Our website uses cookies and similar tools to improve its performance and enhance your user experience and by continuing to use this website without changing your settings, you consent to their use. To find out more about the cookies we use or how to change your settings, please see our Cookies Policy. OK Learn More

Photo of YD-400RX1

YD-400RX1

Technical Specifications YD-400RX1
INPUT Voltage 415, +10%, -20% Volts.
Phase/Freq. 3ph/50-60 No./Hz
@60% Duty cycle 16.2/15.6 KVA/KW
OUTPUT Rated Current Range 50-400 Amps
Rated Output Range 16.5-35.5 Volts
@60% Duty cycle 400 Amps
@100% Duty cycle 310 Amps
GENERAL Power Control Method IGBT Inverter Controlled
Digital Display 4 Digit-7 segment LED Display
Wave from Control Digitally Controlled Waveform
Welding Sequence a. Main welding
b. Main welding-crater
(Crater repeat is available)
c. Main welding-crater
(Crater repeat is available)
Ingress Protection IP 23 Class
Insulation H Type
Cooling Forced air cooling
Power Factor > 0.9 Degree C
Operating Temperature -10 to 50
Dimensions (LxBxH) 54.5x38x57 cm
Weight 52 Kg
WIRE FEEDER Rated Welding Current 400 Amps
Applicable wire diameter 0.08 cm, 0.1 cm, 0.12 cm
Cable Length 1.8 m (gas hose 4.8 m)
Weight 10.5 Kg
Wire Feed Speed 5.3-20.1 Meter/ Minute
Duty Cycle 60%
WELDING TORCH Rated welding current 350 Amps
Duty Cycle 10 Min. Cycle 350 Amps, 60% (C02)
350 Amps, 35% (C02 + Ar)
Continuous 270 Amps, 100% (C02)
200 Amps, 100% (C02 + Ar)
Applicable Wire Diameter 0.08 cm, 0.1 cm, 0.12 cm
Cable Length 3 Meter
Weight (Incl. Cable) 2.8 Kg
Ordering Information Power Source YD-400RXIDJE
Wire Feeder YW-40KB3DAL
Welding Torch YT-35CS4DAF
Remote Management Controller TSMYU290
NOTE Wire feeder available in standard lenghts of 1.8 mtrs, 5 mtrs, 10 mtrs, 15 mtrs and 20 mtrs.

Our website uses cookies and similar tools to improve its performance and enhance your user experience and by continuing to use this website without changing your settings, you consent to their use. To find out more about the cookies we use or how to change your settings, please see our Cookies Policy. OK Learn More