PAN2350

Make your product Powered by Panasonic

Overview

The PAN2350 is a low power UHF narrowband transceiver, specially designed for both ISM and SRD band frequencies. It is easily programmed for operation at a number of other frequencies. This small module offers a low cost, fully integrated solution for many wireless applications. The PAN2350 is made for applications where a narrow band bidirectional data transfer function is needed but can also be used in wide band bidirectional applications.

PAN2350 Full Specification

Applications
  • Wireless Alarm And Security Systems
  • RKE - Two-Way Remote Keyless Entry
  • Home Automation Systems
  • Automated Meter Reading
  • Low Power Telemetry
  • Toys
Product Performance:
  • Maximum Data-rate Up To 153.6 kBaud (NRZ Mode)
  • Low Power Consumption- Frequency Range 804 - 940 MHz or 402 - 470 MHz
  • High Sensitivity (Up To 121 dBm For A 12.5 kHz Channel)
  • Programmable Output Power Up To 10 dBm
  • Low Supply Voltage (2.3 V to 3.6 V)
  • Small Size: 14.8mm x 20.3mm x 4.2mm
  • Operating Temperature Range: -40°C to +85°C
  • Digital RSSI and Carrier Sense Indicator
  • Suitable For Frequency Hopping Systems
  • Single Port Antenna Connection
  • Complies With EN 300 220 And FCC CFR47 Part 15

Specifications:
Parameter Value Condition / Notes
Receiver Sensitivity
(BER=10-3)
  433 MHz
  868 MHz
-117 dBm
-116dBm

12.5 kHz channel width, FSK@2kHz,
2.4kBaud, Manchester coded
Output Power
  433 MHz
  868 MHz
-20 to +10 dBm
-20 to +5 dBm
Delivered to 50Ω load.
Output power is programmable.
RSSI Dynamic Range 63 dBm range Digital Output
PLL Lock Time (Rx/Tx turn time)
12.5 kHz channel width, 433 MHz
25 kHz channel width, 868 MHz
1.3 ms
1.1 ms
Up to 1MHz frequency step to within +/- 1kHz
PLL turn-on time from power down
mode with crystal oscillator running
12.5 kHz channel width, 433 MHz
25 kHz channel width, 868 MHz
4.8 ms
2.5 ms
Time from writing to registers to PLL lock
Power Down Mode 0.2 uA typ.
Oscillator Core Off
Current Consumption
(Receive Mode 433 / 868 MHz)
16.9 / 17.6 mA typ. 25 kHz channel width. Lower current can be
achieved at other settings
Current Consumption
(Transmit Mode 433 / 868 MHz)
P=3mW (5dBm)
16.8 / 33.0 mA typ. Delivered to 50Ω load.
Output power is programmable.

Notes:
All parameters belong to VCC = 3.0V, Tamb = 25°C
Chipcon's CC1020 is used in this module.


Part Numbers:
ENW59604NC1 PAN2350, 868 MHz, 4.8KBPS, Tx 5 dBm
ENW59604NC2 PAN2350, 868 MHz, 153.6KBPS, Tx 5 dBm
ENW59604NC3 PAN2350, 433 MHz, 4.8KBPS, Tx 10 dBm
ENW59604NC4 PAN2350, 434 MHz, 156.8KBPS, Tx 5 dBm
EVAL_PAN2350 Evaluation Kit for the PAN2350