Specs - WV-CP500 Series Fixed Cameras

Panasonic values your privacy and your trust is important to us. We use cookies to enhance your website experience. By clicking “Accept all cookies”, you agree Panasonic can store cookies on your device and disclose information in accordance with our Privacy Policy. OK Learn More

AddedRemoved

See product page

Copy URL

WV-CP500 Series

TV System		Type	PAL
Camera	Image Sensor		1/3 inch interline transfer CCD
	Effective Pixels		976 (H) x 582 (V)
	Scanning Mode		2:1 interlace scan
	Scanning Area		0.48 (H) x 0.36 (V) cm
	Scanning Frequency	Horizontal	15.625 kHz
	Scanning Frequency	Vertical	50 Hz
	Scanning Line		625 lines
	Horizontal Resolution		650 TV lines typical at color mode, 700 TV lines at B/W mode
	Minimum Illumination* Estimated figure		Color: 0.3 lux (SENS UP: OFF), 0.01 lux* (SENS UP: 32x) at F1.4 B/W: 0.04 lux (SENS UP: OFF), 0.0015 lux* (SENS UP: 32x) at F1.4
	Signal-to-Noise Ratio		50 dB (AGC Off, Weight On)
	White Balance		ATW1 (2,700 ~ 6,000 K), ATW2 (2,000 ~ 6,000 K), or AWC (2,000 ~ 10,000 K)
	Light Control		ALC / ALC+ / ELC
	AGC		ON (HIGH / MID / LOW), or OFF
	Super Dynamic 5		ON / ON (i-VMD) / OFF (with BLC masking 8 x 6 areas)
	Dynamic Range		54 dB typical (Super Dynamic 5 ON)
	Electronic Shutter		OFF (1/50), 1/120, 1/250, 1/500, 1/1,000, 1/2,000, 1/4,000, 1/10,000 s
	Electronic Sensitivity UP		OFF / AUTO (2x, 4x, 6x, 10x, 16x, 32x) / FIX (2x, 4x, 6x, 10x, 16x, 32x)
	Digital Noise Reduction		Low / High
	Black and White Mode	Mode	AUTO1 / AUTO2 / ON / OFF with external control,
	Black and White Mode	Level	High / Low
	Digital Zoom		ON (up to 2x) / OFF
	Scene File		2 patterns
	i-VMD (intelligent-Video Motion Detection)		Video Motion Detection Object Detection (Removal and Left Behind) Scene Change Detection
	Privacy Zone		ON (Gray / Mosaic) or OFF
	Auto Image Stabilizer		ON / OFF
	Camera Title		Up to 16 characters
	Lens Mount		CS-mount
	Lens ALC Drive		DC
	Back Focus Adjustment		ABF (AUTO / PRESET / FIX), MANUAL-ADJ
	Synchronization		Internal (INT), Multiplexed Vertical Drive (VD2), Line-Lock (LL)
Input / Output		Video Output	1.0 V [P-P] / PAL composite 75 Ω / BNC Connector Multiplexed VD2 and control data capable
Input / Output		External I/O Terminals	ALARM IN: 1 (OFF / ALARM / VMD PERMIT / BW / SCENE2) ALARM OUT: 1 (OFF / ALARM / BW)
General	Setup Method		OSD setup menu
	Language		English, Russian (For setup menu and camera title), German, French, Italian, Spanish (For setup menu) Japanese (Only for camera title. Setup menu is in English.)
	Safety/EMC Standard		CE (EN60065, EN55022 ClassB, EN55024), GOST (GOST R 51558)
	Power Source and Power Consumption	WV-CP500	220 ~ 240 V AC 50 Hz, 3.7 W
	Power Source and Power Consumption	WV-CP504	24 V AC 50 Hz, 3.6 W 12 V DC, 310 mA
	Ambient Operating Temperature		–10 °C ~ +50 °C (14 °F ~ 122 °F)
	Ambient Operating Humidity		90 % or less (without condensation)
	Dimensions	WV-CP500	7.5 cm (W) x 6.5 cm (H) x 13.25 cm (D)
	Dimensions	WV-CP504	7.2 cm (W) x 6.5 cm (H) x 10.35 cm (D)
	Weight (approx.)	WV-CP500	430 g (0.95 lbs.) (without power cord)
	Weight (approx.)	WV-CP504	350 g (0.77 lbs.)
Note			Weights and dimensions are approximate. Specifications are subject to change without notice.