Make your product Powered by Panasonic


FCC Approved
Introducing the new PAN1325 Bluetooth RF module with embedded antenna. The PAN1325 provides easily integrated Bluetooth connectivity into new and current designs by removing RF design and certification barriers from the application. As the newest addition to Panasonic's Host Controlled Interface (HCI) Bluetooth RF Module product line, the PAN1325 has all the features of the proven PAN1315, with the added benefit of an onboard antenna.

Both the PAN1315 and the PAN1325 bring Texas Instrument's seventh generation Bluetooth core integrated circuit, the CC2560, to an easy-to-use module format with FCC certification. All of Panasonic's Bluetooth RF Modules feature unique, tiny footprint technology and are designed to accommodate PCBs with pad pitch of 1.3mm with as little as two layers for easy implementation and manufacturing.

Panasonic Bluetooth RF Modules make connectivity between mobile devices such as cellular phones and small button cell battery powered devices like fitness sensors, watches, healthcare, entertainment and mobile accessories easily implemented, creating a seamless data chain from sensors to the web.

PAN1325 Full Specification

PAN1325 Not Recommended For New Design

  • Consumer Health Devices
    • Heart Rate Monitor
    • Blood Pressure Sensor
    • Blood Glucose Meter
    • Thermometer
    • Fitness Sensors
  • Assisted Living
    • Flood Alarm
    • Heating Control
    • Automatic Key Control
  • Industrial Sensors
  • Toys
  • Entertainment Devices
  • Mobile Accessories
  • All Bluetooth Wireless Applications
Product Performance
  • Best-in-class Bluetooth RF performance (Tx power, Rx sensitivity, blocking)
  • Fully Qualified Bluetooth v2.1 EDR
  • Dimensions PAN1325: 9mm x 9.5mm x 1.8mm (width x length x height)
  • Dimensions PAN1315: 6.5mm x 9mm x 1.7mm (width x length x height)
  • Certifications: Bluetooth, CE, FCC (ETSI & IC pending)
  • Operating Temperature Range: -20°C to +70°C (Optional -40°C to +85°C)
  • Supply Voltage Range: 1.7 - 4.8V
  • Profiles: SPP, HDP, A2DP
  • Based upon TI's CC2560
  • Integrates with TI's ultra low-power MSP430 microprocessor
  • Very fast algorithm for both ACL and eSCO
  • Supports Extended Range Tx power with 10dBm typical output (10.5dBm for PAN1315)
  • Low power scan method for page and inquiry scans at 1/3rd normal power
The PAN1315/PAN1325 Host Controlled Interface supports several transport layers with the following features:
  • UART Rates of up to 4Mbps
  • Three and Four Wire UART Transport

Part Numbers:
Part Number Description
ENW-89818A2JF PAN1325, CC2560 HCI module, antenna
Parameter Value Condition / Notes
Receiver Sensitivity (BER=10-3) -93 dBm GFSK, Typical, Dirty TX On
Output Power 10 dBm VDD_In = VBAT
Power Supply 1.7 - 4.8 V Battery or DC/DC
Ultra Low Power Scan 135 uA 1.28s Interval
GFSK DH1\DH5 33 mA Full Throughput
Operating Temperature Range -20°C to + 70°C -40°C to + 85°C Optional
Block Diagram:
pan1325 block diagram