Photo of EY79A2X57 14.4/18V Dual Hammer Drill & Driver (Skin)

EY79A2X57 14.4/18V Dual Hammer Drill & Driver (Skin)

Max. Torque 32.0 N-m Stalling torque, 50.0 N-m Instand torque
Speed at No Load Low 30-470 min-1 (rpm)
High 70-1580 min-1 (rpm)
Blows Rate per Minute Low 540-8,500 bpm
High 1,2060-28,400 bpm
Clutch Torque 1.0-4.4 Nm (0.2 Nm per stage, total 18 stage)
Charging Time (using EY0L82B charger) Usable 65 minutes
Full 80 minutes
Size (LxHxW) 188mm x 250mm x 68mm
Max. Drill Diameter In Wood ᴓ38 mm
In Metal ᴓ13 mm
Max. Screws Driving Wood screw ᴓ8 mm
Self-drilling screw ᴓ6 mm
NOTE * Battery pack and charger not included for EY79A2X57