A unique Dual Lamp drive system has helped to make the body compact, while two newly developed, high output, 420 W Lamps provide high brightness of 10,000 lm for the PT-DX100EK.
Dynamic Iris for a High 10,000:1 Contrast Ratio
Panasonic’s Dynamic Iris uses a scene-linking aperture mechanism to achieve a remarkable 10,000:1 contrast without lowering its high brightness. This helps to reproduce deeper, richer blacks, and provides images with more detailed textures.
* Full On/Off, with dynamic iris on.
The New Dynamic RGB Booster Enhances Both Brightness and Colour Reproduction
Panasonic’s RGB Booster achieves high image quality with levels of colour reproduction and brightness that make each colour stand out. It combines Panasonic’s proprietary Vivid Colour Control technology with a Lamp Modulation Drive System for a 1-chip DLP™ Projector that produces bright and vivid colours. This has been further advanced in the PT-DX100EK Projector with the development of the Dynamic RGB Booster. Images are analysed frame by frame, and scene-linking and real time modulation are used to achieve high brightness and vivid colour reproduction.
Because the Lamp power was fixed, colour reproduction was enhanced by sacrificing brightness.
Dynamic RGB Booster
Images are analysed frame by frame, and the Lamp output is modulated to match each scene. This achieves optimal brightness and colour reproduction for a wide variety of scenes.
The boost amount is controlled in real time as the images are projected.
Note: The above images are simulated.
Vivid Colour Control
This unique control technology optimises the use of the colour segment areas of the colour wheel. It increases the brightness of each RGB colour by minimising the unallocated portions between the colours, to achieve truly vivid colouring.
Lamp Modulation Drive System
With the advanced lamp modulation technology, the Projector is able to control the Lamp intensity for each of the red, green, blue, and white segments of the colour wheel separately. Because the actual light output is controlled in relation to each colour segment, light usage is optimised and colour balance is obtained without lowering the brightness. This results in bright vivid images with increased colour fidelity.
Detail Clarity Processor 3 Gives Natural Clarity to Even the Finest Details
This unique Panasonic circuit optimises the sharpness of each image, based on the super high, high, medium, and low frequency components of the extracted image information. The resulting images have more natural, lifelike expression.
System Daylight View 2 for Enhanced Colour Perception
This unique Panasonic technology optimises image quality to improve the colour perception of the projected image in bright rooms. With a brightness of 10,000 lm, it provides highly comfortable viewing even in bright lighting, and allows viewers to concentrate easily on the images.
DICOM Simulation Mode*
This imaging mode is similar to DICOM Part 14, which is a medical imaging standard. It reproduces X-ray images with remarkable clarity.
* This product is not a medical instrument. Do not use it for actual medical diagnosis.
Rec. 709 Mode for HDTV Projection
Optimal colour reproduction can be achieved by selecting this mode, compliant with ITU-R Recommendation BT.709, when images from an HDTV source are projected.
Waveform Monitor Function
When the output level of the source device fluctuates due to the performance of the device or its cable connections, the original black and white levels of the image content cannot be reproduced correctly. With the PT-DX100EK Projector you can view the waveforms on the screen and adjust the settings either automatically or manually as you prefer.
Full-HD Ready WUXGA Resolution
The PT-DX100EK features native WUXGA resolution for Full HD viewing.
This brings you lifelike projection of intricate, highly detailed images.
Advanced Technologies for Excellent Image Quality
• 3D Colour Management System
• Full 10-bit Image Processing
• Progressive Cinema Scan (3:2 Pull Down)
• Dynamic Sharpness Control
• Digital Noise Reduction
• IP Conversion
• AI Scene Control
• 2:2 Pull Down Mode
• sRGB Compatibility
Panasonic’s Original Dual Lamp System
This system eliminates the interruption if a Lamp should fail (in Dual-Lamp operation mode). The Lamp Relay mode also operates the Lamps alternately to enable 24/7 projection.*
* If the Projector is to be operated continuously 24 hours a day / 7 days a week, use the Dual-Lamp optical system’s alternating Lamp operation (Lamp Changer) function. The Projector cannot be operated continuously 24 hours a day / 7 days a week in Dual-Lamp mode. Allow a minimum of two hours per week of non-operation time per Lamp if using the Dual-Lamp mode.
