WV-NW484S

WV-NF284

WV-NW484S

Network camera designed for heavy duty use featuring Super Dynamic III

• IP66 rated water and dust resistant
• High sensitivity: 0.6 lux (Color) 0.08 lux (B/W) at F1.4 (Wide) / 0.019 lux (Color) 0.003 lux (B/W) at F1.4 (Wide) with Sens Up 32x

WV-NW484S

Close

Features

• MPEG-4/JPEG digital signal output at VGA image size with up to 30 ips.
• MPEG-4 and JPEG dual stream output for simultaneous live monitoring and high resolution recording.
• Progressive output provides clear images even when the subject is moving.
• Super Dynamic III technology delivers 128x wider dynamic range compared to conventional cameras.
• High sensitivity with Day-Night function: 0.6 lux (Color), 0.08 lux (B/W) with clear dome cover.
• Adaptive Digital Noise Reduction: Selectable use of either 2D-DNR or 3D DNR ensures noise reduction in various conditions.
• Up to 32x automatic electronic sensitivity enhancement.
• Electronic shutter for anti flicker.
• 0.38 ~ 0.80 cm, 2x varifocal lens built-in.
• Auto Back Focus (ABF) ensures easy installation and stable focus in both color and B/W modes.
• Scene Change Detection alarms when lens is covered, spray painted, removed or defocused.
• Video Motion Detector with 4 programmable detection areas and 3 sensitivity levels.
• Auto image stabilizer for applications where vibration or wind is a concern.
• Flexible digital zoom and pan/tilt operation: Up to 3x variable digital zoom and pan/tilt can be set in the setup menu (effective both for analog and network video). 2x or 4x digital zoom and pan/tilt can be controlled by the browser GUI for network video.

• Camera title displays: Up to 16 (OSD) and 20 (on browser) alphanumeric characters.
• SD Memory card slot for alarm recording and backup upon network failure.
• Alarm sources include Terminal input, VMD and Panasonic alarm command, and can trigger actions including SD memory recording/ FTP image transfer, E-mail notification, Alarm indication, Terminal output and Panasonic protocol output.
• Built-in network interface (10Base-T / 100Base-TX).
• Power over Ethernet (PoE) IEEE 802.3af.
• Multiscreen: Images from 8 cameras can be displayed in two separate Quad screens (JPEG only). 20 characters camera title is available for each camera.
• FTP client function enables periodic image data transfer or transfer upon alarm.
• Alarm e-mail notification
• Max bit rate/client for MPEG-4 (64 / 128 / 256 / 512 / 1,024 / 1,536 / 2,048 / 3,072 / 4,096 kbps) combined with Total bit rate control (64 / 128 / 256 / 512 / 1,024 / 2,048 / 4,096 kbps / Unlimited) allowing flexible network management.
• Supported Protocol: TCP/IP, UDP/IP, HTTP, FTP, SMTP, DHCP, DNS, DDNS, NTP, RTP and SNMP.
• Multi-language GUI and setup menu: English, French, Italian, Spanish, German, Russian (PAL), English, French (NTSC), (Installation required except for English).
• IP66 rated water and dust resistant. IEC60529 measuring standard compatible.
• Dehumidification device for use in various weather conditions.
• Vandal resistant mechanism for high reliability
• Three-way hinge (horizontal, vertical and swivel rotation) for easy installation
• Optional heater maintains operating temperature –30 °C ~ +50 °C (–22 °F ~ 122 °F) when operated by 24 V AC or PoE.