FAQs
DLP
The On Screen Display may be turned off. Press the OSD button on the remote.
AUTO SIGNAL under OPTION 1 menu may be turned ON. If so, this overrides the memory settings
If the projector is in DUAL lamp mode, both lamps have to be the same type, either normal-life or long-life bulbs. If one of a different type is installed while projector is in DUAL mode, it will not light.
Press arrow down key on remote twice and then ENTER key
The INPUT RESOLUTION under the ADVANCED MENU may be set wrong.
If the incoming signal is 1280 X 1024 it may not be recognized by the AUTO SETUP circuit. Try setting SXVGA MODE to SXVGA+ under the ADVANCED MENU.
The sub-memory could have been corrupted. Please review the owner's manaul to see how to clear the sub-memory.
The electrical contacts between lens and unit may have come loose. Remove lens and reinstall.
This is normal because the lens is a very short throw and the lens elements are very close together, and when lens shift is used, you are shooting out the edge of the lens. That is why we do not recommend LENS SHIFT with this lens.
M88 size, .75mm thread pitch
No. This is confidential information.
1500 hours. CHANGE LAMP indication comes on at 1300 hours.
2000 hours. CHANGE LAMP indication comes on at 1800 hours.
4000 hours. CHANGE LAMP indication comes on at 3800 HOURS. THIS IS THE ONLY MODE FOR LONG-LIFE BULBS!!
2000 hours for NORMAL mode; 3000 hours for LOW mode.
Only the quad pack comes with a replacement filter.
65% propylene glycol, 35% pure water.
18AWG
10,800 RPM. 180 per second = 60 fields x 3 (red, green, blue components of image).
Select MENU/NETWORK/STORE and press the DEFAULT key for more than three seconds. The projector will then prompt INITIALIZE YES or NO, and select YES.
M6 X 12 metric
M6 X 12 metric
M6 x 25 metric
IIS:AUX The optional board is the auxiliary input.
LCD
The projector may be in KEY LOCK mode, which locks out the buttons on the unit. Try turning on with the remote. If you do not have the remote, press ENTER and MENU on the unit for longer than five seconds to power up the unit.
Set SCREEN FORMAT in OPTION to 16X10 (pgs. 33,44,45 in operator's manual).
M4 X 12
TCP4352
HOME THEATER
1.2A
1.2A
1.2A
1.2A
1.2A
1.3A
No.
No
Yes
Yes
Yes. It is not guaranteed for all sources.
Yes. It is not guaranteed for all sources.
M4 x 12 metric
M4 x 12 metric
N2QAYB000064
EUR7914Z40
Yes.
No.
TXFKN01VKD3
TXFKN01VKD4
No.
96HZ (4X24HZ). Each frame is displayed simply four times sequentially, then the next frame four times and so on.
Not correctly. This format is for acquisition, storage, distribution and editing when passing the signal through electronics designed for interlace signals. It is not a standard for display of final content, which is the main design principle of the home theater projector. These projectors are used by several Hollywood postproduction facilities during editing, and the lack of support for this format has never been an issue. This format is only supported on our 3 chip DLP® projectors.
NEWS 
EVENTS
LEARN MORE
EVENTS
WIRELESS PANASONIC PROJECTORS
Panasonic Develops New App for Wireless Panasonic ProjectorsLEARN MORE
