Panasonic ZigBee - PAN4570

The PAN4570 module is a short range, low power, 2,4GHz ISM band transceiver using the EmberTM EM250 single chip solution for ZigBeeTM, a IEEE802.15.4- compliant transceiver with a 16- bit XAP2b microprocessor. With added onboard reference oscillators and optimized RF frontend circuitry PAN4570 provides the complete hardware needed for a ZigBeeTM solution. PAN4570 comprises EmberZNet, the EmberTM ZigBee–compliant software stack, which is a ZigBeeTM profile-ready platform compliant solution. A reliable Application Programming Interface based on the ZigBeeTM specification is provided for the ease of the creation of application profiles. Additional regulator and 32kHz crystal can be mounted in addition on cutomer demand.

Specifications:

  • 3 antenna options: Plug, single port 50W or ceramic antenna
  • 16 selectable Channels with 250 kbps in the 2.4 GHz band
  • 3 different power modes for increased battery life
  • High sensitivity of -98 dBm typ. at 1% Packet Error Rate
  • +3dBm output power (+5dBm in boost mode)
  • Low supply voltage (2.1 V to 3.6 V, 3.0 V typ.)
  • Small size (20.0mm x 26.5mm x 3.0mm)
  • Onboard low power regulator
  • Operating temperature range -40°C to +85°C
  • 128k Flash and 5k SRAM memory
  • Link quality and clear channel assessment capability
  • All of the 17 GPIO of EM250 are available at the module pads, which are multiplexed to GPIO, UART, SPI, I2C or up to four analog inputs to an ADC and two timer waveform outputs

PAN4570 Specification
PAN4570 Manual Application Board