High Brightness*1 and High Contrast*2 in a Lightweight Body
Remarkably high brightness*1 and high contrast*2 have been achieved in a compact, easy-to-carry body, weighing only 2.99 kg (6.59 lb.) or less.*3 Bright, clear images enhance a variety of viewing situations and applications.
*1 Brightness by model: PT-LW25H: 2,500 lm, PT-LX30H: 3,000 lm, PT-LX26H/LX26: 2,600 lm, PT-LX22: 2,200 lm
*2 Contrast ratio by model: PT-LW25H: 3,000:1, PT-LX30H/LX26H: 2,500:1, PT-LX26/LX22: 500:1
*3 Weight by model: PT-LW25H/LX30H/LX26H: approx. 2.99 kg (6.59 lb.), PT-LX26/LX22: approx. 2.90kg (6.39 lb.)
A maximum 4,000-Hour*1 Lamp Replacement Cycle and 4,000-Hour*2 Air Filter Replacement Cycle
These handy portables offer a lamp replacement cycle of up to 4,000 hours*1 for extended, maintenance-free use.
The three-layered air filter, in which each layer contains a different mesh size, also achieves a replacement cycle of up to 4,000 hours.*2
This reduces maintenance hassles for long periods of use, and helps to lower maintenance costs and reduce environmental impact.
*1 This is the maximum value when the lamp power is set to Eco, with the lamp turned on for 2 hours and off for 0.25 hours. Increases in the lamp on cycle or extended use with the lamp continuously turned on will shorten the lamp replacement cycle. When the lamp power is set to High or Normal, the lamp replacement cycle is up to 3,000 hours. The usage environment affects the lamp replacement cycle.
*2 With the lamp power set to Eco. The usage environment affects the duration of the filter.
Quiet 29-dB Design Does Not Interrupt Meetings or Classes
The quiet design keeps noise levels down to 29 dB,* so the sound of the cooling fan is hardly noticeable.
This helps the audience to keep their attention on the speech when someone is giving a presentation or on the
screen images during quiet scenes.
* With the lamp power set to Eco.
Environmentally Friendly Standby Power Consumption of Only 0.47 W
When Standby mode is set to Eco,* the standby power consumption is low at 0.47 W.
This lowers running costs, and helps to reduce environmental impact.
* Standby mode: Eco. When Standby mode is set to Eco, network functions such as standby on via LAN are not available.
Also, only certain commands can be received for external control using the serial terminal.
A Wide Variety of Functions for Easy Setup
Versatile Interfaces Support a Wide Range of System
Interfaces include two computer (RGB) inputs,*1 a wired LAN terminal,*2 and a serial (RS-232C) terminal for external control.
These features support a wide range of system architectures for portable or ceiling-mounted use.
*1 The PT-LX26/LX22 has only one computer (RGB) input.
*2 LAN terminal: For the PT-LW25H/LX30H/LX26H only
Easy Remote Monitoring and Control over a LAN (PT-LW25H/LX30H/LX26H)
A web browser on a computer connected through a wired LAN system lets you remotely operate projectors and check their status. An e-mail messaging function can also notify you when a lamp needs replacement, and indicate the overall projector status.
In addition, Multi Projector Monitoring and Control Software is available for monitoring and controlling multiple Panasonic projectors from a single PC.
The wired LAN terminal is compatible with PJLink™(class1), an open protocol that is used by many manufacturers, to enable integrated control of systems that contain different brands of projectors.
1-Watt Speaker Enables Audio Playback Directly from the Projector (PT-LW25H/LX30H/LX26H)
These portable projectors feature 1-watt speakers that produce a clear sound without requiring external speakers.
Top-Panel Lamp Replacement Simplifies Maintenance
The lamp can be reached through the top panel for easy replacement. This eliminates the need to detach the projector from its ceiling bracket and greatly simplifies maintenance.
Direct Power Off
The cooling fan continues to operate even when the main power switch is turned off after projection is finished. This also allows the power to be turned off by directly switching off the room&s main breaker for systems, such as ceiling mounted systems, where the main power switch cannot be reached.
Effective Theft Prevention with Startup Logo
You can change the default Panasonic start up logo to any logo you want. A new logo can be easily uploaded by connecting a computer to the projector through the LAN* or serial connection by using the Logo Transfer Software.
* LAN: For the PT-LW25H/LX30H/LX26H only.
• Presentation support/control tools such as Presentation Timer, Freeze Function, and Digital Zoom
• Projector identification system for remote control allocation of up to six projectors