PT-FX400U

Installation Projector, 1024 x 768 XGA resolution, 4,000 lumens of brightness
How to Buy

Overview


All new Panasonic FW430 Series projectors provide a reliable 6,000-hour lamp that is retrofit friendly and easy to replace from the rear, while using inorganic, durable LCD panels that allow for a crisp, luminous picture quality. With the addition of a dust-resistant cabinet and a new, reusable Eco Filter, the FW430 Series saves on time, money and maintenance by allowing up to 12,000 hours of operation before filter replacement is necessary. And FW430 Series projectors offer greater installation flexibility than ever before with HDMI and DVI-I terminals that allow a wider range of input capabilities and features including a 2x Zoom Lens with horizontal/vertical Lens Shift that facilitates easy placement in a wide variety of rooms, and a new wireless application option that is compatible with the iPad, iPhone and iPod. Panasonic FW430 Series projectors fit the demands of any user, or any installation no matter what the requirements.


News & Reviews

Specs

Screen Size: 33-300 inches diagonally, 4:3 aspect ratio
Brightness (ANSI lumens): 4,000
Contrast Ratio: Up to 600:1
Optical Axis Shift: Vertical: ±51% from center of screen (manual),
horizontal: ±27% from center of screen (manual)
Lens: Manual (2× zoom), manual focus F 1.7-2.6, f 24.0-47.2 mm
Power Supply: 100-240 V AC, 3.9 - 1.4 A, 50/60 Hz
Power Consumption: 300 W
(0.3 W at 100-120 V AC, 0.4 W at 220-240 V AC when standby mode set to eco,*1 9 W when standby mode set to normal, 20 W when standby mode set to normal and audio monitor out.)
Panel Size: 20.3 mm (0.8 inches) diagonal (4:3 aspect ratio)
Display Method: Transparent LCD panel (x 3, R/G/B)
Pixels: 786,432 (1,024 x 768) x 3, total of 2,359,296 pixels
Keystone correction range: Vertical: +/-30 Degrees
Installation: Front/rear, ceiling/desk (menu selection)
Power cord length: 2 m (6'7)
Operating temperature 10°-40°C (32°-104°F)
Operating humidity: 20%-80% (no condensation)
Throw Ratio: 1.48-2.96:1
Colors: Full color (16,777,216 colors)
Wireless Remote Control Unit Operation range: Approx. 15 m (49'3" feet) when operated from directly in front of the signal receptor
LAN: RJ-45 for network connection, 10Base-T/100Base-TX, compliant with PJLink TM
S-VIDEO In: Mini DIN 4-pin x 1, Y: 1.0 Vp-p, C: 0.286 V [p-p], 75 ohms
HDMI IN: HDMI 19-pin × 1, Deep Color, HDCP compatible 480p, 576p, 720/60p, 720/50p, 1080/60i, 1080/50i, 1080/24p, 1080/24sF, 1080/25p, 1080/30p, 1080/60p, 1080/50p
YPBPR (YCBCR): 480i (525i): fH 15.75 kHz; fV 60 Hz,
576i (625i): fH 15.63 kHz; fV 50 Hz,
480p (525p): fH 31.50 kHz; fV 60 Hz,
576p (625p): fH 31.25 kHz; fV 50 Hz,
720 (750)/60p: fH 45.00 kHz; fV 60 Hz,
720 (750)/50p: fH 37.50 kHz; fV 50 Hz,
YPBPR (YCBCR) continued:: 1080 (1125)/60i: fH 33.75 kHz; fV 60 Hz,
1080 (1125)/50i: fH 28.13 kHz; fV 50 Hz,
1080 (1125)/24p: fH 27.00 kHz; fV 24 Hz,
1080 (1125)/60p: fH 67.50 kHz; fV 60 Hz,
1080 (1125)/50p: fH 56.25 kHz; fV 50 Hz
Terminals HDMI IN: HDMI 19-pin × 1, Deep Color, HDCP compatible
480p (525p), 576p (625p), 720 (750)/60p, 720 (750)/50p, 1080 (1125)/60i, 1080 (1125)/50i, 1080 (1125)/24p, 1080 (1125)/60p, 1080 (1125)/50p
Terminals HDMI IN continued:: VGA (640 × 480)-WSXGA+ (1,680 × 1,050), compatible with noninterlaced signals only, dot clock: 25.2 MHz-146.25 MHz
Audio signal: linear PCM (sampling frequencies: 48 kHz, 44.1 kHz, 32 kHz)
Pixel configuration: Stripe
HDMI/DVI/D: fH: 27.0 kHz-68.7 kHz, fV: 24 .0 Hz-85.0 Hz,
dot clock: 25.2 MHz-148.5 MHz
WIRELESS MODULE: Connector for optional wireless module ET-WM200U/WM200E × 1
Lamp: 250 W UHM lamp
Resolution: 1,024 × 768 pixels (Input signals that exceed this resolution will be converted to 1,024 × 768 pixels.)
Contrast600:1 (full on/full off)
DVI-I (analog)/RGB: fH: 15 .6 kHz-91.1 kHz, fV: 24 .0 Hz-85.1 Hz,
dot clock: 162 MHz or lower
Video/S-Video: fH: 15.75 kHz, fV: 60 Hz [NTSC/NTSC4.43/PAL-M/PAL60]