Long Lamp Life Contributes to Low TCO
The PT-DX100 Series Projectors lower the total cost of ownership because they have a Lamp replacement cycle of up to 4,000 hours.*
* With the LAMP POWER set to ECO mode in Dual Lamp operation.
The usage environment affects the Lamp replacement cycle.
Filter Less Dust Resistant Optical Engine
A Heat-Pipe Cooling System Maintains Stable Operation up to 45°C*
A new optical cooling system featuring a heat pipe block suppresses temperature rises inside the Projector and allows stable operation up to an ambient temperature of 45°C (113°F).* The use of this heat-pipe cooling system also achieves quiet operation, enabling viewers to concentrate on the presentation, or on quiet movie scenes.
* The operating temperature range is 0°C to 45°C (32°F to 113°F) when used in locations from 1,400 m to 2,700 m (4,953 ft to 8,858 ft) above sea level. If the ambient temperature exceeds 35°C (95°F), the light output may be reduced to protect the Projector.
Dust Resistant Optical Block
The optical block, the heart of the Projector, is hermetically sealed to resist the effects of dust and other particles in the air, which makes it possible to remove the air filters for optics. It also contributes to the low TCO.
Easy Lamp Replacement*
For easier maintenance, you can replace the Lamp from the rear. This makes it easy to replace a Lamp unit while the Projector is still in the mounting bracket or dual stacked.
* The Lamp Filter must be replaced at the same time as the Lamp.
DIGITAL LINK Transmits Digital Signals Up To 100 m (328 ft) With A Single Cable
DIGITAL LINK - The Single Cable Solution
Equipped with a DIGITAL LINK terminal, the PT-DX100EK Projector allows transmission of HDMI, uncompressed HD digital video and control signals (Ethernet, RS-232C) for up to 100 meters (328 feet) through a single CAT5e (STP) cable or higher.
This simplifies cabling and system upgrades, making it ideal for ceiling mounted and other permanent installations.
Note: Audio signals cannot be transmitted because the PT-DX100 Projector has no speaker or audio output terminal.
Optional ET-YFB100G Digital Interface Box for Easy Set Up
By combining the optional ET-YFB100G Digital Interface Box, with its HDMI and other input terminals, uncompressed HD digital video and control signals can be transmitted up to 100 metres (328 feet) over a single CAT5e (STP) cable or higher. It allows Projector connection with only one cable, making it ideal for ceiling mounted and other permanent installations.
Also, because control signals can be simultaneously transmitted, the ET-YFB100G input signal can easily be switched with the wireless Remote Control that is included with the Projector. The Projector can be controlled by either serial or LAN communication.
Also Supports Other Manufacturers’ Peripheral Equipment
DIGITAL LINK is an original function added to technology based on the transmission standards used in Crestron’s DigitalMedia 8G+, Extron’s XTP Systems, etc. Used together with the new ET-YFB100G Digital Interface Box, or other compatible equipment, the installation of this Projector is easier than ever, without any need for external receivers.
The PT-DX100EK Projector is compatible with the Art-Net protocol for lighting management.
Art-Net compatibility lets you connect the Projector to the lighting console, and operate functions such as Shutter On/Off, Input Change, Power On/Off, etc., together with the light control.
* Art-Net is a protocol for transmitting the lighting control protocol DMX512 over the Ethernet.
Multi-Screen Support System Seamlessly Connects Multiple Screens
The Multi-Screen Support System optimally adjusts multiple screens: Edge Blending, Colour Matching and Multi-screen Processor.
The edges of adjacent screens can be blended and their luminance controlled.
This function corrects for slight variations in the colour reproduction range of individual Projectors.
The PC software assures easy, accurate control.
