ET-D75LE50, +/-28° with the ET-D75LE6)
Horizontal: +/-15°
Installation: Ceiling/floor, front /rear
Terminals:  
SDI IN: BNC x 1 (3G/HD/SD-SDI)
HDMI IN: HDMI 19-pin x 1 (Deep Color, compatible with HDCP)
DVI-D IN: DVI-D 24-pin x 1 (DVI 1.0 compliant, compatible with HDCP, compatible with single link only)
RGB 1 IN: BNC x 5 (RGB/YPBPR/YCBCR/YC x 1)
RGB 2 IN: D-Sub HD 15-pin (female) x 1 (RGB/YPBPR/YCBCR x 1)
VIDEO IN: BNC x 1 (composite video)
SERIAL IN: D-sub 9-pin (female) x 1 for external control (RS-232C compliant)
SERIAL OUT: D-sub 9-pin (male) x 1 for link control
REMOTE 1 IN: M3 x 1 for wired remote control
REMOTE 1 OUT: M3 x 1 for link control
REMOTE 2 IN: D-sub 9-pin (female) x 1 for external control (parallel)
LAN: RJ-45 x 1 (for network connection, 10Base-T/100Base-TX, compliant with PJLink™)
Cabinet materials: Molded plastic
Dimensions (W X H X D): 620 x 291*7 x 800 mm (24-7/16 x 11-15/32*7 x 31-1/2 in) (optional lens not included)
Weight : Approximately 43 kg (94.8 lbs) (optional lens not included) *8
Operation noise: 48 dB (quad lamp operation) *3
Operating Environment: Operating temperature: 0-45°C (32-113°F)*9, operating humidity: 10-80 % (no condensation)
Applicable software: Logo Transfer Software, Multi Projector Monitoring & Control Software
Supplied accessories: Power cord with secure lock, wireless/wired remote control unit, batteries (R6/AA type x 2)
Footnotes: * Product numbers vary depending on the market. The general guideline is as follows: The product number in North America and Taiwan is PT-DZ16KU.
The product number in Europe (except for those shipped directly to Europe), CIS, Asia (except Taiwan), Oceania, Middle East, and Africa is PT-DZ16KE.
The product number for the direct shipments to Europe is PT-DZ16KEJ.
*1 When the STANDBY MODE is set to ECO, network functions such as power on over the LAN will not operate.
Also, only certain commands can be received for external control using the serial terminal.
*2 The usage environment affects the lamp replacement cycle.
*3 Measurement, measuring conditions, and method of notation all comply with ISO 21118 international standards.
*4 Pixel repetition signals only (dot clock: 27.0 MHz).
*5 WUXGA resolution is supported only when the signals are compliant with VESA CVT-RB (Coordinated Video Timing-Reduced Blanking).
*6 Correction range is limited during simultaneous horizontal and vertical correction.
*7 With legs at shortest position.
*8 Average value. May differ depending on the actual unit.
*9 The operating temperature range is 0 °C to 40 °C (32 °F to 104 °F) when the FAN CONTROL is set
to HIGH ALTITUDE MODE (for altitudes from 1,400 m to 2,700 m (4,593 ft to 8,858 ft) above sea level). When the projector
is used with the ET-SFR510 Smoke Cut Filter, the operating temperature range is 0 °C to 35 °C (32 °F to 95 °F), and the projector cannot be used in places at high altitude.
 

Accessories

model description

News & Reviews

"A great all-around projector that can be used for business, education and medical settings,at a lower price point than many
projectors with its capabilities."
-About.com