Specs - PT-EX500E / EL Installation- Panasonic

Panasonic values your privacy and your trust is important to us. We use cookies to enhance your website experience. By clicking “Accept all cookies”, you agree Panasonic can store cookies on your device and disclose information in accordance with our Privacy Policy. OK Learn More

AddedRemoved

See product page

Copy URL

PT-EX500E / EL

General	Power supply		100 – 240 V AC, 50/60 Hz
	Power consumption		490 W (0.4 W with STANDBY MODE set to ECO,*1 11 W with STANDBY MODE set to NETWORK.)
	LCD panel	Panel size	20.0 mm (0.80 inches) diagonal (4:3 aspect ratio)
		Display method	Transparent LCD panel (x 3, R/G/B)
		Drive method	Active matrix
		Pixels	786,432 (1,024 x 768) x 3, total of 2,359,296 pixels
	Lens	PT-EX500E	Powered zoom (throw ratio 1.7–2.8:1), powered focus F 1.7–2.3, f 26.9–45.4 mm
	Lens	PT-EX500EL	Optional powered zoom/focus lenses and fixed-focus lens
	Lamp		330 W UHM lamp x 1, lamp replacement cycle: 4,000 hours*2
	Screen size (diagonal)		1.02–10.16 m (40–400 inches) (4:3 aspect ratio)
	Color reproducibility		Full color (16,777,216 colors)
	Brightness*3		6,000 lm (lamp power: Auto/Normal)
	Center-to-corner uniformity ratio*3		0.9
	Contrast ratio*3		2,000:1 (full on/off, lamp power: Auto/Normal)
	Resolution		1,024 x 768 pixels*4
	Scanning frequency	HDMI/DVI-D	(Horizontal) 26–80 kHz; (Vertical) 23–85 Hz; (Dot clock) 162 MHz or lower
		RGB (analog)	(Horizontal) 15–120 kHz; (Vertical) 48–100 Hz; (Dot clock) 230 MHz or lower (Signals exceeding the dot clock rate of 140 MHz are downsampled.)
		YPBPR (YCBCR)	fH: 15.75 kHz, fV: 60 Hz [480i (525i)] fH: 31.50 kHz, fV: 60 Hz [480p (525p)] fH: 45.00 kHz, fV: 60 Hz [720 (750)/60p] fH: 33.75 kHz, fV: 60 Hz [1035/60i] fH: 28.13 kHz, fV: 50 Hz [1080 (1125)/50i] fH: 28.13 kHz, fV: 50 Hz [1080/25sF] fH: 27.00 kHz, fV: 48 Hz [1080/24sF] fH: 33.75 kHz, fV: 60 Hz [1080/30sF] fH: 56.25 kHz, fV: 50 Hz [1080/50p] fH: 15.63 kHz, fV: 50 Hz [576i (625i)] fH: 31.25 kHz, fV: 50 Hz [576p (625p)] fH: 37.50 kHz, fV: 50 Hz [720 (750)/50p] fH: 33.75 kHz, fV: 60 Hz [1080 (1125)/60i] fH: 28.13 kHz, fV: 25 Hz [1080/25p] fH: 27.00 kHz, fV: 24 Hz [1080/24p] fH: 33.75 kHz, fV: 30 Hz [1080/30p] fH: 67.50 kHz, fV: 60 Hz [1080/60p]
		Video/S-Video	fH: 15.75 kHz, fV: 60 Hz [NTSC/NTSC4.43/PAL-M/PAL60], fH: 15.63 kHz, fV: 50 Hz [PAL/PAL-N/SECAM]
	Optical axis shift*5	Vertical	±60% from center of screen (powered)
	Optical axis shift*5	Horizontal	±10% from center of screen (powered)
	Keystone correction range		Vertical: ±40°*6
	Installation		Ceiling/floor, front/rear
	Built-in speaker		3.7 cm round shape x 1, output power 10.0 W (monaural)
	Terminals	DVI-D IN (INPUT 1)	DVI-D 24-pin x 1 (DVI 1.0 compliant, compatible with HDCP, compatible with single link only)
		HDMI IN (INPUT 1)	HDMI 19-pin x 1 (Deep Color, compatible with HDCP)
		RGB IN (INPUT 1)	D-sub HD 15-pin (female) x 1 (RGB x 1)
		RGB 5BNC IN/ VIDEO IN (INPUT 2)	BNC x 5 (RGB/YPBPR/YCBCR x 1), shared with VIDEO IN (BNC x 1) (composite video)
		COMPONENT/ VIDEO IN (INPUT 3)	RCA x 3 (YPBPR/YCBCR/composite video x 1)
		S-VIDEO IN (INPUT 3)	Mini DIN 4-pin x 1
		MONITOR OUT	D-sub HD 15-pin (female) x 1 (RGB x 1)
		AUDIO IN 1	M3 x 1 (L-R x 1)
		AUDIO IN 2	M3 x 1 (L-R x 1)
		AUDIO IN 3	RCA pin x 2 (L/R x 1) for VIDEO/S-VIDEO input
		AUDIO OUT	M3 x 1 (L-R x 1) for output (variable)
		SERIAL IN	D-sub 9-pin (female) x 1 for external control (RS-232C compliant)
		REMOTE IN	M3 Jack x 1 (for wired remote control)
		LAN	RJ-45 x 1 (for network connection, 100BASE-TX/10BASE-T, compliant with PJLink™ (class 1))
		Cabinet materials	Molded plastic (PC + ABS)
	Dimensions (W × H × D)	PT-EX500E	489.5 x 1648 x 434 mm (19.3" x 6.5"8 x 17.1") (with supplied lens)
