About Scene Files for the AG-HPX500
The AG-HVX200A, AG-HPX170 and the AG-HPX500 are cameras that have a similar menu structure that is unique among the Panasonic line of cameras because each of these cameras has a scene file dial, allowing the operator to choose one of six scene files, also referred to as "looks." In reality, the look is only a portion of the total scene file. A look will change the way the camera sees tones and color, but a scene file can change everything about the way a camera performs.
Each of these scene files contains only one look, rather than six different looks that customarily change with each turn of the scene file dial.
To change a look, you must change the scene file's parameters for tone and color. Panasonic has done that for you by creating many different scene files for each of these cameras.
There are 16 scene files for the HPX500. Each file contains six scene files that change with the rotation of the scene file dial on the rear of the camera (F1-F6). When taken with the factory defaults, these provide a total of 22 different looks for the camera.
For proper use of the following scene files, your camera must be white-balanced to the "A" channel. Many of the files below have color spaces that are not "legal" by NTSC standards. This is because the colors are oversaturated. Because HD has no such "legal" limits, these colors can be captured by the camera but will be clipped in an NTSC transmission. However, they are useful when used in HD display or in a filmout. Nevertheless, it must be understood that oversaturation produces a diminished sense of form in the oversaturated colors that tend to emphasize a graphic or 2D effect on the image consistent with the flattening of the three-dimensional form. These effects are further helped by lighting choices on the set.
The scene files, CRISP, ADDSTOP and MUSICVD2 all use the synchro scan shutter. While the choice of degrees has been made in the menu, you are still required to use the Shutter switch on the front of the camera to set the shutter to the synchro scan position, at which time the degree angle from the menu will appear on your LCD display.
Installing Scene FilesTo change the scene files in your camera please follow these steps.
- Insert an SD card into the SD slot in your camera. Press MENU. Navigate to Card functions and format the card.
- Now, you must save the current scene files that are in the camera to the SD card in order to create a folder that will be used to receive the new scene files. CARD FUNCTIONS>SCENE FILE>YES>FILE SELECT>WRITE
- Remove the SD card and insert it in your computer using a card reader (or the SD slot in your PC).
- Click on and open the SD card's icon to see its contents. You will see a folder named PRIVATE. Navigate down through the layers of folders until you get to the last folder, P2SD, and you will see that its contents contain one or more files labeled SCENE1.TXT, SCENE2.TXT and so on, but be aware that no more than four will function on a card.
- Drag these files to the trash.
- Using up to four of the files supplied by Panasonic, replace their names with the same names as the files that went to the trash. All files at this level must be named accordingly or they will not be seen and read by the camera. No names can be duplicated. That is there can only be one SCENE1.TXT etc.
- Now, drag these files to the folder that formerly held the other .TXT files and eject the card from the computer
- Insert the SD card in the camera.
- Press MENU and navigate to
- CARD FUNCTIONS>SCENE FILE.
- 10. The four names of the scene files will appear in a list. You must choose one of these to load into your camera. Once you do that, you may choose from the six files by rotating the scene fie dial on your camera.
- For the 200A and 500 cameras, each of the looks supplied by Panasonic starts with a file that has a default frame rate in position one. The other five files are identical, except for a change in frame rate. They are:
AVC-ULTRA PRODUCTS ARE HERELearn about these new ultra quality, ultra efficient, ultra flexible products.
FREE SOFTWARE WITH PROFESSIONAL MIXER OR SWITCHER PURCHASEFrom now until June 30, 2014, purchase any of these models listed below and receive a Free copy of the powerful ProPresenter 5.0 graphics and titling software valued at $399.
SEE THE PROJECTS THE PROS ARE SHOOTING WITH THE HPX250
SEE THE PROJECTS THE PROS ARE SHOOTING WITH THE AF100
FOR THE LATEST PRODUCT FIRMWARE DOWNLOADS
AC130/160 AVCCAM HOW-TO VIDEOSEmmy-nominated, Multimedia Person of the Year Bernie Mitchell shares his insights into the operation of our AC130/160 AVCCAM solid-state camcorders in a series of six instructional videos.
SHOOT IT. SHARE IT WINNERS ANNOUNCED. SEE THE WINNERS NOWWe had some amazing entries, and you had some tough choices to make. See who came out on top.