PAN1326/1316

Make your product Powered by Panasonic

Overview




Introducing Panasonic's latest breakthrough in wireless networking, the NEW PAN1326/1316 Series RF Modules featuring both Bluetooth Low Energy and Bluetooth connectivity. This powerful new technology combination creates a low cost, ultra-low power wireless networking solution for short range applications.

The Bluetooth Low Energy (BLE) standard is designed to reduce power consumption by establishing very fast connections (few ms) and transferring small amounts of data. Using these techniques, energy consumption is reduced to a tenth of Classic Bluetooth. Bluetooth Low Energy devices can be put into a sleep mode and activated for event activities such as sending files to a gateway, PC or mobile phone. Furthermore, the maximum power consumption is less than 15 mA and the average power consumption is about 1 uA. Thus, a small coin cell – such as a CR2032 – is capable of powering a device for up to 10 years of operation.

The NEW PAN1326/1316 Host Controlled Interface (HCI) Series also brings Texas Instrument’s CC2564, to an easy-to-use module format. Panasonic’s tiny footprint technology offers a module of only 85.5 mm2 including antenna. The modules are designed to accommodate PCBs pad pitch of 1.3mm and as little as two layers for easy implementation and manufacture.

Applications
  • Sports and Fitness
    • Heart Rate Monitor
    • Blood Pressure Sensor
    • Blood Glucose Meter
    • Thermometer
  • Assisted Living
    • Flood Alarm
    • Heating Control
    • Automatic Key Control
  • Industrial Sensors
  • Toys
  • Entertainment Devices
  • Mobile Accessories
  • All Bluetooth Wireless Applications
Product Performance:
  • Best-in-class Bluetooth RF performance (Tx power, Rx sensitivity, blocking)
  • Fully Qualified Bluetooth v4.0 EDR
  • Dimensions PAN1326: 9mm x 9.5mm x 1.8mm (width x length x height)
  • Dimensions PAN1316: 6.5mm x 9mm x 1.7mm (width x length x height)
  • Certifications: Bluetooth, FCC, IC and CE
  • Operating Temperature Range: -40°C to +85°C
  • Supply Voltage Range: 1.7 - 4.8V
  • Profiles:  SPP, A2DP and AVRCP
  • Based upon TI's CC2564
  • Integrates with TI's ultra low-power MSP430 microprocessor
  • Very fast algorithm for both ACL and eSCO
  • Supports Extended Range Tx power with 10dBm typical output
  • Low power scan method for page and inquiry scans at 1/3rd normal power
Interfaces:

The PAN1326/PAN1316 Host Controlled Interface supports several transport layers with the following features:
  • UART Rates of up to 4Mbps
  • Three and Four Wire UART Transport

Specifications:
Parameter Value Condition / Notes
Receiver Sensitivity (BER=10-3) -93 dBm GFSK, Typical, Dirty TX On
Output Power
10 dBm VDD_In = VBAT
Power Supply 1.7 - 4.8 V Battery or DC/DC
Ultra Low Power Mode 135 uA 1.28s Interval
GFSK DH1\DH5 33 mA Full Throughput
Operating Temperature Range -40°C to + 85°C

 

Part Numbers:
ENW-89823A2KF PAN1326, CC2564, Bluetooth & Bluetooth Low Energy, HCI module, antenna
ENW-89823C2KF PAN1316, CC2564, Bluetooth Bluetooth Low Energy, HCI module, no antenna

 

Block Diagram PAN1326:

 

Block Diagram PAN1316: