PAN1315

Make your product Powered by Panasonic

Overview

FCC Approved
Panasonic's new PAN1315 Host Controlled Interface (HCI) Bluetooth RF module brings Texas Instrument's seventh generation Bluetooth core integrated circuit, the CC2560, to an easy to use module format. Panasonic's tiny footprint technology has produced a module of only 58.5mm². The module is designed to accommodate PCBs pad pitch of 1.3mm and as little as two layers for easy implementation and manufacturing.

This module has been designed to be 100% pin compatible with the next generation of Bluetooth Low Energy devices. This unique design feature enables designers to seamlessly transition between Bluetooth Classic and Low Energy modules.

The PAN1315 makes connectivity between mobile devices such as cellular phones and small button cell battery powered devices like fitness sensors, watches, healthcare, entertainment and mobile accessories easily implemented, creating a seamless data chain from sensors to the web.
PAN1315 Full Specification

Watch the latest PAN1315 Bluetooth® RF Module Video!

PAN1315 Not Recommended For New Design
Applications
  • Consumer Health Devices
    • Heart Rate Monitor
    • Blood Pressure Sensor
    • Blood Glucose Meter
    • Thermometer
  • Assisted Living
    • Flood Alarm
    • Heating Control
    • Automatic Key Control
  • Industrial Sensors
Product Performance
  • Best-in-class Bluetooth RF performance (Tx power, Rx sensitivity, blocking)
  • Fully Qualified Bluetooth v2.1 EDR
  • Dimensions: 6.5mm x 9mm x 1.7mm (width x length x height)
  • Certifications: Bluetooth, FCC, CE, IC
  • Operating Temperature Range: -40°C to +85°C
  • Supply Voltage Range:
  • Profiles: SPP, HDP
  • Based upon TI's CC2560
  • Integrates with TI's ultra low-power MSP430 microprocessor
  • Very fast algorithm for both ACL and eSCO
  • Supports Extended Range Tx power with 10.5dBm typical output
  • Low power scan method for page and inquiry scans at 1/3rd normal power
Interfaces:
The PAN1315 Host Controlled Interface supports several transport layers with the following features:
  • UART Rates of up to 4Mbps
  • Three and Four Wire UART Transport

Part Numbers:
Part Number Description
ENW-89818C2JF PAN1315, CC2560 HCI module, no antenna
PAN1315ETU PAN1315, Development module, for use with EVAL_PAN1315 evaluation kit
EVAL_PAN1315 PAN1315 Evaluation kit, includes TI MSP430 controller
 
Specifications:
Parameter Value Condition / Notes
Receiver Sensitivity (BER=10-3) -93 dBm GFSK, Typical, Dirty TX On
Output Power 10.5 dBm VDD_In = VBAT
Power Supply 1.7 - 4.8 V Battery or DC/DC
Ultra Low Power Scan 135 uA 1.28s Interval
eSCO Link 2-EV3 8.3 mA No Retransmission
EDR 3-DH1\3-DH5 39.2 mA Full Throughput
Operating Temperature Range -20°C to + 70°C -40°C to + 85°C with EEPROM
 
Block Diagram:
pan1315 block diagram