PAN1315ETU

Make your product Powered by Panasonic

Overview

FCC Approved
Panasonic's unique Easy-To-Use (ETU) series of modules, plug directly into evaluation kits with the added benefit of header connectors that simplify prototype wiring and field trials.

The engine of the PAN1315ETU is Panasonic's new PAN1315 Host Controlled Interface (HCI) Bluetooth RF module based upon Texas Instrument's seventh generation Bluetooth core integrated circuit, the CC2560.

The PAN1315 series has been designed to be 100% pin compatible with the next generation of Bluetooth Low Energy devices. This unique design feature enables designers to seamlessly transition between Bluetooth Classic and Low Energy modules.

PAN1315 Full Specification

PAN1315ETU Design Guide

Watch the latest PAN1315ETU Bluetooth® RF Module Video!
Applications
  • Consumber Health Devices
    • Heart Rate Monitor
    • Blood Pressure Sensor
    • Blood Glucose Meter
    • Thermometer
  • Assisted Living
    • Flood Alarm
    • Heating Control
    • Automatic Key Control
  • Industrial Sensors
Product Performance
  • Best-in-class Bluetooth RF performance (Tx power, Rx sensitivity, blocking)
  • Fully Qualified Bluetooth v2.1 EDR
  • Dimensions: 6.5mm x 9mm x 1.7mm (width x length x height)
  • Certifications: Bluetooth, FCC, CE, IC
  • Operating Temperature Range: -40°C to +85°C
  • Supply Voltage Range:
  • Profiles: SPP, HDP
  • Based upon TI’s CC2560
  • Integrates with TI’s ultra low-power MSP430 microprocessor
  • Very fast algorithm for both ACL and eSCO
  • Supports Extended Range Tx power with 10.5dBm typical output
  • Low power scan method for page and inquiry scans at 1/3rd normal power
Interfaces:
The PAN1315ETU Host Controlled Interface supports several transport layers with the following features:
  • UART Rates of up to 4Mbps
  • Three and Four Wire UART Transport

Part Numbers:
Part Number Description
ENW-89818C2JF PAN1315, CC2560 HCI module, no antenna
PAN1315ETU PAN1315, Development module, for use with EVAL_PAN1x15 evaluation kit
EVAL_PAN1315 PAN1315 Evaluation kit, includes TI MSP430 controller
 
Specifications:
Parameter Value Condition / Notes
Receiver Sensitivity (BER=10-3) -93 dBm GFSK, Typical, Dirty TX On
Output Power 10.5 dBm VDD_In = VBAT
Power Supply 1.7 - 4.8 V Battery or DC/DC
Ultra Low Power Scan 135 uA 1.28s Interval
eSCO Link 2-EV3 8.3 mA No Retransmission
EDR 3-DH1\3-DH5 39.2 mA Full Throughput
Operating Temperature Range -20°C to + 70°C -40°C to + 85°C with EEPROM
 
Block Diagram:
pan1315 block diagram