PT-ST10U

1024 x 768 XGA resolution short throw LCD projector with 2,800 lumens of brightness
How to Buy

Overview


The PT-ST10U can project an impressive 80–inch diagonal image from just 2.7-feet away from the screen, allowing users to create big pictures in tight spaces such as small classrooms, conference rooms and trade show booths.

Enhancing its go-to educational application, the PT-ST10U is ideal for use with Interactive White Boards, and offers a White Board Mode that automatically adjusts brightness to suit the white board surface. The short throw projector can be matched with Panasonic's latest elite Panaboard, the UB-T880 Interactive Whiteboard, for enhanced classroom solutions. The UB-T880 has a collapsible projector mount, enabling the whiteboard to be easily moved from room to room without detaching the projector.

The PT-ST10U offers 1024 x 768 XGA resolution and produces 2,800 lumens of brightness. The compact projector weighs approx. 6 1/2 pounds. The PT-ST10 incorporates Panasonic's Intelligent Power Management, new circuitry that ensures continuous supply of power for stable operation even if electricity fluctuates for a short duration. Exclusive Daylight View™ Basic technology measures surrounding illumination with a built-in ambient light sensor, and corrects the image in real-time to project clear, crisp images even in brightly-lit rooms, producing lifelike images with remarkable depth.

For added flexibility, a wired LAN connection enables remote operation, which is especially ideal for ceiling-mounted use. Multi Projector Monitoring and Control Software is available for monitoring and controlling multiple Panasonic projector from a single PC, which means a projector's status and condition can be checked without anyone having to physically walk to the room where it is installed.

The ecological design of the PT-ST10U greatly reduces any environmental impact, with power consumption a mere 0.4W in Eco Standby Mode. Direct Power Off utilizes accumulated power to keep the cooling fan operating until the lamp is cooled, so the operator can disconnect the power cable immediately after use.

Ease of operation and installation are facilitated by several advanced functions, including: Speed Start, slashing the time it takes to begin a presentation, with an image appearing about five seconds after the power button is pressed; One-Touch Auto Setup, automatically correcting the image position when the projector's input signal changes; a built-in gravity sensor correcting automatically for keystone distortion; and a Logo Transfer application enabling a user to customize a start-up logo.

