PAN1455

Make your product Powered by Panasonic

Overview

FCC Approved
Integrating Bluetooth communication in to your final product has never been easier. The new PAN1455 Bluetooth module series include on-board microcontrollers that optionally include multiple BT profiles, including SPP, HSP, HFP and HDP.

The new PAN1455 Bluetooth module series is based upon Cambridge Silicon Radio's BlueCore6-ROM (BC06). The PAN1455 is excellent for projects requiring an external antenna. These modules are compatible with version 2.1 of the Bluetooth Specification + Enhanced Data Rate (EDR) up to 3Mbits/s. The product delivers greater simplicity of use, lower power consumption and enhanced security. The PAN1455 Bluetooth module series is 100% footprint compatible with its predecessor the PAN1450 and backward compatible with older Bluetooth devices (back to version 1.1).

Applications
  • Printers & Printer Adapters
  • Access Points
  • Wireless Sensors
  • Industrial Applications
  • Cable Replacement
  • Medical Applications
  • Personal Digital Assistants (PDAs)
  • Personal Navigation Devices
  • Automotive Applications
Product Performance:
  • Fully Qualified Bluetooth v2.1 +EDR
  • Dimensions: 18.75mm x 13.50mm x 2.85mm
  • Full-Speed Bluetooth Operation With Full Piconet And Scatternet Support
  • Operating Temperature Range: -40°C to +85°C
  • Low-Voltage 2.7V To 3.6V Operation
  • Integrated 1.8V And 1.5V Regulators
  • Class 2 And Class 3 Support
  • RF Transmit Power With Level Control From On-Chip 6-bit DAC Over A Dynamic Range >30dB
  • RoHS Compliant
  • SDIO And CSPI
  • Synchronous Serial Interface Up To 4 Mbaud For System Debugging
  • UART Interface With Programmable Baud Rate Up To 4 Mbaud With Optional Bypass Mode
  • Bi-Directional Serial Programmable Audio Interface, Supporting PCM And I2S Formats
Radio Features:
  • High Sensitivity Design (-86 dBm Typ.)
  • Full 8 to 128 bit encryption
  • Power Control and RSSI, Hold, Park, ans Sniffmode
  • Support for very low power modes: Sleep and Deep Sleep
Interfaces:
  • UART (Programmable baud Rate), USB, I2C, SPI and ADC
  • 18 GPIOs for individual usage for your embedded software
  • All Bluetooth data rate up to 2178kbps Asymmetric
  • PCM Interface Master/Slave supporting 13 or 16 bit linear, 8 bit u-law or A-law codecs and CVSD Transcoders on up to 3 SCO channels

Specifications:
Parameter Value Condition / Notes
Receiver Sensitivity
  (BER=10-3)
-86 dBm with DHS package
Output Power
+4 dBm typ.  
Power Supply 2.7 - 3.6 V Single Operation Voltage
Ultra Low Power Mode < 100 uA T=25°C
ACL (connected DH5) 50.5 mA to 49.5 mA max power to min power *
ACL (connected DH1) 48.0 mA to 46.0 mA max power to min power *
Operating Temperature Range -40°C to + 85°C  

* Figure indicates to the shortest poll period and to the slave mode.


Pin Layout:
Part Numbers:
ENW89815C3KF PAN1455, CSR, BC06, SPP Profile
EVAL_PAN1455 Evaluation Kit for the PAN1455