PT-EX600U

The new PT-EX600U LCD projector with XGA resolution (1,024 x 768), 6,000 lumens of brightness and a contrast ratio of 5,000:1, offers a versatile solution for classrooms, lecture halls, and meeting rooms. The PT-EX600U features a highly durable optical engine with inorganic LCD panels and polarizers providing up to 10,000 hours of maintenance free service. It also offers a long lasting eco filter (up to 12,000 hours) and a long lamp replacement cycle of up to 4,000 hours. The PT-EX600U has powered lens shift and zoom and a mechanical shutter as well as a wide selection of optional lenses including short-throw, long-throw zoom and fixed-throw lenses for rear projection use.
How to Buy

Overview

The new PT-EX600U LCD projector with XGA resolution (1,024 x 768), 6,000 lumens of brightness and a contrast ratio of 5,000:1 offers a versatile solution for classrooms, lecture halls, and meeting rooms. The PT-EX600U features a highly durable optical engine with inorganic LCD panels and polarizers providing up to 10,000 hours of maintenance free service. It also offers a long lasting eco filter (up to 12,000 hours) and a long lamp replacement cycle of up to 4,000 hours.

The PT-EX600U has powered lens shift and zoom and a mechanical shutter. With the lamp power set to Auto, the intelligent lamp control system automatically adjusts the lamp output in accordance with the brightness of the projected image and reduces it by up to 70%. It also combines with color shift correction, which corrects the shift in the color balance that occurs when the lamp out put drops, resulting a reduction in power consumption while excellent color reproduction is maintained.

Choose from a wide lineup of lenses for the PT-EX600U projector including short-throw, long-throw zoom and fixed-throw lenses for rear projection use. The additional lenses make it easy to adapt the projector to each installation site. The lenses attach and detach with one -touch ease.

Additional features of the PT-EX600U include a built-in 10-W speaker and a quiet design which keeps noise levels down to a quiet 31-dB which does not interrupt meetings or classes. Side-by-side and picture-in-picture functions provide effective presentations and lectures. Two different image sources can be simultaneously displayed onto a single screen. By switching to picture-in-picture mode you can display a sub-window onto the main screen and position in any of the four corners.

Ease of filter and lamp replacement make the total cost of ownership low on the PT-EX600U. The filter is easily replaced from the side and the lamp from the top of the projector allowing for ease in maintenance.

