Support RSS Feed

Search

Search filters applied

Search Results

Other Suggested Searches
Did you mean:
No results found.

Suggestions:
  • Make sure that all words are spelled correctly
  • Use different words that mean the same thing
Results 1 - 10 of 11
  1. Use this procedure to do a forced HUB reset, this will affect all of its settings, including Wi-Fi settings. 1.  Disconnect the AC adaptor from the hub. 2.  While pressing the...
  2. Confirm the following before you begin. ► Make sure you have installed the [Home Network] app on your mobile device. ► Make sure your mobile device can connect to the Internet. ► Make sure the hub...
  3. Confirm the following before you begin. ► Make sure you have installed the "Home Network" app on your mobile device. ► Make sure your mobile device can connect to the Internet. ► Make sure the hub...
  4. If the LED on the HUB is flashing green it means that the HUB has lost connection with the home wi-fi router. The cause of this loss could be due to; ⦁     The router was...
  5. After you have used your mobile device to perform the initial setup procedure, you can add other mobile devices to the system (up to 8 in total). Before following this procedure, make sure you have...
  6. After you have used your mobile device to perform the initial setup procedure, you can add other mobile devices to the system (up to 8 in total). Before following this procedure, make sure you have...
  7. People find that once they have set up there Hub to the router and the cameras are on the Connected Home Network it is all working well. This is your local home network and what this is telling you...
  8. Yes. When you turn the camera upside down you will see that there is a mounting plate located on the foot of the camera. This allows for 2 screws to set in a wall and the camera will then slide onto...