AG-MSU10

AG-MSU10

• Fast Copying from a P2 Card to a Built-in Removable SSD*¹
• Backup onto an External HDD with eSATA/USB 2.0
• Compact, Lightweight, Robust Design and Battery Drive

AG-MSU10

Close

Features

Fast Copying from a P2 Card to a Built-in Removable SSD*1


The AG-MSU10 has a P2 card slot and an interface box for housing a commercially available 2.5-inch solid state drive (SSD)*1. Copying from a P2 card to the SSD can be done. The SSD has a maximum capacity of 2 TB (terabytes). HD files recorded with an AVC-Intra 100 codec (video bit rate: approximately 100 Mbps) can be copied at about four times*2 normal speed, and about eight times*2 normal speed for files recorded with an AVC-Intra 50 (video bit rate: approximately 50 Mbps).



Backup onto an External HDD with eSATA/USB 2.0


The AG-MSU10 is equipped with eSATA and USB 2.0 interfaces (both Host and Device). In Host mode, files in the internal P2 card can be copied onto an external HDD at high speed without a PC /Mac. In Device mode, the AG-MSU10 can be used as an external drive for reading and writing data between a PC, Mac or nonlinear editing system and a P2 card or SSD.


* In Host mode, reading and writing is only possible with the P2 card. The SSD cannot be used. The P2 card/SSD can be used in Device mode, but reading and writing with the P2 card is only possible with the USB 2.0 interface.


The Removable SSD Connects Directly to a PC/Mac


The removable SSD interface box is equipped with both eSATA and USB 2.0 connectors. It can be removed from the AG-MSU10 and connected directly to a PC, Mac or nonlinear editing system for use in Device mode. This enables flexible operation as a removable media.


* One SSD interface box comes with the AG-MSU10. Additional boxes AG-MBX10 are optionally available.

Single Button Copy and Thumbnail Display


Copying from a P2 card to a built-in SSD can be done swiftly with singlebutton operation. A clip thumbnail can also be displayed onto the built-in 3.2-inch LCD panel and images can be copied clip by clip. The condition and status displays enable easy-to-understand operation.



Compact, Lightweight, Robust Design and Battery Drive


The AG-MSU10, which has superb portability features and a compact, lightweight and robust design, can also be battery driven. The P2 card and SSD ensure reliable use even in extremely harsh shooting conditions.



Note:

*1 Use a commercially available removable SSD that is recommended by Panasonic. In addition to the removable SSD interface box that comes with the AG-MSU10 as a standard accessory, an additional AG-MBX10 can be purchased as an option.
*2 File transfer speed varies depending on the SSD and external HDD writing speed, transferred files, P2 card version, and other conditions. Without verification.

Specs

Product Image
Fast Copying from a P2 Card to a Built-In Removable SSD
Backup onto an External HDD with eSATA/USB 2.0
Compact, Lightweight, Robust Design and Battery Drive