The PT-DX100 Projectors can project large, multi-screen images without any additional equipment. Up to 100 units (10 x 10) can be edge-blended at a time.
Multi-Unit Brightness Control
This function automatically corrects the brightness fluctuations that occur over time in the individual Projectors of a multi-screen system. Up to eight Projectors can be controlled by connecting to each other via a hub, and this can be increased to a maximum of 2,048 Projectors by using “Multi Projector Monitoring & Control Software
Active 3D Projection Capability
The series is compatible with both passive and active 3D projection systems.
It combines with either a separate, external 100 / 120 / 144 Hz drive with IR emitter and active shutter glasses, or an active filter and passive glasses, for viewing 3D images.
The wide adjustment range of the powered horizontal / vertical lens shift function can be easily adjusted with the Remote Control. The unit can also be rotated 360° vertically, to accommodate various installation conditions. The lens-centered design contributes to easy installation.
Portrait Mode Capability (Optional)*
Portrait projection is possible by mounting the optional ET-LAD120P or ET-LAD120PW Lamp units, updating the Projector’s firmware**, and installing the Projector with its terminal side surface facing downward.
Note: Please contact your sales representative for information on portrait orientation.
* Please contact the sales representative with regard to the frame for portrait orientation. Installation is possible only with the terminal side facing downward. Horizontal rotation and vertical rotation are both limited to 15 degrees. Also, the Lamp replacement cycle is 1,000 hours with the LAMP POWER set to NORMAL mode in Dual Lamp operation, and is affected by the usage environment.
** Firmware will be available by September 2013.
*** The ET-LAD120P and ET-LAD120PW cannot be used when the Projector is in landscape orientation.
Multiple Terminals with HD-SDI Compatibility
The PT-DX100E Projectors has an array of terminals, including 3D sync, DVI-D and HDMI terminals.
Note: HDMI, the HDMI logo, and High-Definition Multimedia Interface are trademarks or registered trademarks of HDMI Licensing LLC in the United States and other countries.
Easy Remote Monitoring and Control over a LAN
Web browser on a Computer connected through a wired LAN system lets you remotely operate Projectors and check their status. An e-mail messaging function can also notify you when a Lamp needs replacement, and indicate the overall Projector status.
The wired LAN terminal is compatible with PJLink™ (class1), an open protocol that is used by many manufacturers, to enable integrated control of systems that contain different brands of Projectors.
A Wide Selection of Optional Lenses
Choose from a wide line up of lenses for your system, including Long Throw Zoom Lenses and a Ultra Short Throw Lens for rear projection use.
The additional Lenses make it easy to adapt your Projector to the installation site. The Lenses attach and detach with one-touch ease.
ET-DLE030 The Lens with the World's Shortest Throw* NEW
Panasonic’s new ET-DLE030 Ultra Short Throw Lens enables 100 inch projection from a 0.80 m (2.6 ft) distance. It’s a powerful solution for the hassles of installation in a narrow space.
* For detachable Lenses as of July 2013.
Requires sufficient airflow space around the projector. This throw distance shows the case of the PT-DZ870.
For example, promotional images can be projected even in the narrow space of a retail store showcase, where image projection is not possible with a general-purpose lens.
NOTE: The usage examples shown above are simulated images.
In actual installation, a predetermined amount of space must be provided around the projector.
Other Valuable Features
• P-in-P Function*
• Mechanical Lens Shutter with Fade In/Out Effect
• Scheduling Function
• Direct Power Off
• 30 m Long-Range Wireless Remote Control
• Anti-Theft Features with Chain Opening
• Control Device Setup Function
• ID Assignment for Up to 64 Units
• Built-in Test Pattern
• Selectable 10-Language On-Screen Menu
(English, German, French, Spanish, Italian, Portuguese, Russian, Japanese, Chinese, Korean).
• RoHS Directive Compliant
* This function cannot be used with some input signals and selected inputs.
All PT-DX100E Series projectors are carefully manufactured at the Panasonic factory in Japan, under strict quality control.
This is another, very important advantage of a Panasonic projector.