PT-VX400NTU

The Panasonic PT-VX400NTU wireless projector provides mobility, 4,000 lumens of brightness and is equipped with a lamp that has a 5,000-hour replacement cycle and a 3-layer air filter with a 6,000-hour filter replacement cycle. With a 1.6x zoom lens and auto keystone feature, installation, setup and operation is easy. The PT-VX400NTU projector also includes a wide array of features including a 10-watt speaker and microphone input for audio playback directly from the projector, a built-in closed caption decoder and a carrying bag with a handy shoulder strap. Dependable and portable projectors, this series is ideal for use in corporate conference rooms, training rooms, classrooms and more.
How to Buy

Overview

The PT-VX400NTU is a wireless capable projector that provides users with mobility and delivers 4,000 lumens of brightness in a compact form-factor. Equipped with a lamp that has a 5,000-hour1 replacement cycle and an original 3–layer air filter with a 6,000-hour2 filter replacement cycle, labor and expense typically attributed to periodic maintenance is greatly reduced. With a 1.6x zoom lens and auto keystone feature, installation, setup and operation is easy. Users can expect superb performance, quiet operation and with intelligent lamp control, minimal environmental impact. This reliable projector is ideal for use in corporate conference rooms, training rooms and classrooms.


1 This is the maximum value when the lamp power is set to Eco1, Eco2, with the lamp turned on for 2 hours and off for 0.25 hours. Increases in the lamp on cycle or extended use with the lamp continuously turned on will shorten the lamp replacement cycle. When the lamp power is set to Normal, the lamp replacement cycle is 3,000 hours.The usage environment affects the lamp replacement cycle.
2 With the lamp power set to Eco1, Eco2. The usage environment affects the duration of the filter.

News & Reviews

Specs

Panel Size: 0.63 inches diagonal (4:3 aspect ratio)
Display Method: Transparent LCD panel (x 3, R/G/B)
Pixels: 786,432 (1,024 × 768) x 3, total of 2,359,296 pixels
Lamp: 245 W × 1
Brightness4,000 lm (lamp power: Auto/Normal)
Contrast Ratio2,000:1
Resolution: 1,024 × 768 pixels
Lens: 1.6x manual zoom (throw ratio: 1.2–1.9:1), manual focus, F 1.65–2.33, f 15.47–24.53 mm
Screen Size: 0.76–7.62 m (30–300 inch)
Optical Axis Shift: 9:01
Scanning Frequency - HDMI: Horizontal: 15–80 kHz, vertical: 50–85 Hz, dot clock: 162 MHz or lower
Scanning frequency - RGB: fH: 15–100 kHz, fV: 50–100 Hz, dot clock: 140 MHz or lower
Scanning frequency - YPBPR (YCBCR): fH: 15.75 kHz, fV: 60 Hz [480i(525i)]

fH: 31.50 kHz, fV: 60 Hz [480p(525p)]

fH: 45.00 kHz, fV: 60 Hz [720(750)/60p]

fH: 33.75 kHz, fV: 60 Hz [1080(1125)/60i]

fH: 15.63 kHz, fV: 50 Hz [576i(625i)]

fH: 31.25 kHz, fV: 50 Hz [576p(625p)]

fH: 37.50 kHz, fV: 50 Hz [720(750)/50p]

fH: 28.13 kHz, fV: 50 Hz [1080(1125)/50i]
S-Video/Video: fH: 15.75 kHz, fV: 60 Hz [NTSC/NTSC4.43/PAL-M/PAL60], fH: 15.63 kHz, fV: 50 Hz [PAL/PAL-N/SECAM]
HDMI: HDMI 19-pin x 1 (compatible with HDCP)

480p, 576p, 720/60p, 720/50p, 1080/60i, 1080/50i, 1080/60p, 1080/50p,

VGA (640 x 480)-WUXGA (1,920 x 1,200)3, compatible with non-interlaced signals only, dot clock: 25 -162 MHz
COMPUTER IN 1: D-sub HD 15-pin (female) x 1 (RGB/YPBPR/YCBCR x 1)
COMPUTER IN 2 / MONITOR OUT: D-sub HD 15-pin (female) x 1 (RGB×1), (input/output selectable using on-screen menu)
(When Monitor Out is selected, the COMPUTER IN 1 signal is output.)
VIDEO In: RCA pin × 1 (composite video)
S-VIDEO In: Mini DIN 4-pin × 1 (S-Video)
AUDIO IN: RCA pin x 2 (L-R x 1) for VIDEO/S-VIDEO input
COMPUTER AUDIO IN 1: M3 x 1 (L-R x 1)
COMPUTER AUDIO IN 2 (MIC IN): M3 x 1 (L-R x 1) for audio input or for microphone connection (variable)
AUDIO OUT: M3 x 1 (L-R x 1) for output (variable)
SERIAL IN: D-sub 9-pin (male) × 1 for external control (RS-232C compliant)
LAN: RJ-45 × 1 (for network connection, 10Base-T/100Base-TX, compliant with PJLink (class 1))
Built-in speaker: 3.7 cm round shape × 1, output power: 10 W (monaural)
Noise level: 35 dB (lamp power: Normal), 29 dB (lamp power: Eco1, Eco2)
Installation: Ceiling/floor
Power Supply: 100-240 V AC, 50/60 Hz
Power Consumption: 322 W (0.48 W when standby mode set to Eco4, 10.0 W when standby mode set to Network.)
Dimensions (W X H X D): 13.8" x 3.8" x 10.9" (with legs at shortest position, not including protruding parts)
Weight: Approximately 7.7 lbs
Operating Temperature: 5°C–35°C (41°F–95°F)
Operating humidity: 20%-80% (no condensation)
Supplied accessories: Power cord x 1 (x 2 for PT-VW330EA/VX400EA), wireless remote control unit, batteries (R03/AAA type × 2), carrying bag x 1, VGA cable x 1, filter cover, software CD-ROM (Logo Transfer Software, Multi Projector Monitoring & Control Software)
Footnotes: 1The values given for the recommended lamp replacement cycles are maximum
2Measurement, measuring conditions, and method of notation all comply with ISO 21118 international standards

3 Compliant with VESA CVT-RB
4When Standby mode is set to Eco, network functions such as standby on via LAN are not available. Also, only certain commands can be received for external control using the serial terminal.
 

Accessories

model description
ET-LAV100 Replacement lamp unit for PT-VW330 Series (includes PTVW330U, PT-VX400U and PT-VX400NTU projectors)
How to Buy
certified0
ET-RFV100 Replacement filter unit for PT-VW330 Series (includes PTVW330U, PT-VX400U and PT-VX400NTU projectors)
How to Buy
certified0
ET-PKV100B Projector mount base for PT-VW330 Series (includes PTVW330U, PT-VX400U and PT-VX400NTU projectors)
How to Buy
certified0
ET-PKV100H High ceiling mount bracket for: PTVW330U, PT-VX400U, PT-VX400NTU, PT-TW230U, PT-TW231RU, PT-LW25HU, PT-LX30HU and PT-LX26HU projectors (mount base required)
How to Buy
certified0
ET-PKV100S Low ceiling mount bracket for: PTVW330U, PT-VX400U, PT-VX400NTU, PT-TW230U, PT-TW231RU, PT-LW25HU, PT-LX30HU and PT-LX26HU projectors (mount base required)
How to Buy
certified0
ET-TRM110 Transmitter for PT-AE7000U/PT-8000U 3D projectors
How to Buy
certified0