Panasonic&s innovative 4-lamp optical system uses newly developed 300-watt AC lamps to deliver remarkable 12,000-lumen/10,000-lumen brightness. The 4-lamp system means superb reliability too - the projector keeps working even if one lamp goes out. A full 24 hours of continuous operation is possible in Lamp Relay mode.
* The values above are maximum values when all 4 lamps are replaced simultaneously, and when they are used in cycles of being turned on for 3.5 hours and off for 0.5 hour. When the lamps are turned on and off more frequently, the lamp replacement cycle is shortened. (It is recommended that the mechanical shutter be used to turn images off for a short period.)
Panasonic&s Dynamic Iris uses a scene-linking aperture mechanism to achieve a remarkable 5,000:1 contrast without lowering the 12,000-lumen/10,000-lumen brightness. It helps reproduce deeper, richer blacks and gives images more detailed textures.
3D Color Management System
Some people like to view large-screen images from relatively close up to get the maximum viewing impact. But at close range, the colors perceived by the human eye tend to differ slightly from the original colors. The 3D Color Management System solves this problem by enabling fine adjustment of colors so they appear faithful to the originals when projected onto a large screen.
Full 10-Bit Processing
Use of a full 10-bit picture processing system helps achieve smooth tonal expression. Complexions and other flesh tones look natural and true-to-life, with accurate gradation.
Dual Link HD-SDI Signal Support (Optional)
Just add an ET-MD100SD4 expansion board and the projector supports Dual Link HD-SDI signals. HD-SDI signals use two cables to achieve twice the color resolution of the conventional single link system.
Auto Cleaning Robot
Panasonic&s Auto Cleaning Robot automatically cleans the air filter to help keep the projector running smoothly. When the projector is switched on,*1 the robot uses a brush to clear away any dust adhering to the filter, helping to prevent clogs that can impair operation or cause malfunctions. The projector can be used for around 2,000 hours before the filter needs to be cleaned, making it a good choice for installation in tight spaces or for ceiling-mounted applications. Also, the Micro-Cut Air Filter traps particles as small as 10 microns.*2 This greatly reduces the amount of dust entering the projector, helping maintain high brightness and stable operation.
*1 Cleaning time can be set by a timer from 00:00 to 23:50 in 10-minute intervals, or controlled manually. The cleaning process is done only once per 24 hours. When the set time is reached, the cleaning process will begin if the projector is on or in cooling mode.
*2 Such as lint particles and pollen.
■Smoke Cut Filter
The optional ET-SFD100 Smoke Cut Filter can be mounted in place of the Auto Cleaning Robot&s tray. This optional smoke filter must be used when using the projector at events where smoke or fog is dispersed.
Liquid Cooling System
This advanced system uses a pump to circulate a cooling liquid behind the DLP™ chips to absorb heat. This Panasonic&s technology is made possible by the reflective nature of the DLP™ system which enables an airtight chip structure that minimizes image-quality loss due to dust In addition, it allows operation within a wide ambient temperature range of 0°C to 45°C (32°F to 113°F) *1 and reduces operating noise to 43 dB.*2
*1 The operating temperature range is 0°C to 40°C (32°F to 104°F) when used in High-Altitude mode (1,400 m to 2,700 m [4,593 feet to 8,858 feet]). Also, if the ambient temperature exceeds 40°C (104°F) (35°C [95°F ] in High-Altitude mode) when using all four lamps, the light output may be reduced approximately 30% to protect the projector.
*2 Average value at time products are shipped from the factory, in accordance with JIS X 6911:2003 data projector specifications. Measurement methods and conditions are based on Article 2 of JIS X 6911:2003 data projector specifications.
Web Browser Control The PT-DZ12000/D12000/DW100 can be easily operated remotely over a LAN
network, because it is done using the computer&s familiar web browser.
Furthermore, the projector sends an e-mail message to notify the operator
when an error has occurred, or a lamp needs to be replaced.
