PAN2355 ISM Radio Frequency Module From Panasonic Electronic Components

	Technical Information
		Product Overview
		Video FAQs
		Application Help

	Getting Started
		Evaluation Kits
		Samples
		Reference Designs
		Application Overview

	Firmware
		Synapse
		E-Senza

	Downloads
		Catalogs
		Datasheets
		Press Releases

	Contact Us
		How to Buy
		Application Help
		Literature Request
		RF Module Home



PAN2350 \| PAN2355 \| PAN2450

PAN2355

This extremely compact and multi-functional module is intended for the ISM frequency bands between 300 and 1000 MHz. This wireless transceiver can be linked to a wide range of devices including home appliances and keyless entry through SPI. Programming the vast functionalities is done via SPI. The PAN2355 is made for all applications where a wide band bidirectional data transfer with high speed is needed. It has a small size with a 8 x 8.2mm footprint and very low power consumption and is ideal for battery driven applications.

Datasheet
PAN2355 Specification
Panasonic ISM Overview
PAN2355 Development Kit Specs

Product Performance:

Programmable Data-Rate Up To 500 kBaud (NRZ Mode)
Very Low Current Consumption
Frequency Range 300 - 1000 MHz
High Sensitivity: Typical -100 dBm at 2.4 kBaud, Manchester
Programmable Output Power: -52 dBm to +10 dBm
Low Supply Voltage: 2.1V to 3.6V
Operating Temperature Range: -40°C to +85°C
Small Size: 8.0mm x 8.2mm x 1.9mm, Including Shielding (Only 65.6 mm²)
Digital RSSI Output
Single Port 50Ω Antenna Connection
Programmable Frequency in 400 Hz Steps Makes Crystal Temperature Drift Compensation Possible

Applications:

Wireless Alarm And Security Systems
RKE - Two-Way Remote Keyless Entry
Home Automation Systems
Automated Meter Reading
Low Power Telemetry
Toys

Specifications:

Parameter	Value	Condition / Notes
Receiver Sensitivity at 2.4 kbps, 2-FSK at 250 kbps, 2-FSK	-100 dBm -85dBm
Output Power	-52 to +10 dBm	Delivered to 50Ω load. Output power is programmable.
RSSI Dynamic Range	-136 to -8 dBm
PLL Lock Time (Rx/Tx turn time)	10 us	For 1x IF Frequency step
PLL turn-on time, crystal oscillator on in power down mode	80 us	Crystal oscillator running
Power Down Mode	900 nA typ.	Oscillator Core Off
Current Consumption (Receive Mode @ 2.4 kbps)	14.2 mA typ.	Current is programmable and can be increased for improved sensitivity
Current Consumption (Transmit Mode) P=3mW (5dBm)	19.7 mA typ.	Delivered to 50Ω load.

Notes:
All parameters are valid for VDD = 3.0V, Tamb = 25°C and 868MHz
Maximum output power is 10dBm but currently only 6 dBm is allowed to pass EN300220 requirements.

Pin Layout:

Part Numbers:

ENW59611N3A	PAN2355, 868~915MHZ, 156.8KBPS, Tx 10 dBm
EVAL_PAN2355	Evaluation Kit for the PAN2355