PAN4555ETU

Make your product Powered by Panasonic

Overview

FCC Approved
The PAN4555ETU Easy-To-Use (ETU) module is the easiest way to make the first step into the SNAPĀ® world. It provides pinned I/O for testing and prototyping with a 0.1" (2.5mm) perf or stripboard. No special designs are needed to get this module working. This module is a short range, low power, 2.4 GHz ISM band transceiver which includes a complete 802.15.4 physical layer (PHY) modem. Designed for the IEEE 802.15.4 wireless standard and an independant micro-controller (MCU) with a reference oscillator to provide a cost effective solution for short-range data links and networks. Software is included.

PAN4555 Full Specification

Discontinuation of PAN4555 Series RF Modules
Applications
  • Remote Control And Wire Replacement In Industrial Systems Such As Wireless Sensor Networks
  • Factory Automation / Motor Control
  • Home Automation
  • Lighting Control
  • RFID Tagging
  • Inventory Management
  • Automated Meter Reading
  • Monitoring (Environmental, Patient or Fitness)
Product Performance
  • Pin Pitch: 2.54mm / 0.1"
  • 16 Selectable Channels With 250 Kbps In The 2.4 GHz Band
  • Low Power Modes For Increased Battery Life
  • High Sensitivity Of -92 dBm Typical At 1% Packet Error Rate
  • 0 dBm Typ. Output Power Programmable Over A 30 dB Range
  • Low Supply Voltage (2.0 V To 3.4 V, 2.7 V Typical)
  • Operating Temperature Range: -40°C To +85°C
  • Link Quality And Clear Channel Assessment Capability
  • 60k Flash And 4k RAM Memory
  • 4 Channel A/d Converter With 10 Bit Adc For Fast And Easy Conversion From Analog Inputs (Temperature, Pressure And Fluid Levels) To Digital Values
  • 3 Channel 16 Bit Timer/pulse Width Modulation (Tpm) Outputs
  • BDM Port For Direct Download Programming
  • In Total 20 Digital I/O Lines With Programmable Pull-ups And Few With High-current Driver
  • FCC, ETSI, IC Approved

Specifications:
Parameter Value Condition / Notes
Receiver Sensitivity -92 dBm typical For 1% packet error rate
Output Power 0 dBm Maximum
Power Supply 2.0 V to 3.4 V Single supply, 2.7 V typical
Power Control Range 30 dB  
Maximum Data Rate 250 kbps Over the air
Current Consumption
  Receive Mode
  Transmit Mode
  Idle Mode
  Doze Mode
  Hibernate Mode
  Off Mode

37 mA typ.
30 mA typ.
500 uA typ.
35 uA typ.
1 uA typ.
<1 uA typ.


Output power
nominal value

No CLKO
Operating Temperature Range -40°C to +85°C  
Pin Layout:
Part Numbers:
EVAL_PAN4555ETU PAN4555 Development Module, 2.4 GHz