$ #,###.00 000 010 //panasonic-peru.ibrandiq.com/es/Widgets/Fluid/{0} //panasonic-peru.ibrandiq.com/Products/MultipleInStock/Fluid/{0}
Power Supply DC 12 V (when using an external power supply)
AC 240 V, 50 Hz/60 Hz (when AK-UCU500P/AK-UCU500PS/AK-UCU500E/AK-UCU500ES is connected)
Power Consumption 119 W (maximum, when connecting to an external 12 V and including supply to an externally connected devices)
360 W (maximum, when AK-UCU500P/AK-UCU500PS/AK-UCU500E/AK-UCU500ES is conncected and including supply to an externally connected devices)
Operating Temperature –10 °C to 45 °C (14°F to 113°F) (Preheating required under a temperature 0 °C (32 °F) or below)
Storage Temperature –20 °C to 60 °C (–4°F to 140°F)
Operating Humidity 85% or less (relative humidity)
Weight Approx. 4.4 kg (9.70 lbs.) (body only, excluding the accessories)
Dimensions (W x H x D) Body only 151 mm x 267 mm x 371.5 mm
(5-31/32 inches x 10-17/32 inches x 14-21/32 inches)
(excluding protrusions)
Pickup Device A K-UC3000: 11 million pixels, CMOS x 1
AK-HC5000: 2/3-type, 2.2 million pixels, MOS x 3
Optical Filter CC: 3200 K, 4300 K, 6300 K, Cross, Diffusion
ND: CAP, Clear, 1/4, 1/16, 1/64
Lens mount 2/3-type bayonet
Sensitivity Two shooting modes
AK-UC3000:
[ HIGH SENS ]: F10 (59.94 Hz)/F11 (50 Hz)
[ NORMAL ]: F6 (59.94 Hz)/F7 (50 Hz)
2000 lx, 3200 K, when white reflectivity is 89.9%
AK-HC5000:
[ HIGH SENS ]: F11 (59.94 Hz)/F12 (50 Hz)
[ NORMAL ]: F8 (59.94 Hz)/F9 (50 Hz)
2000 lx, 3200 K, when white reflectivity is 89.9%
Horizontal Resolution AK-UC3000:
4K: 1800 TV lines or above (center, AK‑UCU500P/AK‑UCU500PS/AK‑UCU500E/AK‑UCU500ES output)
HD: 1000 TV lines or above (center)
AK-HC5000: 1000 TV lines or above (center)
S/N 60 dB or above
Horizontal Modulation 50% or above (27.5 MHz)
Gain switching AK-UC3000:
[ NORMAL ]: −6, −3, 0, 3, 6, 9, 12, 15, 18, 21, 24, 27, 30, 33, 36
[ HIGH SENS ]: −6, −3, 0, 3, 6, 9, 12, 15, 18, 21, 24, 27, 30, 33, 36
AK-HC5000:
[ NORMAL ]: –3, 0, 3, 6, 9, 12, 15, 18, 21, 24, 27, 30, 33, 36
[ HIGH SENS ]: –6, –3, 0, 3, 6, 9, 12, 15, 18, 21, 24, 27, 30, 33, 36
Shutter speed • [59.94i]/[59.94p] mode: 1/100, 1/120, 1/125, 1/250, 1/500, 1/1000, 1/1500, 1/2000
• [29.97p] mode: 1/60, 1/100, 1/120, 1/125, 1/250, 1/500, 1/1000, 1/1500, 1/2000
• [23.98p] mode: 1/48, 1/60, 1/100, 1/120, 1/125, 1/250, 1/500, 1/1000, 1/1500, 1/2000
• [50i]/[50p] mode: 1/60, 1/100, 1/125, 1/250, 1/500, 1/1000, 1/1500, 1/2000
• [25p] mode: 1/50, 1/60, 1/100, 1/125, 1/250, 1/500, 1/1000, 1/1500, 1/2000
< HD SDI1 > terminal BNC x 1
HD (3G/1.5G): 0.8 V [ p-p ], 75 Ω
< HD SDI2 > terminal BNC x 1
HD (3G/1.5G): 0.8 V [ p-p ], 75 Ω
< AUX > terminal BNC x 1
Functions as < HD TRUNK >
terminal/< PROMPTER2 > terminal by switching the setting in the menu
< HD TRUNK >: HD (1.5G)
< PROMPTER 2>: VBS signal 1 V [p-p], 75 Ω
< G/L IN/PROMPTER OUT > terminal BNC x 1
< G/L IN >: Tri-level SYNC or BB (black burst)
< PROMPTER OUT >: VBS signal 1 V [p-p], 75 Ω
Functions as < G/L IN > when standalone, and as < PROMPTER OUT > when AK-UCU500P/ AK-UCU500PS/AK-UCU500E/AK-UCU500ES is connected
terminal XLR x 1, 3-pin
< LINE >/< MIC >/< +48 V > switchable For < MIC >, < FRONT >/< REAR > switchable < LINE >: 0 dBu, +4 dBu menu selection available
< MIC >: –60 dBu, –40 dBu, or –20 dBu menu can be selected
< MIC 2 > terminal XLR x 1, 3-pin
< LINE >/< MIC >/< –48V > switchable
< LINE >: 0 dBu, +4 dBu menu selection available
< MIC >: –60 dBu, –40 dBu, or –20 dBu menu can be selected
< MIC > terminal (front) XLR x 1, 3-pin
Switchable with < MIC 1 > terminal
< INTERCOM1 > terminal XLR x 1, 5-pin
< INTERCOM2 > terminal XLR x 1, 5-pin
< EARPHONE > terminal Stereo mini jack x 1, 3-pin
< OPT FIBER > terminal Optical composite connector x 1
< LENS > terminal 12-pin x 1
< VF > terminal 20-pin x 1
< VF > terminal (rear) 29-pin x 1
< DC IN > terminal XLR x 1, 4-pin, DC 12 V
< DC OUT 12 V 1 A > terminal 4-pin x 1
< RET CTRL > terminal 6-pin x 1
< EXT I/O > terminal 20-pin x 1, DC 12 V, 0.5 A
< REMOTE > terminal 10-pin x 1
< TRUNK > terminal 12-pin x
< DC OUT 12 V 2.5 A > terminal 2-pin x 1
< LAN > terminal RJ-45 x 1
< USB2.0 > terminal (host) Type A connector, DC 5 V, 0.5 A
Build-up terminal 20-pin x 1