Panasonic values your privacy and your trust is important to us. We use cookies to enhance your website experience. By clicking “Accept all cookies”, you agree Panasonic can store cookies on your device and disclose information in accordance with our Privacy Policy. OK Learn More

Photo of AV-HS450
Specifications Video format HD 1080/59.94i, 1080/50i, 1080/23.98PsF*1, 1080/24PsF*1, 720/59.94p, 720/50p
SD 480/59.94i, 576/50i
Video processing Y:Cb:Cr, 4:2:2 10 bit (8 bit for FMEM)
RGB, 4:4:4 8 bit
M/E 1 M/E
Video Input Standard 16 SDI inputs (IN 1 to 16)
Optional Maximum of 4 inputs (IN A1, A2, B1, B2)
Reference input Black burst or tri sync signal input (with loop through) x 1*2
Video output Vertical frequency 60 Hz 1080/50p, 1080/59.94p
Reference output Gen-lock mode Loop through x 1
Internal sync black burst signal x 2
BKGD Wipe/DVE pattern Wipe x 12, Squeeze x 11, Slide x 8, 3D x 12, 2ch squeeze x 4, 2ch slide x 4, 2ch 3D x 4
Transition type Cut, Mix, Wipe (including DVE)
Image Image effect: PGM/A, PST/B BUS
Effect: Mosaic, Defocus, Mono color, Paint
KEYER Number of keys 1
Key type Linear key, Luminance key, Chroma key, Full key
Transition type Cut, Mix, Wipe (including DVE)
Wipe/DVE pattern Wipe x 12, Squeeze x 11, Slide x 9, 3D x 12
DSK Number of keys 2
Key type Linear key, Luminance key
Transition type Mix
PinP Number of PinP 2
Transition type Mix
AUX BUS AUX Bus 1-4 *4 *5
Input Function Frame Synchronizer IN 1 to 16 *6
Freeze IN 1 to 16 *6
Up-converter IN 13 to 16 *6
Color collector IN 9 to 16
Output Function Multi Viewer 2 systems
Labels, Tally indication, Split-screen (the screen may be split into 4, 9, 10 and 16 sections) *9
Other function OSD (PVW and several MULTI outputs), phase adjustment, chroma key sample marker, down converter (SDI output board only)
Frame memory 4 channels
Memory function Shot memory, BKGD/Wipe memory, PinP memory, Camera memory *10
Interface PANEL RJ45,100 Mbps x 1 (to connect to the control panel)
EDITOR D-sub 9 pin x 1, RS-422 (GVG protocol compatible)
COM D-sub 9 pin x 1, pan-tilt system control
TALLY/GPI D-sub 50 pin x 1 (8 IN and 31 OUT may be set)
LAN RJ45,100 Mbps / 10 Mbps x 1
Power supply/Power consumption AC 220 V to 240 V, 50 Hz/60 Hz 120 W
Operating temperature 0 °C to +40 °C
Operating humidity 10 % to 90 % (no condensation)
Dimensions (W x H x D) (2RU) 482 mm x 88 mm x 471 mm (excluding protrusions)
Weight Approx. 9.8 kg (without options/excluding accessories)
Approx. 10.3 kg (with full options/excluding accessories)
Note *1 1080/23.98PsF and 24PsF are not compatible with optional boards AV-HS04 M1, M2, M3, M4, M5, M6 and M7.
*2 Compatible with the same field frequencies of the system format. 1080/23.98PsF format is compatible with black burst (SMPTE318M-compliant) with 10F-ID, or tri-level sync signal.
*3 Analog output not supported.
*4 AUX BUS1 is compatible with MIX transition.
*5 May be routed through the SDI embedded audio input.
*6 Specifications for IN A1, A2, B1, and B2 depend on the specs of the mounted optional equipment.
*7 Specifications for IN 5 to IN 8 depend on the specs of the mounted optional equipment.
*8 Option [HD analog component]: IN 1 to 5 may also be used.
*9 Maximum 20 channels may be simultaneously displayed on 2 screens.
*10 May store and recall up to 10 presets (per camera) with current Panasonic pan-tilt systems.

Panasonic values your privacy and your trust is important to us. We use cookies to enhance your website experience. By clicking “Accept all cookies”, you agree Panasonic can store cookies on your device and disclose information in accordance with our Privacy Policy. OK Learn More