fH: 15.63 kHz, fV: 50 Hz [PAL/PAL-N/SECAM]
Size: 4 cm (1-9/16 inches) (round) × 1
Output power: 5.0 W (monaural)
DVI-I IN: DVI-I 29-pin × 1
Digital: DVI 1.0 compliant, compatible with HDCP, compatible with single link only
480p (525p), 576p (625p), 720 (750)/60p, 720 (750)/50p, 1080 (1125)/60i, 1080 (1125)/50i, 1080 (1125)/24p, 1080 (1125)/60p, 1080 (1125)/50p
Digital continued:: VGA (640 × 480) -WSXGA+ (1,680 × 1,050), compatible with noninterlaced signals only, dot clock: 25.2 MHz-146.25 MHz
Y, PB (CB), PR (CR): Y: 1.0 Vp-p (including sync signal);
PB (CB), PR (CR): 0.7 Vp-p, 75 ohms
COMPUTER (RGB) IN: D-sub HD 15-pin (female) × 1
AUDIO IN 1: M3 × 1 (L, R × 1), input impedance: 22 kilohms or more
AUDIO IN 2: M3 × 1 (L, R × 1), 0.5 Vrms, input impedance: 22 kilohms or more
AUDIO IN 3: RCA × 2 (L, R × 1), 0.5 Vrms, input impedance: 22 kilohms or more
AUDIO OUT: M3 × 1 (L, R × 1) (monitor out: 0-2.0 Vrms, variable)
Cabinet materials: Molded plastic (PC + ABS)
Operation noise: 33 dB (lamp mode: NORMAL), 29 dB (lamp mode: ECO)
Remote Control Unit Power Supply: 3 V DC (R6/LR6/AA type battery × 2)
Remote Control Unit Operation Range: Approximately 15 m (49 ft 3 in) when operated from directly in front of the signal receptor
Remote Control Unit Dimensions (W × H × D): 48 × 163 × 24.5 mm (1-13/32" × 6-5/8" × 31/32")
Remote Control Unit Weight: Approx. 117 g (4.1 oz) (including batteries)
Wireless Manager ME 5.5 system requirements: To use network functions, a PC is required that meets the conditions given below.
OS: Microsoft®
Windows® XP: Professional 32-bit, Home Edition 32-bit, Tablet PC Edition 2005 32-bit
Windows Vista®: Ultimate 32-bit/64-bit, Business 32-bit/64-bit, Home Premium 32-bit/64-bit, Home Basic 32-bit/64-bit
OS continued:: Windows® 7: Ultimate 32-bit/64-bit, Professional 32-bit/64-bit, Home Premium 32-bit/64-bit
Apple Mac OS X: v10.4, v10.5, v10.6
Web browser: Windows®: Internet Explorer 6.0/7.0/8.0
Mac OS: Safari 2.0/3.0/4.0
CPU: Windows®: 1 GHz or higher Intel® Pentium® III or higher, or other compatible processor
Mac OS X: 1 GHz or higher PowerPC G4, or 1.8 GHz or higher Intel® Core TM processor
Memory: 256 MB or more (512 MB or higher is recommended for Mac OS X)
Free hard disk space: 60 MB or more
CD-ROM drive: CD-ROM drive or DVD drive (required for installation)
Wireless LAN: The optional ET-WM200 is required.
IEEE 802.11b/g/n compatible (built-in wireless LAN system or external IEEE 802.11b/g/n LAN card must be installed and running normally.)
Wireless LAN continued:: Wireless connection may not be possible with some IEEE 802.11b/g/n wireless LAN systems. Macintosh computers must have a built-in wireless LAN adapter.
Wireless LAN continued: For IEEE 802.11n connection, use a wireless LAN adapter, projector and access point that are IEEE 802.11n compatible, and connect with Infrastructure mode.
Wired LAN connector: RJ-45
Optional accessories: ET-LAF100A
Replacement lamp unit: ET-EMF100
Replacement filter unit: ET-PKF110H (for high ceilings)
Ceiling mount bracket: ET-PKF110S (for low ceilings)
Wireless module: ET-WM200U (for North America)
ET-WM200E (for Europe and Asia)
 
1 The operating temperature range is 0°C (32°F) to 40°C (104°F) when used in High-Altitude mode (1,400 m [4,593 feet] to 2,700 m [8,858 feet]). Also, if the ambient temperature exceeds 40°C (104°F) (35°C [95°F] in High-Altitude mode) when using all four lamps, the light output may be reduced approximately 30% to protect the projector.: 

Accessories

model description
ET-LAF100A Replacement lamp unit
How to Buy
certified0
ET-EMF100 Replacement filter unit
How to Buy
certified0
ET-PKF110H Ceiling mount bracket for high ceilings
How to Buy
certified0
ET-PKF110S Ceiling mount bracket for low ceilings
How to Buy
certified0
ET-WM200U Wireless Module
How to Buy
certified0
ET-TRM110 Transmitter for PT-AE7000U/PT-8000U 3D projectors
How to Buy
certified0