 |
 |
 |
 |
|
|||
| PAN2350 PAN2355 PAN2450 | |||
|
|||
PAN2350
The PAN2350 is a low power UHF narrowband transceiver, specially designed for both ISM and SRD band frequencies. It is easily programmed for operation at a number of other frequencies. This small module offers a low cost, fully integrated solution for many wireless applications. The PAN2350 is made for applications where a narrow band bidirectional data transfer function is needed but can also be used in wide band bidirectional applications.
Product Performance:
- Maximum Data-rate Up To 153.6 kBaud (NRZ Mode)
- Low Power Consumption- Frequency Range 804 - 940 MHz or 402 - 470 MHz
- High Sensitivity (Up To 121 dBm For A 12.5 kHz Channel)
- Programmable Output Power Up To 10 dBm
- Low Supply Voltage (2.3 V to 3.6 V)
- Small Size: 14.8mm x 20.3mm x 4.2mm
- Operating Temperature Range: -40°C to +85°C
- Digital RSSI and Carrier Sense Indicator
- Suitable For Frequency Hopping Systems
- Single Port Antenna Connection
- Complies With EN 300 220 And FCC CFR47 Part 15
Applications:
- Wireless Alarm And Security Systems
- RKE - Two-Way Remote Keyless Entry
- Home Automation Systems
- Automated Meter Reading
- Low Power Telemetry
- Toys
Specifications:
| Receiver Sensitivity (BER=10-3) 433 MHz 868 MHz |
-117 dBm -116dBm |
12.5 kHz channel width, FSK@2kHz, 2.4kBaud, Manchester coded |
| Output Power 433 MHz 868 MHz |
-20 to +10 dBm -20 to +5 dBm |
Delivered to 50Ω load. Output power is programmable. |
| RSSI Dynamic Range | 63 dBm range | Digital Output |
| PLL Lock Time (Rx/Tx turn time) 12.5 kHz channel width, 433 MHz 25 kHz channel width, 868 MHz |
1.3 ms 1.1 ms |
Up to 1MHz frequency step to within +/- 1kHz |
| PLL turn-on time from power down mode with crystal oscillator running 12.5 kHz channel width, 433 MHz 25 kHz channel width, 868 MHz |
4.8 ms 2.5 ms |
Time from writing to registers to PLL lock |
| Power Down Mode | 0.2 uA typ. | Oscillator Core Off |
| Current Consumption (Receive Mode 433 / 868 MHz) |
16.9 / 17.6 mA typ. | 25 kHz channel width. Lower current can be achieved at other settings |
| Current Consumption (Transmit Mode 433 / 868 MHz) P=3mW (5dBm) |
16.8 / 33.0 mA typ. | Delivered to 50Ω load. Output power is programmable. |
Notes:
All parameters belong to VCC = 3.0V, Tamb = 25°C
Chipcon's CC1020 is used in this module.
Pin Layout:
Part Numbers:
| ENW59604NC1 | PAN2350, 868 MHz, 4.8KBPS, Tx 5 dBm |
| ENW59604NC2 | PAN2350, 868 MHz, 153.6KBPS, Tx 5 dBm |
| ENW59604NC3 | PAN2350, 433 MHz, 4.8KBPS, Tx 10 dBm |
| ENW59604NC4 | PAN2350, 434 MHz, 156.8KBPS, Tx 5 dBm |
| EVAL_PAN2350 | Evaluation Kit for the PAN2350 |
Copyright © 2009 Panasonic Corporation of North America. All Rights Reserved.