Specs

UPC Code:: 885170073449 
Power Supply: 100 - 240 V AC, 50/60 Hz
Power Consumption: 490 W (0.4 W with STANDBY MODE set to ECO,1 11 W with STANDBY MODE set to NETWORK.)
LCD PANEL:  
Panel Size: 20.0 mm (0.80 inches) diagonal (4:3 aspect ratio)
Display Method: Transparent LCD panel (x 3, R/G/B)
Drive Method: Active matrix
Pixels: 786,432 (1,024 x 768) x 3,total of 2,359,296 pixels
Lens: Powered zoom (throw ratio 1.7-2.8:1), powered focus F 1.7-2.3, f 26.9-45.4 mm
Lamp: 330 W UHM lamp x 1, lamp replacement cycle: 4,000 hours2
Screen size (diagonal): 1.02-10.16 m (40-400 inches) (4:3 aspect ratio)
Color reproducibility: Full color (16,777,216 colors)
Brightness : 6,000 lm3
Center-to-corner uniformity: 90%3
Contrast : 5,000:1 (full on/off, lamp power: Auto/Normal, iris: On)3
Resolution: 1,024 x 768 pixels4
SCANNING FREQUENCY:  
HDMI/DVI-D: (Horizontal) 26-80 kHz; (Vertical) 23-85 Hz; (Dot clock) 162 MHz or lower
RGB (analog): (Horizontal) 15-120 kHz; (Vertical) 48-100 Hz; (Dot clock) 230 MHz or lower (Signals exceeding the dot clock rate of 140 MHz are downsampled)
YPBPR (YCBCR): fH: 15.75 kHz, fV: 60 Hz [480i (525i)]
fH: 31.50 kHz, fV: 60 Hz [480p (525p)]
fH: 45.00 kHz, fV: 60 Hz [720 (750)/60p]
fH: 33.75 kHz, fV: 60 Hz [1035/60i]
fH: 28.13 kHz, fV: 50 Hz [1080 (1125)/50i]
fH: 28.13 kHz, fV: 50 Hz [1080/25sF]
fH: 27.00 kHz, fV: 48 Hz [1080/24sF]
fH: 33.75 kHz, fV: 60 Hz [1080/30sF]
fH: 56.25 kHz, fV: 50 Hz [1080/50p]
fH: 15.63 kHz, fV: 50 Hz [576i (625i)]
fH: 31.25 kHz, fV: 50 Hz [576p (625p)]
fH: 37.50 kHz, fV: 50 Hz [720 (750)/50p]
fH: 33.75 kHz, fV: 60 Hz [1080 (1125)/60i]
fH: 28.13 kHz, fV: 25 Hz [1080/25p]
fH: 27.00 kHz, fV: 24 Hz [1080/24p]
fH: 33.75 kHz, fV: 30 Hz [1080/30p]
fH: 67.50 kHz, fV: 60 Hz [1080/60p]
Video/S-Video: fH: 15.75 kHz, fV: 60 Hz [NTSC/NTSC4.43/PAL-M/PAL60], fH: 15.63 kHz, fV: 50 Hz [PAL/PAL-N/SECAM]
Optical Axis Shift:  
Vertical: ±50% from center of screen (powered)
Horizontal: ±10% from center of screen (powered)
Keystone correction range: Horizontal: ±30°6, vertical: ±40°6
Installation: Ceiling/floor, front/rear
Built-in speaker: 3.7 cm round shape x 1, output power 10.0 W (monaural)
Terminals:  
DVI-D in: DVI-D 24-pin x 1 (DVI 1.0 compliant, compatible with HDCP, compatible with single link only)
HDMI IN: HDMI 19-pin x 1 (Deep Color, compatible with HDCP)
RGB IN: D-sub HD 15-pin (female) x 1 (RGB x 1)
RGB, 5BNC IN/VIDEO IN: BNC x 5 (RGB/YPBPR/YCBCR x 1), shared with VIDEO IN (BNC x 1)(composite video)
COMPONENT/VIDEO IN: RCA x 3 (YPBPR/YCBCR/composite video x 1)
S-VIDEO In: Mini DIN 4-pin x 1
MONITOR OUT: D-sub HD 15-pin (female) x 1 (RGB x 1)
AUDIO IN 1: M3 x 1 (L-R x 1)
AUDIO IN 2: M3 x 1 (L-R x 1)
AUDIO IN 3: RCA pin x 2 (L/R x 1) for VIDEO/S-VIDEO input
AUDIO OUT: M3 x 1 (L-R x 1) for output (variable)
SERIAL IN: D-sub 9-pin (female) x 1 for external control (RS-232C compliant)
REMOTE IN: M3 Jack x 1 (for wired remote control)
LAN: RJ-45 x 1 (for network connection, 100BASE-TX/10BASE-T, compliant with PJLink™ (class 1))
Cabinet materials: Molded plastic (PC + ABS)
Dimensions (W X H X D): 489.5 x 1648 x 434 mm (19.3" x 6.5"8 x 17.1") (with supplied lens)
Weight : Approximately 10.3 kg (22.7 lbs) (with supplied lens)7
Noise level: 37 dB (Lamp power: Normal); 31 dB (Lamp power: Eco1 or Eco2)7
Operating temperature : 0°C-40°C (32°F-104°F)9
Operating humidity: 20% - 80% (no condensation)
Supplied accessories: Power cord x 1( x 2 for PT-EZ570E/EZ570EL, PT-EW630/EW630EL, PT-EX600E/EX600EL), power cord holder/power
cord cover x 1, wireless/wired remote control unit x 1, batteries (AAA/R03/LR03 type x 2), computer cable (1.8 m,
for VGA) x 1, Software CD-ROM (Logo Transfer Software, Multi Projector Monitoring & Control Software) x1
 
1 When the STANDBY MODE is set to ECO, network functions such as power on over the LAN will not operate. Also, only certain commands can be received for external control using the serial terminal.
2 This is the maximum value when the lamp power is set to Eco1 or Eco2 mode where the lamp is turned on for 2 hours and off for 0.25
hours. If the lamp is turned on more times or kept on for a long time, the lamp replacement cycle will shorten. In Normal mode, the
lamp replacement cycle is 3,000 hours. The usage environment affects the duration of the lamp
3 Measurement, measuring conditions, and method of notation all comply with ISO 21118 international standards.
4 Input signals that exceed the native resolution will be converted to the native resolution.
5 The axis shift function cannot be used with the ET-ELW21.
6 With the supplied lens. Value differs when the correction for both directions is operated.
7 Average value. May differ depending on models.
8 With legs at shortest position.
9 The operating temperature range is 0°C to 30°C (32°F to 86°F) when the fan control is set to ON 1 for altitudes from 1,000 m to 2,000
m (3,281 ft to 6,562 ft) above sea level, 0°C to 30°C (32°F to 86°F) when the fan control is set to ON 2 for altitudes from 2,000 m to
2,700 m (6,562 ft to 8,858 ft) above sea level.
Automatic Picture Position: Yes
Reduce Screen Image Retection:  
Screen Saver: Yes
Wobbling: Yes
AUTO Power Off: Yes
Reduce Power Consumption:  
Standby Save: Yes
No Signal Power Off: Yes
ECO mode: Yes
Other functions:  
Input Lock: Yes
Button Lock: Yes
Remote-control User Level: Yes
Failover input: Yes
Orientation: Landscape/Portrait
Options:  
Pedestal: TY-ST20-K
HD-SDI Terminal Board: TY-FB10HD
  
1: An approximate time until the panel brightness decreases to half of its original value.
2: Based on IEC 62087 Ed.2 measurement method.
3: When unit is stored in an environment where temperature is 104° - 140°, humidity level should be between 20%-40%.
*Specifications are subject to change without notice.
 

Accessories

model description

News & Reviews

"A great all-around projector that can be used for business, education and medical settings,at a lower price point than many
projectors with its capabilities."
-About.com