Versatile Functions for Public Information Displays
In addition to the high resolution of Full-HD and the wide viewing angle of the IPS panel, the LF30 Series features 700-cd/m² brightness and 9-ms response. This makes it possible to display crisp, clear images even in bright places, for signage with excellent information transmission performance.
Wide Viewing Angle for Sharper Images
The IPS panel has a wide viewing angle, so colors don&t change when the image is viewed from right or left angles. Information can be accurately relayed to groups of people in large areas, like public spaces.
Flexible, Vertical Installation
The display can be installed either horizontally or vertically to match the content and installation location without being affected by "Mura" (unevenness). This is because the display has relatively uniform pressure distribution as compared to a TV panel, which results in far better stability. Regardless of the installation direction, the lamp life stays the same since a constant operating temperature is maintained.
While raising heat dissipation efficiency, the unique Panasonic fanless design resists dust entry and lowers operating noise. Dust particles are not sucked inside, so the display can be installed just about anywhere.
Narrow bezel and multi display
The bezel on the TH-47LF30 is only 18.6 mm (0.73 inches) wide. This allows it to blend in with the installation space and gives greater visibility to the images on display. The bezel is also less noticeable in multi-screen displays, for effective large-screen applications.
10-watt (5W + 5W) speakers are built-in to the left and right sides of the rear panel. This eliminates the need to attach external speakers when sound is required, for quick and easy installation.
Simply pressing the ECO button on the remote control switches the setting to lower power consumption.
CUSTOM: The menu of power consumption reduction is individually set.
ON: The following fixed values are set to the menu of power consumption reduction. Individual setting is not available.
•No Signal Power Off: Enable
•PC Power Management: On
•DVI-D Power Management: On
•Power Save: Sensor
Power is automatically turned on or off in response to a sync signal from the equipment connected to the built-in PC* input terminal.
•Auto Power Off
When you&re using a device connected to the terminals, the display panel goes into standby mode after about 10 minutes if no sync signal is received.
•Standby Power Save Mode
Reduces power consumption when on standby.
* DPMS compliant
You can prevent operating errors in public places by making tamper-resistant settings in advance.
The screen saver reduces the possibility of afterimages or image retention that can occur when displaying still images with constant, unchanging brightness for long periods of time. The Auto Power Off setting can also be set to automatically turn the power off when the screen saver operation ends.
The status of the display, such as the power supply, input signal, display temperature and accumulated hours of use, can be remotely monitored via an RS-232C interface. This enables a quicker response to problems when operating systems for advertising purposes or information display.
When the power plug has been removed and re-inserted, or when the power has temporarily gone off due a power outage, the display can be set to turn its own power back on once the power supply has been restored.
For video walls and other multi-unit applications, this function automatically shifts the power-on time slightly for each display unit in the system, so there&s less load on the power supply.
The Multi-Display function enlarges images up to five times their original size, both vertically and horizontally. It enlarges images by the same zoom ratio in both vertical and horizontal directions, such as 2x2, 3x3, 4x4 and 5x5, or by different ratios in order to effectively use vertically or horizontally elongated spaces. LCD display versatility can be further enhanced by freely selecting the zoom ratio to match the installation space.
* Some degradation occurs when images are enlarged.
* Provide an appropriate air-conditioned environment because the ambient temperature varies depending on the installation condition and location.
When this mode is turned off, a full-screen image of the display panel, including edges (the entire width of the frame), is displayed. This is especially suitable for displaying text information, since no words are hidden by the frame. The image areas that are hidden by borders can be adjusted in both vertical and horizontal directions.
Simply press the Auto Setup key on the remote control to position the picture. This function automatically corrects the horizontal and vertical picture positions, the Clock Phase, and the Dot Clock when an RGB signal is input. The adjustment results in optimal standard values for horizontal and vertical picture sizes.
* When digital RGB signal input, Dot Clock and Clock Phase cannot be made.
The 1:1 Pixel mode maps the 1920 × 1080 video content to full-HD panel pixels to display 100% of the original content. By skipping the scaling process, this mode is able to produce high-definition images in their original, 1:1 pixel form.
* Compatible signal format: 1,125/50i, 60i, 24sF, 24p, 25p, 30p, 50p, 60p, 1,250/50i
This function lets you enlarge a portion of an image up to four times its normal size and display it on the full screen. This function can help give presentations greater impact.
• Digital Zoom does not work in Multi Display or Dual Picture mode.
• Some degradation occurs when images are enlarged.
The SLOT2.0 function slot on the LF30 Series greatly expand the display&s range of applications. It lets you mount an optional function board to suit your application. It also features a variety of input terminals, including DVI-D In/Out and RS-232C In/Out, for connection of displays in a daisy chain configuration for greater operating efficiency.