WV-CP480 Series

WV-CP480 Series

• 1/3-type double speed CCD colour image sensor.
• The new Pixel Based 160x Dynamic Range with area free natural contrast image correction adjusts moment-to-moment changes in contrast to view subjects accurately in all areas and positions.
• Switches from selected colour mode to B/W mode, automatically or manually.

WV-CP480 Series

Close

Features

• 1/3-type double speed CCD colour image sensor.
• The new Pixel Based 160x Dynamic Range with area free natural contrast image correction adjusts moment-to-moment changes in contrast to view subjects accurately in all areas and positions.
• Switches from selected colour mode to B/W mode, automatically or manually.
• Higher horizontal resolution of 540-line (typical) at colour mode, and 570-line at B/W mode.
• Minimum illumination: 0.5 lux at colour mode, 0.06 lux at B/W mode, at F1.2 optional lens 0.6 lux at colour mode, 0.08 lux at B/W mode, at F1.4 optional lens
• Innovative intelligent features: *Auto Back Focus (ABF) adjustment function, for easy focus at installation and remote focus fine tuning (up-the-coax or via network by WJ-HD300 Series) after installation. *Auto image stabilizer function for applications where vibration or wind is a concern, e.g. passing vehicles. *Scene change detection alarms when lens is covered, spray painted, removed, defocused or camera angle is changed.
• Signal to noise ratio of 50dB.
• Digital motion detector.

• Menu setup can be displayed in 8 (eight) languages: English, German, French, Spanish, Italian, Russian, Chinese and Japanese.
• 16-alphanumeric character display.
• Electronic shutter from 1/50 (off) to 1/10,000 sec. • Electronic sensitivity enhancement (auto/manual/off). • Digital signal processing LSI's for high quality picture: 2H vertical enhancement, chroma averaging circuit, minimum of aliasing, knee circuit, and highlight aperture correction.
• Gen-lock capability for the large system application.
• VD2 sync capability with Panasonic system products.
• Remote control function with single coaxial cable (WV-CP480/WV-CP484) or RS-485 terminal (WV-CPR480/WV-CPR484).
• Accepts both 24V AC or 12V DC power source (WV-CP484/WV-CPR484 models).

Support

Get Support

for WV-CP480 Series