Photo of EYC217LJ2G57 18V Hammer Drill & Impact Driver Combo Kit

EYC217LJ2G57 18V Hammer Drill & Impact Driver Combo Kit

EY79A2LJ2G57 Max. Torque 32.0 N-m Stalling torque, 50.0 N-m Instand torque
Speed at No Load Low 30-470 min-1 (rpm)
High 70-1580 min-1 (rpm)
Blows Rate per Minute Low 540-8,500 bpm
High 1,2060-28,400 bpm
Clutch Torque 1.0-4.4 Nm (0.2 Nm per stage, total 18 stage)
Charging Time (using EY0L82B charger) Usable 65 minutes
Full 80 minutes
Weight (including battery) 2.10 kg
Size (LxHxW) 188mm x 250mm x 68mm
Max. Drill Diameter In Wood ᴓ38 mm
In Metal ᴓ13 mm
Max. Screws Driving Wood screw ᴓ8 mm
Self-drilling screw ᴓ6 mm
EY75A7LS2F57 Charging Time (using EY0L82B charger) Usable 65 minutes
Full 80 minutes
Weight (including battery) 1.70 kg
Size (LxHxW) 118mm x 242mm x 66mm
Max. Torque High/Hard Mode 160 Nm
Medium Mode 130 Nm
Low/Soft Mode 26 Nm
Self-drilling screw Mode 130 Nm
Speed at No Load High/Hard Mode 0-2500 rpm
Medium Mode 0-1450 rpm
Low/Soft Mode 0-950 rpm
Self-drilling screw Mode 0-2500 rpm
Impact/min High/Hard Mode 0-3100 ipm
Medium Mode 0-2900 ipm
Low/Soft Mode 0-1900 ipm
Self-drilling screw Mode 0-1200 ipm
NOTE * Comes with a battery charger (EY0L82B57) and carrying case
Also comes with 2 x 18V 5Ah batteries, charger (EY0L82B57) & carry case