The LAN terminals support PJLink™ class 1 connection. Control with the same specifications is also possible when used in a multi-projector system with projectors of another brand
Multi Projector Monitoring & Control Software
Panasonic’s original Multi Projector Monitoring & Control software allows the user to control and monitor multiple projectors at the same time via LAN. When a problem occurs, an larm message is sent to the monitoring/controlling PC.
Lamp LED Indicator and Self-Diagnosis Function
The PT-DZ12000/D12000/DW100 projector body is equipped with a temperature alarm LED and a burnt-lamp alarm LED (for lamps 1 to 4), visible from both the front and the top. Information on the error is also given in the on-screen display. A self-diagnosis function is also provided. Error codes displayed on the 3-digit, 7-segment LED on the side of the projector tell the operator what the problem is.
Made In Japan
PT-DZ12000/D12000/DW100 projector is carefully manufactured at the Panasonic factory in Japan under strict quality control. This is another very important advantage of Panasonic projectors.
Built-in Multi-screen Support System
* Image uniformity may suffer due to the screen and lamp mode selection.
The edges of adjacent screens can be blended and their luminance controlled. For example, the adjoining edges in a 2-screen system can be blended to create a smooth, seamless image.
When several units are used together, this function corrects for slight variations in the color reproduction range of individual projectors. The PC software assures easy, accurate control. Independent, 7-axis adjustment (red, green, blue, yellow, magenta, cyan, white) ensures high precision colors and minimizes color variations.
The PT-DZ12000/D12000/DW100 can project large, multi-screen images without any additional equipment. Up to 100 units (10 x 10) can be edge-blended at a time.
The optical axis can be adjusted both vertically and horizontally by a remote control, giving you greater setup ease and flexibility.
Small Size and 120-VAC* Convenience
Despite its 12,000-lumen / 10,000-lumen power, the projector is compact, weighs only 77.1 lbs (35 kg) and runs on ordinary 120-VAC* power. This makes it easy to add to existing facilities and suitable for use at concerts, performances, and other events.
* PT-DZ12000U/D12000U/DW100U only
Flexible Mounting Angle
Flexible mounting allows a 360° vertical range.* Dramatic showroom displays can be achieved by projecting directly downward or upward.
* A special fixture must be attached to the lamp unit when the projector is placed at an angle within ±45° (downward) of the vertical.
* The horizontal range is ±15°.
A Wide Selection of Lenses
Choose from a wide lineup of lenses for your system, including short-throw, long-throw zoom and fixed-throw lenses for rear projection use. The additional lenses make it easy to adapt your projector to the installation site. The lens cover opens completely for easier mounting.
Multiple Terminal Including DVI-D and LAN Slot
The PT-DZ12000/D12000/DW100 comes equipped with DVI-D and LAN (PJ-Link™) slots. It also features an array of terminals, including two RGB inputs and D-sub HD 15-pin, a 5-BNC connector, serial in/out, S-video input, two remote inputs, and one remote out. In addition to offering DVI-D control, the PT-DZ12000/D12000/DW100 is HDCP*-compliant and thus meets a broad range of projection needs.
* High-Bandwidth Digital Content Protection
Easy Lamp Replacement Removing a single screw is all it takes to open the rear cover. This makes it easy to replace a lamp while the projector is still in the mounting bracket – a big advantage in tight ceiling-mounted installations.
Remote Control with Blind Touch Operation Contoured surfaces let you operate the control keys by touch. Connection terminals and controls are illuminated by LEDs, and the remote control is fully backlit for sure, easy operation in the dark. The wireless remote control has a range of 98.4 feets (30 m), so you can control the projector from a good distance
4 Direction Grip Grooves on all four sides of the projector&s bottom let you get a firm, comfortable grip on the unit so that it can be moved safely.
• Mechanical lens shutter
• Picture in picture (The picture in picture function cannot be used with some input signals and selected inputs.)
• Anti-theft features with chain opening
• ID assignment for up to 64 units
• Built-in test pattern
• Selectable 9-language on-screen menu (English, German, French, Spanish, Italian, Russian, Japanese, Chinese, Korean)