BL-VT164

BL-VT164

Pan-tilt Wireless Network Camera

• 720p HD images up to 30 fps
• 1.0 Megapixel high sensitivity CMOS Sensor
• Full frame (Up to 30 fps) transmission at 1,280 x 720 image size
• H.264 and JPEG dual stream output
• High sensitivity with Day & Night (Electrical) function: 0.9 lx (Color),0.6 lx (B/W) at F2.8
• 1.5x extra zoom under VGA resolution
• Remote Pan and Tilt control
• Smart phone Monitoring

BL-VT164

Close

Features

• 720p HD images up to 30 fps
• 1.0 Megapixel high sensitivity CMOS Sensor
• Multiple H.264 (High profile) streams and JPEG streams ensure simultaneous real time monitoring and high resolution recording by “UniPhier®?, Panasonic’s proprietary System LSI platform.
• Full frame (Up to 30 fps) transmission at 1,280 x 720 image size
• High sensitivity with Day & Night (Electrical) function: 0.9 lx (Color), 0.6 lx (B/W) at F2.8
• Digital Noise Reduction: 3D-DNR ensures noise reduction in various conditions.
• Progressive scan ensures clear images with less motion blur and no tearing even when the subject is moving.
• Electronic sensitivity enhancement: Auto (Up to 16x) / OFF
• Selectable light control modes: Indoor scene (50 Hz) / Indoor scene (60 Hz) / ELC (maximum exposure time) Indoor scene (50 Hz/60Hz): Flicker caused by fluorescent lightning will be automatically compensated.
ELC (maximum exposure time): The lightning control will be automatically performed by adjusting shutter speed in the range of ELC.
• 1.5x extra zoom under VGA resolution
• 8x digital zoom controlled by browser
• VMD (Video Motion Detection) with 4 programmable detection areas, 15 steps sensitivity level and 10 steps detection size
• Face detection function detects the position of human face and the information is sent by XML or video stream.
• Privacy Zone can mask up to 2 private areas, such as house windows and entrances/exits.
• Camera title display: Up to 20 alphanumeric characters on the browser
• Alarm sources including VMD and Panasonic alarm command can trigger actions such as FTP image transfer, E-mail notification, Indication on browser, and Panasonic alarm protocol output.

• JPEG Image compression ratio can be changed by alarm so that higher quality image can be provided.
• Prioritized stream control: One of the video streams can be prioritized when multiple recorders or client PCs are accessing the camera so that the recorder or the client PC can maintain the frame rate.
• H.264 max. bit rate/client and Total bit rate control allows flexible network traffic management. Frame rate priority mode controls bit rate and compression ratio to provide the specified frame rate.
• Internet mode: H.264 images can be transmitted over HTTP protocol.
• Multi-language: English / Italian / French / German / Spanish / Russian / Chinese / Japanese
• IPv4/IPv6 protocol supported
• Supports SSL, DDNS (viewnetcam, RFC2136)
• Still images (JPEG) can be viewed on mobile phones via Internet.
• Onvif compliant model
• Low profile design for discrete installation
• Pan/tilt and Preset Map Shot function realizes wide range monitoring..(Horizontal angle:139° Vertical angle 76°)
• Easy installation: Easy to adjust directions.
• Interactive communication with audio: By using the audio output connector and the microphone in connector, receiving audio from the cameras on a PC and transmitting audio from the PC to the cameras is available.
• Smartphone monitoring : Direct camera control from smartphone
• Built-in Body Heat Sensor (Pyroelectric infrared sensor)
• PC software recording (BB-HNP17: Network Camera Recorder with Viewer Software)

Support

Get Support

for BL-VT164

Visit the support page for this product