	Dimensions (W × H × D)	PT-EX500EL	489.5 x 1648 x 370 mm (19.3" x 6.5"8 x 14.6") (without lens)
	Weight*7	PT-EX500E	Approximately 10.3 kg (22.7 lbs) (with supplied lens)
	Weight*7	PT-EX500EL	Approximately 9.6 kg (21.2 lbs) (with supplied lens)
	Noise level*7		37 dB (Lamp power: Normal); 31 dB (Lamp power: Eco1 or Eco2)
	Operating temperature		0°C–40°C (32°F–104°F)*9
	Operating humidity		20% - 80% (no condensation)
	Supplied accessories		Power cord x 1( x 2 for PT-EW530E/EW530EL, PT-EX500E/EX500EL), power cord holder/power cord cover x 1, wireless/wired remote control unit x 1, batteries (AAA/R03/LR03 type x 2), computer cable (1.8 m, for VGA) x 1, Software CD-ROM (Logo Transfer Software, Multi Projector Monitoring & Control Software) x1,
Note:			1 When the STANDBY MODE is set to ECO, network functions such as power on over the LAN will not operate. Also, only certain commands can be received for external control using the serial terminal. 2 This is the maximum value when the lamp power is set to Eco1 or Eco2 mode where the lamp is turned on for 2 hours and off for 0.25 hours. If the lamp is turned on more times or kept on for a long time, the lamp replacement cycle will shorten. In Normal mode, the lamp replacement cycle is 3,000 hours. The usage environment affects the duration of the lamp 3 Measurement, measuring conditions, and method of notation all comply with ISO 21118 international standards. 4 Input signals that exceed the native resolution will be converted to the native resolution. 5 The axis shift function cannot be used with the ET-ELW21 . 6 With the supplied lens. Value differs when the correction for both directions is operated. 7 Average value. May differ depending on models. 8 With legs at shortest position. *9 The operating temperature range is 0 °C to 30 °C (32 °F to 86 °F) when the fan control is set to ON 1 for altitudes from 1,000 m to 2,000 m (3,281 ft to 6,562 ft) above sea level, 0 °C to 30 °C (32 °F to 86 °F) when the fan control is set to ON 2 for altitudes from 2,000 m to 2,700 m (6,562 ft to 8,858 ft) above sea level. Caution Do not install the projector in locations that are subject to excessive water, humidity, steam or oily smoke. Doing so may result in fire, malfunction or electric shock NOTES ON USE 1 The projector uses a high-voltage mercury lamp under high internal pressure. This lamp may break, emitting a popping sound, or fail to illuminate, due to impact or extended use. 2 The high-wattage lamp becomes very hot during operation. Please observe the following precautions: • Never place objects on top of the projector while it is in operation. • Make sure there is an unobstructed space of 1,000 mm (39-3/8 in) or more around the projector’s exhaust openings. • If stacking projector units, care must be taken to provide the recommended space between units. These space requirements also apply to installation where only one projector unit is operating at one time and the other unit is used as a backup. • If the projector is placed in a box or enclosure, the temperature of the air surrounding the projector must match the operating temperature listed in the specifications table during use. Also, make sure the projector’s intake and exhaust openings are not blocked. Ensure there is sufficient ventilation to prevent hot air from the exhaust openings being recirculated into the intake opening. 3 The lamp replacement cycle duration becomes shorter if the projector is operated repeatedly for short periods. • The lamp replacement cycle varies greatly depending on individual lamp characteristics and usage conditions. • The brightness of the lamp will gradually decrease with use. 4 Due to natural characteristics of lamps, screen brightness may fluctuate. This is not an indication of faulty lamp performance.