PT-EX800ZU

The new PT-EX800ZU LCD projector with XGA resolution (1,024 x 768), 7,500 lumens of brightness and a contrast ratio of 5,000:1, offers a versatile solution for high-impact presentations even in bright conditions. The PT-EX800ZU features the highly durable optical engine with inorganic LCD panels and polarizers providing up to 10,000 hours of maintenance free service. The PT-EX800ZU offers a long lasting eco filter (up to 15,000 hours) and a long lamp replacement cycle of up to 4,500 hours when set on ECO. The PT-EX800ZU has powered lens shift and zoom and a mechanical shutter as well as a wide selection of optional lenses including short-throw, long-throw zoom and fixed-throw lenses for rear projection use.
How to Buy

Overview

The new sleek and compact PT-EX800ZU LCD projector with XGA resolution (1,024 x 768) produces a brightness of up to 7,500 lumens. The iris automatically adjusts itself to match the situation, resulting in a high contrast ratio of 5,000:1, The PT-EX800ZU offers a versatile solution for numerous applications including university lecture rooms, engineering or art classes, and large company meeting rooms.

The PT-EX800ZU features the highly durable optical engine with inorganic LCD panels and polarizers providing up to 10,000 hours of service without maintenance. The PT-EX800ZU offers low maintenance with the dust-resistant cabinet design and a washable Eco filter that needs no replacement for up to 15,000 hours. The PT-EX800ZU offers a long lamp replacement cycle of up to 4,500 hours. With the lamp power set to Auto, the intelligent lamp control system automatically adjusts the lamp output in accordance with the brightness of the projected image and reduces it by up to 70%. It also combines with color shift correction, which corrects the shift in the color balance that occurs when the lamp out put drops, resulting a reduction in power consumption while excellent color reproduction is maintained.

Equipped with a DIGITAL LINK terminal, the PT-EX800ZU allows transmission of HDMI, uncompressed HD digital video, audio and control signals (Ethernet, RS-232C) for up to 100 meters (328 feet) through a single CAT5e (STP) cable or higher. This simplifies cabling and system upgrades, making it ideal for ceiling-mounted and other permanent installations.

Choose from a wide lineup of lenses for the PT-EX800ZU projector including short-throw, long-throw zoom and fixed-throw lenses for rear projection use. The additional lenses make it easy to adapt the projector to each installation site. The lenses attach and detach with one –touch ease. The projector also provides the versatility of powered lens shift, zoom, and focus, allowing full control of picture adjustment via a remote control.

Additional features of the PT-EX800ZU include a built-in 10-W speaker and a quiet design which keeps noise levels down to a quiet 29-dB avoiding the interruptions of meetings or classes. Side-by-side and picture-in-picture functions provide effective presentations and lectures. Two different image sources can be simultaneously displayed onto a single screen. By switching to picture-in-picture mode you can display a sub-window onto the main screen and position in any of the four corners. The projector is also DICOM-Compatible for presentations relating to medical applications, reproducing complex images with exceptionally high levels of detail and contrast.

Ease of filter and lamp replacement make the total cost of ownership low on the PT-EX800ZU. The filter is easily replaced from the side and the lamp from the top of the projector allowing for ease in maintenance.

