E2TYPE

High Static Ducted

Concealed duct / Air conditioning mode

High static and large airflow ducted for exceptional installation flexibility.

Technical focus

  • Design flexibility thanks to high static pressure and large air volume
  • DC motor equipped
  • Power input 45% less (compared to E1 type)
  • Discharge air temperature control to reduce cold drafts
    during heating operation
  • Configurable air temperature control
  • Available Fresh Air Intake mode (See page 80-81)
E2TYPE High Static Ducted Concealed duct / Air conditioning mode

3-step static pressure set up

You can select between the three Static Pressure modes of 270 Pa/140 Pa/60(72*) Pa for extra installation flexibility.

3-step static pressure set up

Max. 270 Pa static pressure setting

A maximum static pressure setting of a high 270 Pa enables the use of long ducts for installation in a wide range of spaces. Ideal for large-scale offices, restaurants and other facilities.

Sensible cooling 5-10% improved

New heat exchanger with φ7mm pipe that increases the heat transfer surface to improve sensible cooling (5-10% improvement)

No Rap Valve Kit required

Thanks to improved performance, a Rap Valve Kit is
no longer required.

No Rap Valve Kit required

Discharge air temperature control

  • Equipped with 4 sensors (Intake/ Discharge)
  • Able to control discharge air temperature for accurate room temperature control.
  • Possible to reduce cold drafts during heating operation.
Discharge air temperature control