$ #,###.00 000 010 //panasonic-newzealand.ibrandiq.com/en/Widgets/FluidPanNZ/{0} //panasonic-newzealand.ibrandiq.com/Products/MultipleInStock/FluidPanNZ/{0}
Photo of Wireless Video Intercom VL-SWD275AZS

Wireless Video Intercom VL-SWD275AZS

Model composition Main Monitor(VL-MWD275) x1, Door Station(VL-V524L) x1, Wireless monitor(VL-WD619) x 1, Power Supply Unit (VL-PS241) x1
Maximum Connectable Units Door Station Up to 2 (1 included with VL-SWD275)
Monitor Up to 3 extension monitors (not including the main monitor)
Wireless Monitor Up to 6 (1 included with VL-SWD275)
*A total of up to 6 Wireless sub monitors and Extension monitors can be registered.
Wireless Repeater Up to 2 (sold separately)
Connectable Devices E-lock Release Support Up to 2 (user supplied)
PBX Only Panasonic PBX
Convenience Picture Recording Internal memory: Up to 50 visitors/sessions (up to 4 still images per visitor/session)
Night Vision Yes (LED lights)
Touch Panel / Pan & Tilt - / -
Voice Changer Yes (One-touch)
Intercom call Yes (between main monitor, wireless sub monitor and extension monitor)
Monitor Power source Power supply unit (VL-PS241) 24 V DC, 0.6 A
Power consumption Standby: 2.2 W , Operating: 14.0 WMeasurement conditions: Main Monitor (1 pc.) with Door Station VL-V524 (1 pc.) is connected to VL-PS241, and wireless monitor VL-WD619 (1 pc.) is linked to the main monitor.
Dimensions (H x W x D) Approx. 158 x 201 x 25 mm
Mass (weight) Main monitor: 605 g
Power supply unit: 215 g (VL-PS241)
Operating environment Ambient temperature: Approx. 0 ℃ to +40 ℃, Relative humidity (non-condensing): up to 90 %
Display size 7-inch wide colour / WVGA (800 x 480 pixels) (Touch sensor keys)
Display language English, Arabic
Talking method Hands-free
Frequency range 1.88 GHz to 1.90 GHz
Installation method Wall mount (mounting bracket supplied)
External material Flame retardant ABS resin
Door Station Power source Power supplied by the main monitor
Dimensions (H x W x D) Approx. 152 x 102 x 35.5 (21.5 *) mm *Excluding sections embedded into the wall.
Mass (weight) Approx. 225 g
Operating environment Ambient temperature: Approx. -15 ℃ to +55 ℃, Relative humidity (non-condensing): up to 90 %
Talking method Hands-free
Viewing angle Horizontally: Approx. 85°, Vertically: Approx. 54°
Image sensor/ Camera (pixel) 1/3 inch CMOS sensor (Approx. 1.3 M pixels)
Minimum illuminance required 1 lx (within approx. 50 cm from the camera lens)
Lighting method LED lights
IP rating (INGRESS PROTECTION) IP44
*Water resistance is only assured if the doorstation is installed correctly according to the instructions in the Installation Guide, and appropriate water protection measures are taken.
Installation method Surface mount (mounting base supplied), Flush mount (mount box sold separately)
External material Flame retardant ABS resin
Wireless Monitor Power source Main body: Rechargeable battery AAA (R03)
Ni-MH battery (1.2 V, 550 mAh)x2
Dimensions (H x W x D) Approx. 173 x 52 x 30 mm (excluding protruding sections)
Mass (weight) Approx.160 g (including the batteries)
Operating environment Ambient temperature: Approx. 0 ℃ to +40 ℃, Relative humidity (non-condensing): up to 90 %
Display size 2.2-inch colour / QVGA (320 x 240 pixels)
Frequency range 1.88 GHz to 1.90 GHz
RF transmission power Approx. 10 mW (average powerper channel)
250 mW (max.)
Operating time Standby use: approx. 80 hours*When used fully charged in an operating temperature of 20 °C.
Charging time Approx. 8 hours*When the operating temperature is 20 °C. The charging time may increase when the operating temperature is lower than this.
Transmitting range Approx. 100 m (line-of-sight distance between the main and wireless monitor)
External material ABS resin
Charger Power source AC adaptor (5.5 V DC, 0.5 A)
Power consumption Standby: 0.6 W * , Charing: 1.6 W*When the sub monitor with full-charged batteries is placed on the charger.
Dimensions (H x W x D) Approx. 43 x 81 x 76 mm (excluding protruding sections)
Mass (weight) Approx. 70 g (excluding the AC adaptor)
Operating environment Ambient temperature: Approx. 0 ℃ to +40 ℃, Relative humidity (non-condensing): up to 90 %
External material ABS resin