News & Reviews

Specs

UPC Code: 885170178564
Power Supply: 100 - 240 V AC, 50/60 Hz
Power Consumption: 575 W (0.3 W when STANDBY MODE set to ECO¹, 10 W when STANDBY MODE set to NORMAL (37 W when STANDBY MODE of AUDIO SETTING set to ON))
Panel Size: 20.0 mm (0.79 inches) diagonal (4:3 aspect ratio)
Display Method: Transparent LCD panel (x 3, R/G/B)
Drive Method: Active matrix
Pixels: 786432 (1,024 x 768) x 3, total of 2,359,296 pixels
Lens: Powered zoom (throw ratio 1.7-2.8:1), powered focus F 1.7-2.3, f 26.9-45.4 mm
Lamp: 400 W UHM lamp x 1, lamp replacement cycle (lamp power: Normal/Eco1/Eco2): 3,000 hours/4,000 hours/4,500 hours2
Screen size (diagonal): 1.02-10.16 m (40-400 inches) (4:3 aspect ratio)
Brightness : 7,500 lm (lamp power: Auto/Normal, Dynamic mode, Standard lens)3
Center-to-corner uniformity: 90%&3
Contrast : 5,000:1 (full on/full off, lamp power: Auto, iris: On)3
Resolution: 1,024 x 768 pixels4
DVI-D/
HDMI/
DiplayPort/
DIGITAL LINK: 
Dot clock: 25-162 MHz
(VGA: 640 x 480 pixels to WUXGA: 1,920 x 1,200 pixels, VESA CVT-RB compliant)
RGB (analog): (Horizontal) 15-91 kHz; (Vertical) 24-120 Hz; (Dot clock) 162 MHz or lower (Signals exceeding the dot clock rate of 162 MHz are downsampled.)
YPBPR (YCBCR): fH: 15.75 kHz, fV: 60 Hz [480i (525i)]
fH: 31.50 kHz, fV: 60 Hz [480p (525p)]
fH: 45.00 kHz, fV: 60 Hz [720 (750)/60p]
fH: 33.75 kHz, fV: 60 Hz [1035/60i]
fH: 28.13 kHz, fV: 50 Hz [1080 (1125)/50i]
fH: 28.13 kHz, fV: 50 Hz [1080/25sF]
fH: 27.00 kHz, fV: 48 Hz [1080/24sF]
fH: 33.75 kHz, fV: 60 Hz [1080/30sF]
fH: 56.25 kHz, fV: 50 Hz [1080/50p]
fH: 15.63 kHz, fV: 50 Hz [576i (625i)]
fH: 31.25 kHz, fV: 50 Hz [576p (625p)]
fH: 37.50 kHz, fV: 50 Hz [720 (750)/50p]
fH: 33.75 kHz, fV: 60 Hz [1080 (1125)/60i]
fH: 28.13 kHz, fV: 25 Hz [1080/25p]
fH: 27.00 kHz, fV: 24 Hz [1080/24p]
fH: 33.75 kHz, fV: 30 Hz [1080/30p]
fH: 67.50 kHz, fV: 60 Hz [1080/60p]
Video/YC: fH: 15.75 kHz, fV: 60 Hz [NTSC/NTSC4.43/PAL-M/PAL60],
fH: 15.63 kHz, fV: 50 Hz [PAL/PAL-N/SECAM]
Vertical Optical axis shift: ±50% from center of screen (powered)
Horizontal Optical axis shift: ±10% from center of screen (powered)
Keystone correction range: Vertical ±40°, horizontal ±30°6
Installation: Ceiling/floor, front/rear
Built-in speaker: 3.7 cm round shape x 1, output power 10.0 W (monaural)
DVI-D in: DVI-D 24-pin x 1 (DVI 1.0 compliant, compatible with HDCP, compatible with single link only)
HDMI IN: HDMI 19-pin x 1 (Deep Color, compatible with HDCP)
DisplayPort IN: DP-20P x 1 (DisplayPort 1.1, compatible with HDCP),
audio signal: Linear PCM (Sampling frequency: 48 kHz/44.1 kHz/32 kHz)
RGB 1 IN: D-sub HD 15-pin (female) x 1 (RGB x 1)
RGB 2 IN: BNC x 5 (RGB/YPBPR/YCBCR x 1), shared with VIDEO IN (BNC x 1) (composite video)
VIDEO In: Pin jack x 1 (composite video)
MONITOR OUT: D-sub HD 15-pin (female) x 1 (RGB x 1) (not compatible with all inputs)
AUDIO IN: Pin jack x 2 (L/R x 1), M3 x 2 (L-R x 2)
AUDIO OUT: M3 x 1 (L-R x 1) for output (variable)
SERIAL IN: D-sub 9-pin (female) x 1 for external control (RS-232C compliant)
REMOTE IN: M3 Jack x 1 (for wired remote control)
REMOTE 2 IN: D-sub 9-pin (female) x 1 for external control (parallel)
LAN /
DIGITAL LINK: 
RJ-45 x 1 (for network and DIGITAL LINK (video/audio/network/serial control) connection, 100Base-TX, compliant with PJLink™, HDCP compatible, Deep Color compatible)
Cabinet materials: Molded plastic (PC + ABS)
Filter: x 1, recommended replacement cycle: 15,000 hours7
Dimensions (W X H X D): 530 x 177*8 x 445 mm (20-7/8 x 6-31/32*8 x 17-1/2 in) (with supplied lens)
Weight : Approximately 10.6 kg (23.4 lbs) (with supplied lens)9
Noise level : 37 dB (dual lamp operation, lamp mode: NORMAL),2
31 dB (dual lamp operation, lamp mode: ECO 1),2
29 dB (dual lamp operation, lamp mode: ECO 2)2
Operating temperature 10°C-40°C (32°F-104°F)10
Operating humidity: 20% - 80% (no condensation)
Supplied accessories: Power cord x 1 ( including power cord Holder) power cord holder/power cord cover x 1, wireless/wired remote control unit x 1, batteries (AAA/R03/LR03 type x 2),
computer cable (1.8 m, for VGA) x 1, Software CD-ROM (Logo Transfer Software, Multi Projector Monitoring & Control Software) x1
Footnotes: * Product model numbers vary depending on the market.
* The PT-EW730ZUL delivers the same performance as the PT-EW730ZU, but comes without a lens.
1 When the STANDBY MODE is set to ECO, network functions such as power on over the LAN will not operate. Also, only certain commands can be received for external control using the serial terminal.
2 This is the maximum value when the lamp power is set to Eco1 or Eco2 mode where the lamp is turned on for 2 hours and off for 0.25 hours. If the lamp is turned on more times or kept on for a long time,
the lamp replacement cycle will shorten. In Normal mode, the lamp replacement cycle is 3,000 hours. The usage environment affects the duration of the lamp
3 Measurement, measuring conditions, and method of notation all comply with ISO 21118 international standards.
4 Input signals that exceed the native resolution will be converted to the native resolution.
5 The axis shift function cannot be used with the ET-ELW21.
6 With the supplied lens. Value differs when the correction for both directions is operated.
7 The usage environment affects the duration of the filter.
8 With legs at shortest position.
9 Average value. May differ depending on models.
10 The operating temperature range is 0 °C to 40 °C (32 °F to 104 °F) when used at altitudes between from 1,400 m to 2,700 m (4,593 ft to 8,858 ft) above sea level.
Also, if the ambient temperature exceeds 40 °C (104 °F) (35 °C (95 °F) at high altitude), the LAMP POWER may be automatically switch to Eco 2 to in oeder to protect the projector.
 
1 The operating temperature range is 0°C (32°F) to 40°C (104°F) when used in High-Altitude mode (1,400 m [4,593 feet] to 2,700 m [8,858 feet]). Also, if the ambient temperature exceeds 40°C (104°F) (35°C [95°F] in High-Altitude mode) when using all four lamps, the light output may be reduced approximately 30% to protect the projector.: 

Accessories

model description