Panasonic values your privacy and your trust is important to us. We use cookies to enhance your website experience. By clicking “Accept all cookies”, you agree Panasonic can store cookies on your device and disclose information in accordance with our Privacy Policy. OK Learn More
PT-FX400EA
| General | Power supply | 100 - 240 V AC, 3.9 - 1.4 A, 50/60 Hz | |
|---|---|---|---|
| Power consumption | 330 W (0.3 W at 100 - 120 V AC, 0.4 W at 220 - 240 V AC when standby mode set to eco*1, 9 W when standby mode set to normal, 20 W when standby mode set to normal and audio monitor out.) | ||
| LCD panel | Panel size | 20.3 mm (0.8 inches) diagonal (4:3 aspect ratio) | |
| Display method | Transparent LCD panel (× 3, R/G/B) | ||
| Pixels | 786,432 (1,024 × 768) × 3, total of 2,359,296 pixels | ||
| Pixel configuration | Stripe | ||
| Lens | Manual 2× zoom (throw ratio: 1.48 - 2.96:1), manual focus F 1.7 - 2.6, f 24.0 - 47.2 mm | ||
| Lamp | 250 W UHM lamp (The lamp replacement cycle is 6,000 hours.*2) | ||
| Screen size (diagonal) | 0.84 - 7.62 m (33 - 300 inches), 4:3 aspect ratio | ||
| Brightness*sup3/sup | 4,000 lm (lamp mode: normal) | ||
| Center-to-corner uniformity ratio*sup3/sup | 80% | ||
| Contrast ratio*sup3/sup | 600:1 (full on/full off) | ||
| Resolution | 1,024 × 768 pixels (Input signals that exceed this resolution will be converted to 1,024 × 768 pixels.) | ||
| Scanning frequency | HDMI/DVI-I (digital) | fH: 27.0 kHz - 68.7 kHz; fV: 24.0 Hz - 85.0 Hz; dot clock: 25.2 MHz - 148.5 MHz | |
| DVI-I (analog)/RGB | fH: 15 .6 kHz - 91.1 kHz; fV: 24.0 Hz - 85.1 Hz; dot clock: 162 MHz or lower | ||
| YPsubB/subPsubR/sub (YCsubB/subCsubR/sub) | fH: 15.75 kHz; fV: 60 Hz [480i (525i)] fH: 31.50 kHz; fV: 60 Hz [480p (525p)] fH: 45.00 kHz; fV: 60 Hz [720 (750)/60p] fH: 33.75 kHz; fV: 60 Hz [1080 (1125)/60i] fH: 27.00 kHz; fV: 24 Hz [1080 (1125)/24p] fH: 67.50 kHz; fV: 60 Hz [1080 (1125)/60p] fH: 15.63 kHz; fV: 50 Hz [576i (625i)] fH: 31.25 kHz; fV: 50 Hz [576p (625p)] fH: 37.50 kHz; fV: 50 Hz [720 (750)/50p] fH: 28.13 kHz; fV: 50 Hz [1080 (1125)/50i] fH: 33.75 kHz; fV: 30 Hz [1080 (1125)/30p] fH: 56.25 kHz, fV: 50 Hz [1080 (1125)/50p] | ||
| Video/S-Video | fH: 15.75 kHz; fV: 60 Hz (NTSC/NTSC4.43/PAL-M/PAL60), fH: 15.63 kHz; fV: 50 Hz (PAL/PAL-N/SECAM) | ||
| Optical axis shift*sup5,/sup/sup | Vertical | ±50% from center of screen (manual) | |
| Horizontal | ±27% from center of screen (manual) | ||
| Keystone correction range | Vertical: ±30° | ||
| Installation | Ceiling/desk, front/rear | ||
| Built-in speaker | Output power: 5.0 W (monaural) | ||
| Terminals | HDMI IN | HDMI 19-pin × 1 (Deep Color, compatible with HDCP) 480p, 576p, 720/60p, 720/50p, 1080/60i, 1080/50i, 1080/24p, 1080/60p, 1080/50p, VGA (640 × 480) - WSXGA+ (1,680 × 1,050), compatible with non-interlaced signals only; dot clock: 25.2 - 146.25 MHz; Audio signal: linear PCM (sampling frequencies: 48 kHz, 44.1 kHz, 32 kHz) | |
| DVI-I IN | DVI-I 29-pin × 1 Digital: (DVI 1.0 compliant, compatible with HDCP, compatible with single link only) 480p, 576p, 720/60p, 720/50p, 1080/60i, 1080/50i, 1080/24p, 1080/60p, 1080/50p, VGA (640 × 480) - WSXGA+ (1,680 × 1,050), compatible with non-interlaced signals only; dot clock: 25.2 - 146.25 MHz; Analog: (RGB/YPBPR (YCBCR)) | ||
| COMPUTER (RGB) IN | D-sub HD 15-pin (female) × 1 (RGB/YPBPR × 1) | ||
| VIDEO IN | RCA pin × 1 (composite video) | ||
| S-VIDEO IN | Mini DIN 4-pin × 1 (S-Video) | ||
| AUDIO IN 1 | M3 × 1 (L, R × 1), 0.5 Vrms | ||
| AUDIO IN 2 | M3 × 1 (L, R × 1), 0.5 Vrms | ||
| AUDIO IN 3 | RCA pin × 2 (L, R × 1), 0.5 Vrms | ||
| AUDIO OUT | M3 × 1 (L, R × 1) (monitor out: 0 - 2.0 Vrms, variable) | ||
| SERIAL IN | D-sub 9-pin (female) × 1 for external control (RS-232C compliant) | ||
| LAN | RJ-45 × 1 (for network connection, 10Base-T/100Base-TX, compliant with PJLink™) | ||
