The FSV-EX marks a revolutionary step forward in VRF efficiency. A look at the incredible EER value clearly indicates that. What’s more, this high EER value is achieved even during part load operation. This shows the extraordinary energy-saving performance the FSV-EX is capable of providing.
Excellent Energy Savings
The operation efficiency has been improved using highly efficient R410A refrigerant, new DC inverter compressor, and new heat exchanger design.
Extended Operation Range Up to 52°C
The FSV-EX can provide cooling even when the outside temperature reaches a maximum of about 52°C. And amazingly, it can still operate at 100% capacity when the outside temperature is as high as 43°C. This high power capability enables reliable operation even under extremely high temperature conditions.
Extended Operating Range
• Cooling operation is possible when outdoor temperature as low as -10°C DB
• Cooling operation is possible when outdoor temperature as high as 52°C DB
• Heating operation is possible when outdoor temperature as low as -25°C WB
The remote controller temperature can be set from 18°C up to 30°C (Cooling), 16°C up to 30°C (Heating)*.
* Depending on the type of remote controller.
Intelligent 3-Stage Oil Management System
In a VRF system, where lengthy piping and a large number of indoor units need to be controlled collectively, the key to maintaining the system’s reliability is to ensure an appropriate amount of oil is secured in the compressors. In order to avoid oil shortage in the compressor, maximum operation is normally forcibly conducted at regular intervals to recover oil from indoor units. This method, typically employed in a standard VRF, causes the system to overheat or overcool and thus waste energy. In Panasonic VRF systems, a sensor for detecting oil levels is mounted in each compressor. In installations with multiple outdoor units, a shortage of oil in one compressor can be compensated for by recovering oil
either from another compressor in the same unit, from a compressor in an adjacent outdoor unit, or from a connected indoor unit. Panasonic VRF systems provide users with a comfortable environment whilst saving energy.
The Panasonic System Efficiently Manages Oil Recovery in Three Stages
Minimising the frequency of forced oil recovery while reducing energy cost and maintaining comfort.
Features of 3-Stage Oil Recovery Design
1. Oil sensors installed in each compressor
Oil sensors installed in each Panasonic compressor precisely monitor oil levels, eliminating unnecessary oil recovery.
2.Highly functional oil separator
Thanks to extended separate piping, oil recovery efficiency reaches 90%, minimising the oil to be discharged from the compressor.
Extraordinary Energy-Saving Performance
Redesigned for Smooth and Better Air Discharge
Newly Designed Fan
Extended Compressor Life by Uniform Compressor Operation Time
The total run-time of compressors are monitored by a built-in microcomputer, which ensures that operation times of all compressors within the same refrigerant circuit are balanced.
Compressors with histories showing shorter run times are selected first, ensuring equal wear and tear across all units and extended the working life of the system.
*Depend on accumlated operation time of each compressors.
*Compressor priority has possibility to be changed.
(e.g) Case1: AgCgBgD, Case2: CgAgDgB, Case3: AgCgDgB, Case4: CgAgBgD
Automatic Backup Operation in The Case of Compressor Failure or Outdoor Unit Malfunction
Except for 8, 10 & 12 HP single unit installation
*Backup operation allows uninterrupted cooling or heating to continue whilst waiting for service.
Users should contact their authorised service centre as soon as fault occurs.
Featuring inverter control technology, all Panasonic FSV systems are Demand Response Management (DRM) ready. With this control, power consumption at times of peak load can be set in three steps to deliver optimum performance. This helps to reduce annual power consumption with minimal loss in comfort.
Hi-Durability Outdoor Unit
Corrosion-resistance treated for high resistance to rust and salty air to assure long-lasting performance.
Note: Selecting this unit does not completely eliminate the possibility of rust developing. For details concerning unit installation and maintenance, please consult an authorised dealer.
A Large Number of Indoor Units Can Be Connected
Up to 64 indoor units can be connected in a single system for ultimate design flexibility.
*Maximum number of indoor units depends on outdoor unit capacity.
Increased Piping Length for Greater Design Flexibility
Adaptable to various building types and sizes
Actual piping length : 200m
Max piping length : 1,000m
*Elevation difference of Max. 90m in case of ODU is higher than IDU may be allowed following certain conditions. Please consult with Panasonic sales engineers in case of piping elevation of over 50m is required.
*1: 40 m if the outdoor unit is below the indoor unit.
Up to 50m Length Difference between The Longest and The Shortest Piping From the First Branch
Flexible piping layout makes it easier to design systems for locations such as train stations, airports, schools and hospitals.
• Up to 64 units can be connected to one system.
• Difference between maximum and minimum pipe runs after first branch can be a maximum of 50m.
• Larger pipe runs can be up to 200m.
Connectable Indoor/Outdoor Unit Capacity Ratio Up to 130% *
FSV systems attain maximum indoor unit connection capacity of up to 130 %* of the unit’s connection range, depending on the outdoor and indoor models selected. So for a reasonable investment, FSV systems provide an ideal air conditioning solution for locations where full cooling/heating are not always required.
* If the following conditions are satisfied, the effective range is above 130 % up to 200 %.
I ) Obey the limited number of connectable indoor units.
ii ) The lower limit of operating range for heating outdoor temperature is limited to -10°CWB (standard -25°CWB).
iii ) Simultaneous operation is limited to less than 130 % of connectable indoor units.
The new ME2 series has reduced the installation space required with up to 20 HP available in a single chassis.
8 - 10 HP are able to fit inside a lift for easy handling on site.
High External Static Pressure on Condensers
With a newly designed fan, fan guard, motor, and casing, new models can be custom-installed on-site to provide up to 80 Pa of external static pressure. An air discharge duct prevents shortages of air circulation, allowing outdoor units to be installed on every floor of a building.
Numerous technological innovations, including an improved compressor and a newly designed bell mouth and larger fan, have dramatically reduced the outdoor noise level. The result is an even more comfortable building environment.
Air Conditioning Expertise
Since the introduction of our first window type air conditioner in 1958, Panasonic Air Conditioning has grown to become a globally recognised and celebrated brand, delivering unmatched quality and reliability.
Total Air Solutions
With over 300 products, Panasonic has a product or solution for every application. From residential applications to large scale commercial, we endeavour to provide fully customisable total air solutions for any and all applications.
Quality & Reliability
Panasonic air conditioners are manufactured to ensure years of reliable comfort. With a 5-year warranty encompassing both residential and commercial applications, you can rest easy with Panasonic.
Panasonic provides control solutions to satisfy all residential and commercial needs. Our range of controllers demonstrate flexibility in application, providing you with a comprehensive solution to any system need.
• Specifications, functions and designs are subject to change without prior notice for further improvement.
• Graphics are provided merely for the purpose of illustrating a point.
• Due to variances in display devices, actual colours may vary from those shown.