|
 |
PAN4555
The PAN4555 module is a short range, low power, 2.4 GHz ISM band transceiver. It includes a complete 802.15.4 physical layer (PHY) modem. It is designed for the IEEE 802.15.4 wireless standard and microcontroller (MCU). The module also has a reference oscillator which provides a cost effective solution for short-range data links and networks.
Several firmware options are available, modules can be configured from simple point-to-point proprietary devices to complex mesh networks. Optional Synapse SNAP firmware provides a highly flexible, industry leading solution for mesh networking with a complete network development environment.
This module complies with EN300328, FCC CFR Part 15 and ARIB STD-T66 standards.
Datasheet
Specification
Programmers Interface Module for the AT Command Set
SNAP Reference Manual
PAN4555 Manual Application Board
DataSheet Freescale MC1321x
Product Performance:
- Very Small Size: 12.2mm X 16.4mm X 2.2mm (200mm2)
- 2 Antenna Options: Single Port 50Ω Or Ceramic Antenna
- 16 Selectable Channels With 250 Kbps In The 2.4 GHz Band
- Low Power Modes For Increased Battery Life
- High Sensitivity Of -92 dBm Typical At 1% Packet Error Rate
- 0 dBm Typical Output Power Programmable Over A 30 dB Range
- Low Supply Voltage (2.0 V To 3.4 V, 2.7 V Typical)
- Operating Temperature Range: -40°C To +85°C
- Link Quality And Clear Channel Assessment Capability
- 60k Flash And 4k RAM Memory
- 4 Channel A/d Converter With 10 Bit Adc For Fast And Easy Conversion From Analog Inputs (Temperature, Pressure And Fluid Levels) To Digital Values.
- 3 Channel 16 Bit Timer/Pulse Width Modulation (Tpm) Outputs
- BDM Port For Direct Download Programming
- In Total 20 Digital I/O Lines With Programmable Pull-ups And Few With High-current Driver
- FCC, IC, & ETSI Approved
Applications:
Specifications:
|
|
|
| Receiver Sensitivity |
-92 dBm typical |
For 1% packet error rate |
| Output Power |
0 dBm |
Maximum |
| Power Supply |
2.0 V to 3.4 V |
Single supply, 2.7 V typical |
| Power Control Range |
30 dB |
|
| Maximum Data Rate |
250 kbps |
Over the air |
Current Consumption Receive Mode Transmit Mode Idle Mode Doze Mode Hibernate Mode Off Mode |
37 mA typ. 30 mA typ. 500 uA typ. 35 uA typ. 1 uA typ. <1 uA typ. |
Output power nominal value
No CLKO |
| Operating Temperature Range |
-40°C to +85°C |
|
Pin Layout:

Part Numbers:
| ENWC9A08A3EF |
Ceramic Antenna |
| ENWC9A09N4EF |
RF Out On SMD Pads |
| ENWC9A08A2EF |
Ceramic Antenna, AT Command Set, coordinator |
| ENWC9A09C2EF |
RF Out on SMD Pads, AT Command Set, coordinator |
| ENWC9A08A2EF |
Ceramic Antenna, AT Command Set, Node |
| ENWC9A09C2EF |
RF Out on SMD Pads AT Command Set |
| ENWC9A08A4EF |
Ceramic Antenna, SNAP |
| ENWC9A09C4EF |
RF Out on SMD Pads, SNAP |
| EVAL_PAN4555 |
Evaluation Kit for the PAN4555 |
Copyright © 2009 Panasonic Corporation of North America. All Rights Reserved.

|