| WIRELESS MODULE | Connector for optional wireless module ET-WM200 × 1 | ||
| Cabinet materials | Molded plastic (PC+ABS) | ||
| Dimensions (W × H × D) | 430 × 125.5*4 × 323 mm (16 - 15/16˝ × 4 - 15/16˝ *4 × 12-23/32˝ ) (Protruding parts not included) | ||
| Weight | Approximately 6.0 kg (13.2 lbs.) | ||
| Shipping dimensions (W x H x D) | 946 x 402 x 846 mm (38" x 15-13/16" x 33-5/16") | ||
| Shipping weight | 51 kg (112.4 lbs) | ||
| Operating environment | Operating temperature: 0°C - 40°C (32°F - 104°F)*5; operating humidity: 20% - 80% (no condensation) | ||
| Supplied accessories | Power cord, wireless remote control unit, batteries (AA type for North America, R6/LR6 type for Europe and Asia) x 2, software CD-ROM (Logo Transfer Software, Multi Projector Monitoring & Control Software Ver. 2.5, Wireless Manager ME 5.5) | ||
| NOTE | *1 When the standby mode is set to eco, network functions such as power on over the LAN will not operate. Also, only certain commands can be received for external control using the serial terminal. *2 This value is calculated by continuously turning the lamp on for 2 hours and off for 0.25 hours. The lamp replacement cycle will decrease if the lamp is turned on/off more frequently, or if it is left on for longer intervals. *3 Measurement, measuring conditions and method of notation all comply with ISO 21118 international standards. *4 With legs at shortest position. *5 The operating temperature range is 0°C to 35°C (32°F to 95°F) when used in High- Altitude mode (1,400 m to 2,700 m (4,593 ft to 8,858 ft)). NOTES ON USE 1 Do not install the projector in locations that are subject to excessive water, humidity, steam or oily smoke. Doing so may result in fire, malfunction or electric shock. 2 The projector uses a high-voltage mercury lamp that contains high internal pressure. This lamp may break, emitting a large sound, or fail to illuminate, due to impact or extended use. 3 The projector uses a high-wattage lamp that becomes very hot during operation. Please observe the following precautions: • Never place objects on top of the projector while it is in operation. • Make sure there is an unobstructed space of 500 mm (19-11/16 in) or more around the projector’s exhaust openings. • Do not stack projector units directly on top of one another for the purpose of multiple (stacked) projection. When stacking projector units, be sure to provide the amount of space indicated between them. These space requirements also apply to installation where only one projector unit is operating at one time and the other unit is used as a backup. • If the projector is placed in a box or enclosure, the temperature of the air surrounding the projector must be between 0°C (32°F) and 40°C (104°F). Also, make sure the projector’s intake and exhaust openings are not blocked. Take particular care to ensure that hot air from the exhaust openings is not sucked into the intake. 4 The lamp replacement cycle duration becomes shorter if the projector is operated repeatedly for short periods. • The length of time that it takes for the lamp to break or fail to illuminate varies greatly depending on individual lamp characteristics and usage conditions. • The brightness of the lamp will gradually decrease with use. 5 Due to natural characteristics of lamps, screen brightness may vary (flicker). This is not an indication of faulty lamp performance. | ||
© 2023 - Panasonic Life Solutions India Pvt. Ltd. All rights reserved
MRP wherever mentioned is inclusive of all taxes
Panasonic values your privacy and your trust is important to us. We use cookies to enhance your website experience. By clicking “Accept all cookies”, you agree Panasonic can store cookies on your device and disclose information in accordance with our Privacy Policy. OK Learn More