Photo of Wireless Video Intercom VL-SWD501

Wireless Video Intercom VL-SWD501

Model composition Main Monito(VL-MWD501) x1, Door Station(VL-V554) x1, Wireless monitor(VL-WD613) x1,
Model composition Power Supply Unit(VL-PS241) x1
Optional Accessories Wireless Monitor VL-WD613 (1 included in VL-SWD501)
Door Station VL-V554 (1 included in VL-SWD501)
Repeater VL-FKD2
Wireless Sensor Camera VL-WD812
Maximum Connectable Units Wireless Monitor Up to 6 (1 included with VL-SWD501)
Door Station Up to 2 (1 included with VL-SWD501)
Connectable Devices Electric Lock Release Support Up to 2 (user supplied) * When connecting 2, an optional doorphone is required.
Repeater Up to 2 (sold separately)
PBX -
Convenience Picture Recording SD Card: Stores up to 3,000 visitors (30seconds per visitor)
Picture Recording Internal memory (when an SD card is not inserted): up to 50 events / 400 images (8-shot continuous recording
Night Vision Yes
Touch Panel / Pan & Tilt Yes / Yes
Voice Changer Yes
Intercom call Yes (between main monitor and wireless sub monitor)
Smartphone connect -
Monitor Power source Power supply unit (VL-PS241)
Power source 24 V DC, 0.5 A
Power consumption Standby: Approx. 1.4 W,
Power consumption During operation: Approx. 10 W
Dimensions (H x W x D) Approx. 180 x 165 x 21mm (excluding protruding sections)
Mass (weight) Approx. 470 g
Operating environment Ambient temperature: Approx. 0 °C to +40 °C, Relative humidity (non-condensing): up to 90 %
Display size 5-inch wide colour / WQVGA (480x272 pixels)
Display language English
Talking method Hands-free
Installation method Wall mount (mounting bracket supplied)
Frequency range 1.88 GHz to 1.90 GHz
Option output (A contact) Rated load: 24 V AC/DC, 0.3 A or lower
Option output (A contact) Minimum applicable load: 5 V DC, 0.001 A
Option output (A contact) (Output when there is a call from the doorphone)
External material Flame retardant ABS and PS resin
Power supply unit Power source Input: 220-240 V AC, 0.2 A, 50/60 Hz
Power source Output: 24 V DC, 0.6 A
Dimensions (H x W x D) Approx. 104 x 100 x 54 mm (excluding protruding sections)
Mass (weight) Approx. 215 g
Operating environment Ambient temperature: Approx. 0 °C to +50 °C, Relative humidity (non-condensing): up to 90 % (indoor use only)
Installation method Wall mount or attach to DIN rail
External material Flame retardant PC+ABS resin
Door Station Power source Power supplied by the main monitor
Dimensions (H x W x D) Approx. 169 x 118 x 30 mm (excluding protruding sections)
Mass (weight) Approx. 405 g
Operating environment Ambient temperature: Approx. -15 °C to +55 °C, Relative humidity (non-condensing): up to 90 %
Operating environment (tested up to -20 °C)
Viewing angle Horizontally: Approx. 170 degree, Vertically: Approx. 115 degree
Installation method Surface mount (mounting base supplied)
Image sensor/ Camera (pixel) CMOS sensor (Approx. 1.0M pixels)
Minimum illuminance required 1 lx (within approx. 50cm from the camera lens)
Lighting method LED lights
IP rating (INGRESS PROTECTION) IP54 *Water resistance is only assured if the doorphone is installed correctly according to the instructions in the Installation Guide, and appropriate water protection measures are taken.
IK rating (IMPACT PROTECTION) Compliant with IK07
External material Aluminium and flame retardant PC+PS resin
Wireless Monitor Power source Rechargeable Ni-MH (AAA x 2)
Dimensions (H x W x D) Approx. 173 x 52 x 30 mm (excluding protruding sections)
Mass (weight) Approx. 160 g (including the batteries)
Operating environment Ambient temperature: Approx. 0 °C to +40 °C, Relative humidity (non-condensing): up to 90 %
Display size 2.2-inch colour / QVGA (320 x 240 pixels)
Frequency 1.88 GHz to 1.90 GHz
External material ABS resin
Operating time Standby use: Approx. 80 hours *When used fully charged in an operating temperature of 20 °C.
Charging time Approx. 8 hours *When the operating temperature is 20 °C. The charging time may increase when the operating temperature is lower than this.
Transmitting range Approx. 100 m (line-of-sight distance from the main monitor)
Charger Power source AC adaptor
Power source Output: 5.5 V DC, 0.5 A
Power consumption Standby: Approx. 0.4 W (when the sub monitor is not placed in the charger)
Power consumption During charging: Approx. 1.4 W
Dimensions (H x W x D) Approx. 43 x 81 x 76 mm (excluding protruding sections)
Mass (weight) Approx. 70 g (excluding the AC adaptor)
Operating environment Ambient temperature: Approx. 0 °C to +40 °C, Relative humidity (non-condensing): up to 90 %
External material ABS resin