News & Reviews

Specs

Power Supply: 100–240 V AC, 50/60 Hz
Power Consumption: 300 W (0.4 W in ECO 1 W in normal standby mode. 18 W in normal standby mode when set to audio monitor out and with fan stopped.)
Optical system: Dichroic mirror separation/prism synthesis system
LCD panel - Panel size: 16 mm (0.63") diagonal, 4:3 aspect ratio
LCD panel - Display method: Transparent LCD panel (x 3, R/G/B)
LCD panel - Drive method: Active matrix
LCD panel - Pixels: 786,432 (1,024 x 768) x 3, total of 2,359,296 pixels
LCD panel - Pixel configuration: Stripe
Lens: Fixed, manual focus, F 1.80, f 6.74 mm
Lamp: 220 W UHM lamp
Projection size: 1.52-2.79 m(60-110 inches) (4:3 aspect ratio)
Colors: Full color (16,777,216 colors)
Brightness 22,800 lumens
Center-to-corner uniformity: 0.85
Contrast Ratio: 500:1 (full on/full off)
Resolution (RGB): 1,024 x 768 pixels (Input signals that exceed this resolution will be converted to 1,024 x 768 pixels.)
Scanning frequency - RGB: Horizontal: 15–91 kHz, Vertical: 50–85 Hz
Scanning frequency - YPBPR: 480i (525i): fH 15.75 kHz; fv 60 Hz
576i (625i): fH 15.63 kHz; fv 50 Hz
480p (525p): fH 31.50 kHz; fv 60 Hz
576p (625p): fH 31.25 kHz; fv 50 Hz
720 (750)/60p: fH 45.00 kHz; fv 60 Hz
720 (750)/50p: fH 37.50 kHz; fv 50 Hz
1080 (1125)/60i: fH 33.75 kHz; fv 60 Hz
1080 (1125)/50i: fH 28.13 kHz; fv 50 Hz
1080 (1125)/60p: fH 67.50 kHz; fv 60 Hz
1080 (1125)/50p: fH 56.25 kHz; fv 50 Hz
Scanning frequency - S-Video/Video: NTSC, NTSC4.43, PAL-M, PAL60: fH15.75 kHz; fv 60 Hz
PAL, SECAM, PAL-N: fH15.63 kHz; fv 50 Hz
Optical Axis Shift: 10:-0.5 (fixed)
Keystone correction range: Vertical: approx. ±10°
On-screen menu: 17 languages: English, French, German, Spanish, Italian, Korean, Russian, Chinese, Japanese, Swedish, Norwegian, Danish, Portuguese, Polish, Hungarian, Czech, and Thai
Installation: Front/rear, ceiling/desk (menu selection)
Built-in speakers: 4cm-2cm (1-1/16”-25/32”) (oval) x 1
Terminals - COMPUTER (RGB) 1 IN: D-sub HD 15-pin (female) x 1
RGB signal:
G: 0.7 V [p-p] (1.0 V [p-p] for sync on green signals), 75 ohms, R, B: 0.7 V [p-p], 75 ohms, HD/SYNC, VD: TTL (positive/negative polarity compatible)
YPBPR signal:
Y: 1.0 V [p-p] (including sync signal), 75 ohms, PB, PR: 0.7 V [p-p], 75 ohms
Terminals - COMPUTER (RGB) 2 IN: D-sub HD 15-pin (female) x 1
RGB signal:
G: 0.7 V [p-p] (1.0 V [p-p] for sync on green signals), 75 ohms, R, B: 0.7 V [p-p], 75 ohms, HD/SYNC, VD: TTL (positive/negative polarity compatible)
YPBPR signal:
Y: 1.0 V [p-p] (including sync signal), 75 ohms, PB, PR: 0.7 V [p-p], 75 ohms
Terminals - VIDEO IN: RCA pin x 1, 1.0 V [p-p], 75 ohms
Terminals - S-VIDEO IN: Mini DIN 4-pin x 1, Y: 1.0 V [p-p], C: 0.286 V [p-p], 75 ohms
Terminals - AUDIO IN: M3 (L, R) x 2, 0.5 V [rms]
Terminals - VARIABLE AUDIO OUT: M3 (L, R) x 1, 0 –2.0 V [rms]
Terminals - SERIAL: D-sub 9-pin x 1, for external control (RS-232C compliant)
Terminals - LAN: RJ-45 x 1, compatible with PJLink™ (class 1), 10BASE-T/100BASE-TX
Power cord length: 4.4 m (14.4')
Cabinet material: Moulded plastic (PC+ABS)
Dimensions (W X H X D): 327 x 135 x 307 mm (12-7/8"x5-5/16"x12-3/32”)
Weight 3Approx. 3.1 kg (6.8 lbs.)
Operating Environment: Temperature: 0°–40°C (32°–104°F)
Humidity: 20%–80% (no condensation)
Supplied accessories: 
  • Power cord
  • Power cord secure lock
  • Wireless remote control
  • Batteries for remote control ( AAA type) x2
  • VGA cable
  • Application software (CD-ROM)
  • safety wire rope
  •  
    1 With the standby mode set to ECO. When the standby mode is set to ECO, network functions such as power on over the LAN network will not operate, and the serial output terminal cannot be used. Also, only certain commands can be received for external control using the serial terminal.: 
    2 Measurement, measuring conditions, and method of notation all comply with ISO 21118 international standards.: 
    3 Average value. May differ depending on models.: 

    Accessories

    model description
    ET-LAB2 Replacement Lamp
    How to Buy
    certified0
    ET-KFB2 Filter
    How to Buy
    certified0
    ET-RFB2 Replacement Filter
    How to Buy
    certified0
    ET-PKB2 Ceiling Mount Bracket
    How to Buy
    certified0
    ET-TRM110 Transmitter for PT-AE7000U/PT-8000U 3D projectors
    How to Buy
    certified0