PAN1327/1317

Make your product Powered by Panasonic

Overview

FCC Approved

New – High
Temperature
Module!

Introducing Panasonic's newest breakthrough in wireless networking, the PAN1327/1317 Series RF Modules featuring both Dynastream's ANT wireless protocol and Bluetooth connectivity. This powerful new technology combination creates a low cost, ultra-low power wireless networking solution for short range applications.

The ANT protocol is perfectly suited for low data rate sensor network topologies in personal area networks (PANs) and practical wireless sensor networks (WSN's). The PAN1327/1317 provides a building block for ANT+™ devices, allowing the creation of interoperable products through implementation of ANT+ device profiles. ANT+ managed network software facilitates the collection, automatic transfer and tracking of sensor data for monitoring personal wellness information. ANT applications are most commonly found in sports and low power medical devices.

The PAN1327/1317 Host Controlled Interface (HCI) Series also brings Texas Instrument's CC2567, to an easy-to-use module format. Panasonic's tiny footprint technology offers a module of only 85.5 mm2 including antenna. The modules are designed to accommodate PCBs pad pitch of 1.3mm and as little as two layers for easy implementation and manufacture.


Applications
  • Sports and Fitness
    • Heart Rate Monitor
    • Blood Pressure Sensor
    • Blood Glucose Meter
    • Thermometer
  • Assisted Living
    • Flood Alarm
    • Heating Control
    • Automatic Key Control
  • Industrial Sensors
  • Toys
  • Entertainment Devices
  • Mobile Accessories
  • All Bluetooth Wireless Applications
Product Performance
  • Best-in-class Bluetooth RF performance (Tx power, Rx sensitivity, blocking)
  • Fully Qualified Bluetooth v4.0 EDR
  • Dimensions PAN1327: 9mm x 9.5mm x 1.8mm (width x length x height)
  • Dimensions PAN1317: 6.5mm x 9mm x 1.7mm (width x length x height)
  • Certifications: Bluetooth, FCC, IC and CE
  • Operating Temperature Range: -40°C to +85°C
  • Supply Voltage Range: 1.7 - 4.8V
  • Profiles: SPP, A2DP and AVRCP
  • Based upon TI's CC2567
  • Integrates with TI's ultra low-power MSP430 microprocessor
  • Very fast algorithm for both ACL and eSCO
  • Supports Extended Range Tx power with 10dBm typical output
  • Low power scan method for page and inquiry scans at 1/3rd normal power
Interfaces:
The PAN1327/PAN1317 Host Controlled Interface supports several transport layers with the following features:
  • UART Rates of up to 4Mbps
  • Three and Four Wire UART Transport

Part Numbers:
Part Number Description
ENW-89827A2KF PAN1327, CC2567, Bluetooth & ANT, HCI module, antenna
ENW-89827C2KF PAN1317, CC2567, Bluetooth & ANT, HCI module, no antenna
 
Specifications:
Parameter Value Condition / Notes
Receiver Sensitivity (BER=10-3) -93 dBm GFSK, Typical, Dirty TX On
Output Power 10 dBm VDD_In = VBAT
Power Supply 1.7 - 4.8 V Battery or DC/DC
Ultra Low Power Scan 135 uA 1.28s Interval
GFSK DH1\DH5 33 mA Full Throughput
Operating Temperature Range -40°C to + 85°C
 
Block Diagram PAN1327:
pan1327 blockdiagram
 
Block Diagram PAN1317:
pan1327_blockdiagram