|
 |
PAN1555
Integrating Bluetooth communication in to your final product has never been easier. The new PAN1555 Bluetooth module series include on-board microcontrollers that optionally include multiple BT profiles, including SPP, HSP, HFP and HDP.
The new PAN1555 Bluetooth module series is based upon Cambridge Silicon Radio's BlueCore6-ROM (BC06). The PAN1555 includes an integrated ceramic antenna. These modules are compatible with the latest version of the Bluetooth Specification - 2.0 + Enhanced Data Rate (EDR) up to 3Mbits/s. The product delivers greater simplicity of use, lower power consumption and enhanced security. The PAN1555 Bluetooth module series is 100% footprint compatible with its predecessor the PAN1550 and is backward compatible with older Bluetooth devices (back to version 1.1).
Datasheet Specification
Product Performance:
- Fully Qualified Bluetooth v2.1 +EDR
- Dimensions: 22.75mm x 13.50mm x 2.85mm
- Full-Speed Bluetooth Operation With Full Piconet And Scatternet Support
- Operating Temperature Range: -40ºC to +85ºC
- Low-Voltage 2.0V To 3.6V Operation
- Integrated 1.8V And 1.5V Regulators
- Class 2 And Class 3 Support
- RF Transmit Power With Level Control From On-Chip 6-bit DAC Over A Dynamic Range >30dB
- RoHS Compliant
- SDIO And CSPI
- Synchronous Serial Interface Up To 4 Mbaud For System Debugging
- UART Interface With Programmable Baud Rate Up To 4 Mbaud With Optional Bypass Mode
- Bi-Directional Serial Programmable Audio Interface, Supporting PCM And I2S Formats
Applications:
Radio Features:
- High Sensitivity Design (-86 dBm Typ.)
- Full 8 to 128 bit encryption
- Power Control and RSSI, Hold, Park, ans Sniffmode
- Support for very low power modes: Sleep and Deep Sleep
Interfaces:
- UART (Programmable baud Rate), USB, I2C, SPI and ADC
- 18 GPIOs for individual usage for your embedded software
- All Bluetooth data rate up to 2178kbps Asymmetric
- PCM Interface Master/Slave supporting 13 or 16 bit linear, 8 bit u-law or A-law codecs and CVSD Transcoders on up to 3 SCO channels
Specifications:
|
|
|
| Receiver Sensitivity, (BER=10-3) |
-86 dBm |
with DHS package |
| Output Power |
+4 dBm typ. |
|
| Power Supply |
2.7 - 3.6 V |
Single Operation Voltage |
| Ultra Low Power Mode |
< 100 uA |
T=25°C |
| ACL (connected DH5) |
50.5 mA to 49.5 mA |
max power to min power * |
| ACL (connected DH1) |
48.0 mA to 46.0 mA |
max power to min power * |
| Operating Temperature Range |
-40°C to + 85°C |
|
* Figure indicates to the shortest poll period and to the slave mode.
Pin Layout:

Part Numbers:
| ENW89815A3KF |
PAN1555, CSR, BC06, SPP Profile, Integrated Antenna |
| EVAL_PAN1555 |
Evaluation Kit for the PAN1555 |
Copyright © 2009 Panasonic Corporation of North America. All Rights Reserved.

|