 |
 |
 |
 |
|
|||
| PAN4555 PAN4555ETU PAN4561 (New) PAN4566 (New) PAN4570 | |||
|
|||
PAN4566
The PAN4566 is the latest addition to Panasonic's family of SNAP® modules. This third generation platform combines a 32 bit ARM7 core micro-controller with a 2.4GHz transceiver. The PAN4566 has both low noise and power amplifiers for long range applications. To maximize efficiency, Tx power is programmable over a 30dB range. With a maximum output power of 20dB and a receive sensitivity of -112dB, this module has a link margin of 132dB, giving it the best range in its class.
Multiple antenna options are available including, ceramic antenna, SMT pad output, and UFL connector. This module will comply to EN300328, FCC CFR Part 15 and ARIB STD-T66. FCC and IC certifications are pending.
Product Performance:
- Small Size: 35mm X 15mm X 3.5mm
- 128k Flash, 80k ROM And 96k RAM Memory
- Powerful 32-bit AR7TDMI-S Core
- 2 Antenna Options: Single Port 50Ω Or Ceramic Antenna
- 16 Selectable Channels With 250/2000 Kbps In 2.4 Ghz Band
- Low Power Modes For Increased Battery Life
- High Sensitivity: -112 dBm Typical At 1% Packet Error Rate
- 20 Dbm Typical Output Power Programmable Over A 30 dB Range
- Low Supply Voltage (2.7v To 3.3v, 3.0v Typ. - 2.0 To 3.6v Without PA/lNA) Optional: On-board Buck-converter
- Operating Temperature Range: -40°C To +85°C
- Link Quality And Clear Channel Assessment Capability
- Two Full UARTs With Flow Control, SPI And I2C
- 4 Channel A/D Converter With 12 Bit For Fast And Easy Conversion From Analog Inputs
- 4 Channel 16 Bit Timer/pulse Width Modulation Outputs
- JTAG Port For Debugging
- Flash Memory Access Over UART/SPI
- 40 Digital I/O Lines With Programmable Pull-Ups, Partially With High-Current Drivers
Applications:
- Remote Control And Wire Replacement In Industrial Systems Such As Wireless Sensor Networks
- Factory Automation / Motor Control
- Home Automation
- Lighting Control
- RFID Tagging
- Inventory Management
- Automated Meter Reading
- Monitoring (Environmental, Patient or Fitness)
Specifications:
| Receiver Sensitivity | -112 dBm typical | For 1% packet error rate |
| Output Power | 20 dBm | Maximum |
| Power Supply | 2.7 V to 3.3 V | Single supply, 3.0 V typical |
| Power Control Range | 30 dB | |
| Maximum Data Rate | 250 kbps | Over the air; Proprietary 2 Mbps Optional |
| Current Consumption Receive Mode Transmit Mode Idle Mode Doze Mode Hibernate Mode Off Mode |
33 mA typ. 189 mA typ. 770 uA typ. 74 uA typ. 19 uA typ. 2 uA |
Output power nominal value |
| Operating Temperature Range | -40°C to +85°C |
Notes:
All parameters are valid for VDD = 3.0V and Tamb = 25°C.
Pin Layout:
Part Numbers:
| ENWC9A24A3EF | PAN4566, 32 bit, LNA, PA, With Ceramic Antenna |
| ENWC9A24N4EF | PAN4566, 32 bit, LNA, PA, With RF Out On SMD Pads |
| ENWC9A24N2EF | PAN4566, 32 bit, LNA, PA, With U.FL Antenna Connector |
| EVAL_PAN4566 | Evaluation kit for the PAN4566 |
Copyright © 2009 Panasonic Corporation of North America. All Rights Reserved.