 |
 |
 |
 |
|
|||
| PAN2350 PAN2355 PAN2450 | |||
|
|||
PAN2450
The PAN2450 module is a low power UHF transceiver, with a completely integrated (autonomous) micro-controller and a highly efficient power amplifier. It is designed for ISM and SRD band frequencies. It can be easily programmed for operations at other frequencies. The modem complies with EN 300-220 and FCC CFR47 part 15 and offers a low cost solution for many ISM-applications. It?s an optimal solution for all applications where a narrow band and wide band bidirectional data transfer function is required. It can be customized for various power levels, channel spacing and frequency needs.
Product Performance:
- Maximum Data-rate:
Up to 153.6 kBaud (NRZ Mode, Wide Band Applications)
Up to 19.2k Baud (NRZ Mode, Narrow Band Applications) - Low Power Consumption
- Frequency Range 868 - 915 MHz (std)
- High Sensitivity (Up To -114 dBm for a 12.5 kHz Channel)
- Programmable Output Power From 0 To 14 dBm
- Low Supply Voltage: 2.3 V to 3.6 V Typ. 3.0 V
- Small Size: 20.4mm x 30.4mm x 3.7mm
- Operating Temperature Range: -10°C to +55°C
- Digital RSSI And Carrier Sense Indicator
- Suitable For Frequency Hopping Systems
- Single Port Antenna Connection
- Complies With ETSI EN 300 220 And FCC CFR47 Part 15 And ARIB STD-T67
Applications:
- Wireless Alarm And Security Systems
- RKE - Two-Way Remote Keyless Entry
- Home Automation Systems
- Automated Meter Reading
- Low Power Telemetry
- Toys
Specifications:
| Receiver Sensitivity, (BER=10-3) 868 MHz |
-114 dBm |
12.5 kHz channel width, FSK@2kHz, 2.4 kBaud, Manchester coded |
| Output Power 868 MHz |
-0 to +14 dBm | Delivered to 50Ω load. Output power is programmable. |
| RSSI Dynamic Range | 63 dBm range | Digital Output |
| PLL Lock Time (Rx/Tx turn time) 25 kHz channel width, 868 MHz |
1.1 ms | Up to 1 MHz frequency step to within +/- 1kHz |
| PLL turn-on time, From power down mode with crystal osciallator running, 25 KHz channel width, 868 MHz |
2.5 ms | Time from writing to registers to PLL lock |
| Power Down Mode | 802 uA typ. | Oscillator core off, depends on the power down mode from the uC MSP430. Can be reduced with a new layout. |
| Current Consumption (Receive Mode 868 MHz) |
18 mA typ. | 25 kHz channel width |
| Current Consumption (Transmit Mode) 868 MHz P=25mW (14dBm) |
50 mA typ. | Delivered to 50Ω load. Output power is programmable. |
Notes:
All parameters belong to Vcc = 3V and Tamb = 25°C.
Texas Instruments µC MSP430F1232, Chipcon's CC1020 and a small Power Amplifier are used in this module.
Pin Layout:
Part Numbers:
| ENW59602ND1 | PAN2450, 868~915MHZ, 4.8KBPS, Tx 14dBm |
| EVAL_PAN2450 | Evaluation Kit for the PAN2450 |
Copyright © 2009 Panasonic Corporation of North America. All Rights Reserved.