E3 High Static Splittable Ducted

Overview

Features

Support

Case Studies

E3 High Static Splittable Ducted

· Easy installation and maintenance with compact and splittable chassis design.
· High air flow rate of 1,400 L/s (22.4 and 28.0 kW model).
· Space saving 916 mm depth.
· Light weight of 84 kg (18.0 kW model).
· nanoe™ X: 100 times more nanoe™ particle for wide commercial space.

Line Up

Cooling Capacity (kW) (rated)	18.0	22.4	28.0
Cooling Capacity (Btu/h) (rated)	61,400	76,400	95,500
Model No.	S-180ME3H	S-224ME3H	S-280ME3H
Model No.

Features

A New Level of Air Quality with nanoe™ X
Generator Mark3

24-hour nanoe™ X Air Protection

nanoe™ X inhibits certain bacteria, viruses, pollens, allergens, mould, and hazardous substances contained in PM2.5. Providing effective deodorisation and improving the quality of your air. nanoe™ X functions in both cooling and fan modes, and is maintenance-free, helping you enjoy 24 hours of quality air while keeping your costs down.

LEARN MORE

Higher Concentration, Even in Large Space

The amount of hydroxyl radicals generated increased 100 times, compared to the original nanoe™, which achieves greater effectiveness even in large spaces of 112 m².

Conditions of the simulation ･Room size: 112 m² ･Room height: 2.4 m ･Inspection model: 4-Way Cassette ･Position of IDU: Centre
Note: The result is based on the conditions for the simulation and it may differ from the concentration measured in an actual room. nanoe™ particles are extremely tiny in nano-meter size. They cannot be seen, so the concentration image is solely for illustrative purposes.

LEARN MORE

Higher Concentration, Even in Large Space

Effective at Eliminating Odours in Only 30 Minutes

The nanoe X Generator Mark3 reduces odours by as much as 1.8 levels* in just 30 minutes. This is half the time required to achieve the same effect compared to the conventional nanoe X Generator Mark 2.

*A 1.8 level decrease in odour intensity is equivalent to a reduction of 95% or more.
[Odour intensity] 5: Very strong odour, 4: Strong odour, 3: Easily detectable odour, 2: Weak, recognisable odour (cognitive threshold concentration), 1: Barely detectable odour (detection threshold concentration), 0: No odour

Note: The test result is obtained using a 4-Way Cassette. **Testing Overview: [Testing organisation] Panasonic Product Analysis Center [Test method] Verification in a test room (approx. 230 m³ (6.8 x 8.5 x 4.0 m)) using a 6-step odour intensity display method [Method of deodorisation] Operation of a CS-P80U6 equipped with a nanoe X Generator Mark2 and release of nanoe™ [Target] Adhered aging odour (nonenal) [Test Result] Odour intensity reduced by 1.8 in 60 minutes (L19YK032-01) ***Testing Overview: [Testing organisation] Panasonic Product Analysis Center [Test method] Verification in a test room (approx. 230 m³ (6.8 x 8.5 x 4.0 m)) using a 6-step odour intensity display method [Method of deodorisation] Operation of a CS-P160U6 equivalent tester equipped with a nanoe X Generator Mark3 and release of nanoe™ [Target] Adhered aging odour (nonenal) [Test Result] Odour intensity reduced by 1.8 in 30 minutes (R21HM003-0)

Effective at Eliminating Odours in Only 30 Minutes

Lightweight and Compact for
Easy Delivery

The unit has a compact design with a depth of 916 mm and a weight of 84 kg*. This makes delivery, installation, and maintenance easier.

* 18.0 kW model

Lightweight and Compact for Easy Delivery

Splittable Design Makes It
Easy to Remove and Maintain

It can be disassembled in two steps, even in limited space, making maintenance easier when working on the ground.

1) Remove the screws and bolts to separate the casing from the main body.
2) Remove the screws and bolts to separate the fan from the heat exchanger.

Splittable Design Makes It Easy to Remove and Maintain

Max. 200 Pa Static Pressure
Setting for Large Facilities

A maximum static pressure setting of a high 200 Pa enables the use of long ducts for installation in a wide range of spaces. Ideal for large-scale offices, restaurants, and other facilities.

ECONAVI Sensor

Providing outstanding energy-saving performance, Panasonic’s inverter VRF System can be connected to ECONAVI to detect when energy is being wasted. ECONAVI senses the presence or absence of people and the level of activity in each area of an office. When unnecessary heating or cooling is detected, indoor units are individually controlled to match office conditions for energy-saving operation.

1. Detection of the level of activity enables optimum power saving.
2. Sensor is remotely located to maximise the energy-saving effect.

LEARN MORE

Leading Control Options

Panasonic air conditioning systems allow flexible control options. Individual, centralised, Cloud control and WLAN control are all possible. Please consult with a Panasonic air conditioning specialist for advice as to which control solution best suits your system requirements.

LEARN MORE

Support

Find Your Nearest Dealers →

image:A bird's-eye view map and map icons

Contact a Panasonic Sales Engineer →

Provides detailed information and support on air conditioning solutions from consulting on air conditioning selection to pricing, installation and after-sales service.

image:An operator consulting over the phone while looking at the screen

Download Catalogue →

Download Engineering Documents →

You can download marketing materials, manuals, CAD data, etc.

image : A staff working on the celling equipment

Case Studies

Panasonic supplies and installs a wide range of products in various types of residential and commercial buildings such as shops, restaurants, hotels, offices, clinics, and public buildings, helping create cleaner and more comfortable environments all over the world.