PAN1311/1321 Series

Make your product Powered by Panasonic

Overview

FCC Approved

Also Available!
Evaluation Kits
Introducing the New PAN1311/1321 Series. This newest Series of Bluetooth RF Modules is a highly integrated, cost engineered solution for Bluetooth applications using Serial Port Profile (SPP). The PAN1311/1321 Series is a full Bluetooth system solution, with an integrated controller and antenna, Bluetooth transceiver, SPP Profile, FCC and Bluetooth product certifications. Using Panasonic's exclusive "tiny footprint" technology, incorporating a Surface Mount Device (SMD) Land Grid Array (LGA) package, the PAN1311/1321 Series is just 15.6 mm by 8.7 mm! A fully shielded case protects the transceiver from nearby RF emitters, simplifying PCB layout. The PAN1311/1321 is qualified to the Bluetooth 2.0 standard.

PAN1311/1321 is perfect for all applications migrating from USB or RS232 to wireless. The integrated Bluetooth SPP is easily accessed using a simple AT command set. Evaluation and Development Kits are available. These modules are FCC and Bluetooth certified and comply with the national and international regulations, such as ETSI EN300328 and IC.


Applications
  • All Wireless Applications
    • Printer Adapter and Scanners
    • Printers
    • Access Points
    • Wireless Sensors
    • Cable Replacement
    • Personal Digital Assistants (PDAs)
    • PC Motherboards & Peripherals
    • Industrial Applications
Product Performance
  • Supported Profiles: RFCOMM, SPP device A and B
  • Complete Bluetooth 2.0 + EDR solution
  • Dimensions PAN1311: 11.6 x 8.7 x 1.8 mm3
  • Dimensions PAN1321: 15.6 x 8.7 x 2.8 mm3
  • Ultra low power design
  • Certifications: Bluetooth and FCC
  • No external components needed
  • Operating Temperature Range: -40°C to +85°C
  • On-module voltage regulator. External supply 2.7-3.6V
  • Integrates ARM7TDMI, RAM and patchable 256k EEPROM (for device configuration data and application)
  • Based upon Infineon's PMB8753/2
  • Reference clock included
  • Low power clock from internal oscillator or external low power clock
Interfaces:
The PAN1311/PAN1321 Serial Port Profile Interface supports:
  • 3.25 MBuad UART
  • General purpose I/Os with interrupt and wake-up capabilities
  • JTAG for boundary scan and debug

PAN1311 Part Numbers:
Part Number Description
ENW-89810K5CF PAN1311, Bluetooth Module v 2.0, EDR, SPP
EVAL_PAN1311 PAN1311 Evaluation kit
 
PAN1321 Part Numbers:
Part Number Description
ENW-89811K4CF PAN1321, Bluetooth Module v 2.0, EDR, SPP, with antenna
EVAL_PAN1321 PAN1321 Evaluation kit
 
Specifications for PAN1311 and PAN1321:
Parameter Value Condition / Notes
Receiver Sensitivity (BER=10-3) -86 dBm Ideal signal
Output Power +3 dBm @ 50 Ohm antenna pin
Power Supply 2.7 - 3.6 V Single operation voltage
Ultra Low Power Scan 80 uA T = 25°C
ACL (Transmit 3-DH1) 40 mA Enhanced Data Rate, 531.2 kb/s (1)
ACL (Receive 3-DH1) 37 mA Enhanced Data Rate, 531.2 kb/s (1)
Operating Temperature Range -40°C to + 85°C  
(1) Figure indicates maximum possible data rate with this packet type. Total throughput depends on application and interface setting.
 
Block Diagram PAN1311:
pan1311 block diagram
 
Block Diagram PAN1321:
pan1321 block diagram