Panasonic Malaysia

2-Way GE3 Series

Contact Us
2-Way GE3 Series

2-Way GE3 Series

· Maximum 60 HP combination
· Domestic Hot Water (DHW) priority setting
· Operating range in heating down to -21°C and up to +24°C for air to water system
· No defrost cycle
· Capacity ratio: 50-200% (16-25 HP), 50-170% (30 HP)
· Combination capacity ratio: 50% of smallest outdoor unit capacity - 130% of total capacity of outdoor unit combination

Contact Us

Features

What is GHP?

What is GHP?

The Panasonic Gas Heat Pump (GHP) VRF System is a direct expansion system with the same compressor as an electric VRF system. A gas engine is used as the driving source for the compressor instead of an electric motor.

Cost Reductions through Use of a Gas Engine

Significantly Reduced Power Consumption

GHP systems do not use any electricity other than that for driving fans or other auxiliary devices, so their power consumption is very low compared to EHP systems. Of course, ordinary power consumption is also reduced.

Significantly Reduced Power Consumption

Significant Cuts in Power-Receiving Equipment Costs

As GHP systems consume less power than EHP systems, they can significantly cut power-receiving equipment repair costs and be installed with minimal investment. They can also be used for air conditioning in non-electric areas.

Significant Cuts in Power-Receiving Equipment Costs

Waste Heat from Gas Engines can be Used for Domestic Hot Water (DHW)

Waste Heat from Gas Engines can be Used for Domestic Hot Water (DHW)

The rejected heat from the engine is available for DHW production and can supply up to 46 kW of hot water at 65°C. DHW at 65°C is also ready to use without additional electric heaters.

Mechanisms for High Operational Efficiency and Energy-Saving Performance

Improved Engine Torque Results in Reduced Energy Costs

As the GE3 Series takes up a large engine operating area at low speed, it maintains high torque even under low load during low RPM to demonstrate excellent operational control capability. Compared to the previous GE2 Series, the GE3 Series achieves excellent operational performance with lower fuel consumption.

Improved Engine Torque Results in Reduced Energy Costs

Increased Engine Pulley Diameter for Higher Efficiency

Compared to that on the previous GE2 Series, the engine pulley on the GE3 Series has a larger diameter to optimize the ratio between compressor speed and engine speed. The larger diameter improves performance under partial load and reduces the number of on/off rotations.

Increased Engine Pulley Diameter for Higher Efficiency

Improved Compression Efficiency through an Upgraded Compressor

The rotary compressor used in the GE3 Series has a smaller clearance between the roller and the outer circle, preventing the compression leakage of refrigerant and ensuring reliable compression. Further, increasing the size of the suction path has reduced suction pressure loss to ensure high compression efficiency even under high load (high speed operation). This contributes to quick temperature adjustments and lower operational costs.

Improved Compression Efficiency through an Upgraded Compressor

Environmentally Friendly

Low Environmental Impact

EHP VRF systems that run on electricity can lose up to approx. 60% of power during generation and transmission. On the other hand, Panasonic GHP VRF systems run on gas, which means there is no energy loss during transmission. As a result, compared to EHP systems, Panasonic GHP VRF systems can significantly reduce environmental load.

Low Environmental Impact

Low CO₂ Emissions

Panasonic GHP VRF systems run on natural gas, the energy source which generates the lowest amount of CO₂ when combusted. Further, as these systems do not generate large amounts of CO₂ from electricity generation at thermal power plants like EHP VRF systems do, they can drastically reduce CO₂ emissions.

Low CO₂ Emissions

Low NOx Emissions

The GHP VRF systems have the lowest nitrogen oxide (NOx) emissions. In a pioneering development, the Panasonic GHP features a brand-new lean-burn combustion system that utilizes air fuel ratio feedback control to reduce NOx emissions to an all time low.

Low NOx Emissions

Up to 64 Indoor Units can be Connected

Up to 64 Indoor Units can be Connected

Up to 64 indoor units can be connected, allowing for flexible system design to meet your business requirements.

*Maximum number of indoor units depends on outdoor unit capacity.

Support

Find Your Nearest Dealers →

image:A bird's-eye view map and map icons

Contact a Panasonic Sales Engineer →

Provides detailed information and support on air conditioning solutions from consulting on air conditioning selection to pricing, installation and after-sales service.

image:An operator consulting over the phone while looking at the screen

Download Catalogue →

image:Panasonic Product Catalog

Download Engineering Documents →

You can download marketing materials, manuals, CAD data, etc.

image : A staff working on the celling equipment

Case Studies

Panasonic supplies and installs a wide range of products in various types of residential and commercial buildings such as shops, restaurants, hotels, offices, clinics, and public buildings,  helping create cleaner and more comfortable environments all over the world.

LEARN ABOUT THE CATEGORY

Our Air Solutions