Specs - PT-DW90XE Large Venue

Panasonic values your privacy and your trust is important to us. We use cookies to enhance your website experience. By clicking “Accept all cookies”, you agree Panasonic can store cookies on your device and disclose information in accordance with our Privacy Policy. OK Learn More

AddedRemoved

See product page

Copy URL

PT-DW90XE

General	DLP™ chip	Panel size	21.6 mm (0.85") diagonal, 16:9 aspect ratio
		Display method	DLP™ chip x 3 (R, G, B), DLP™ projection system
		Pixels	1,049,088 (1,366 x 768) x 3, total of 3,147,264 pixels
	Lens		Optional powered zoom/focus lenses
	Lamp		355 W UHM lamp x 2 (dual lamp system)
	Screen size (diagonal)		1.78-15.24 m (70-600 inches)*² (16:9 aspect ratio)
	Brightness*sup1/sup		9,600 lumens (dual lamp, high mode)
	Contrast ratio*sup1/sup		10,000:1 (full on/full off, in Dynamic iris mode 3)
	Resolution		1,366 x 768 pixels (Input signals that exceed this resolution will be converted to 1,366 x 768 pixels.)
	Scanning frequency	HDMI/DVI-D/RGB	Horizontal: 15 - 100 kHz, vertical: 24 - 120 Hz, dot clock: 162 MHz or lower
		YPsubB/subPsubR/sub (YCsubB/subCsubR/sub)	525i (480i) : fH 15.75 kHz; fV 60 Hz 625i (576i) : fH 15.63 kHz; fV 50 Hz 525p (480p) : fH 31.50 kHz; fV 60 Hz 625p (576p) : fH 31.25 kHz; fV 50 Hz 750 (720)/60p : fH 45.00 kHz; fV 60 Hz 750 (720)/50p : fH 37.50 kHz; fV 50 Hz 1035/60i : fH 33.75 kHz; fV 60 Hz 1125 (1080)/60i : fH 33.75 kHz; fV 60 Hz 1125 (1080)/50i : fH 28.13 kHz; fV 50 Hz 1080/25p : fH 28.13 kHz; fV 25 Hz 1080/24p : fH 27.00 kHz; fV 24 Hz 1080/24sF : fH 27.00 kHz; fV 48 Hz 1080/30p : fH 33.75 kHz; fV 30 Hz 1080/60p : fH 67.50 kHz; fV 60 Hz 1080/50p : fH 56.25 kHz; fV 50 Hz
		S-Video/Video	Horizontal: 15.75/15.63 kHz, vertical: 50/60 Hz (NTSC, NTSC4.43, PAL, PAL60, PAL-N, PAL-M, SECAM)
	Optical axis shift*sup5,/sup/sup	Vertical	±70% (±60% with the ET-D75LE6) from center of screen, powered
	Optical axis shift*sup5,/sup/sup	Horizontal	±30% (±20% with the ET-D75LE6) from center of screen, powered
	Terminals	HDMI IN	HDMI 19-pin x 1 Deep Color, compatible with HDCP, 480p, 576p, 720/60p, 720/50p, 1080/60i, 1080/50i, 1080/24p, 1080/24sF, 1080/25p, 1080/30p, 1080/60p, 1080/50p (non-interlaced signals only), VGA (640 x 480)-WUXGA*3 (1,920 x 1,200), dot clock: 25 - 162 MHz
		DVI-D IN	DVI-D 24-pin x 1 DVI 1.0 compliant, compatible with HDCP, compatible with single link only, 480p, 576p, 720/60p, 720/50p, 1080/60i, 1080/50i, 1080/24p, 1080/24sF, 1080/25p, 1080/30p, 1080/60p, 1080/50p, VGA (640 x 480)-WUXGA*3 (1,920 x 1,200), compatible with non-interlaced signals only, dot clock: 25 -162 MHz
		RGB 1 IN	BNC x 5 (RGB/YPBPR/YCBCR x 1)
		RGB 2 IN	D-Sub HD 15-pin (female) x 1 (RGB/YPBPR/YCBCR x 1)
		VIDEO IN	BNC x 1 (composite video)
		S-VIDEO IN	Mini DIN 4-pin x 1 (S-Video)
		SERIAL IN	D-sub 9-pin (female) x 1 (for external control, RS-232C compliant)
		SERIAL OUT	D-sub 9-pin (male) x 1 (for link control, RS-232C compliant)
		REMOTE 1 IN	M3 jack x 1 (for wired remote control)
		REMOTE 1 OUT	M3 jack x 1 (for link control)
		REMOTE 2 IN	D-sub 9-pin (female) x 1 (for external control, contact control)
		LAN	RJ-45 x 1 (for network connection, 10Base-T/100Base-TX, compliant with PJLink™)
	Keystone correction range		Vertical: ±40° (±22° with the ET-D75LE50/D75LE54, ±28° with the ET-D75LE6)5, horizontal: ±15° (±10° with the ET-D75LE6)*5
	Installation		Ceiling/floor, front/rear
	Power cord length		3.0 m (9 ft 10 in)
	Power supply		220-240 V AC, 4.8 A, 50/60 Hz
	Power consumption		900 W (950 VA at 240 V) (0.3 W with standby mode set to ECO*6. 8 W with standby mode set to NORMAL. Both with fan stopped.)
	Dimensions (W × H × D)		530 x 200 x 548.5 mm (20-7/8 x 7-7/8 x 21-19/32 inches) (with legs at shortest position, optional lens not included)
	Weight		Approximately 24 kg (52.9 lb) without lens
	Operating temperature*sup7/sup		0°C-45°C (32°F-113°F)
	Operating humidity		10%-80% (no condensation)
	Supplied accessories		Power cord with security lock, wireless/wired remote control unit, batteries for remote control (AA type for North America, R6/LR6 type for Europe and Asia)x 2, safety wire rope
NOTE			1: Measurement, measuring conditions, and method of notation all comply with ISO 21118 international standards. 2: 1.78-7.62 m (70-300 inches) with the ET-D75LE50/D75LE54. 3: WUXGA resolution is supported only when the signals are compliant with VESA CV T-RB (Coordinated Video Timing-Reduced Blanking). 4: The optional lenses ET-D75LE4/D75LE5 were discontinued. 5: When using only the KEYSTONE correction. When using both the KEYSTONE and ARC corrections of the Geometric Adjustment function: vertical ±5°, horizontal ±5° (vertical ±10° and horizontal ±15° with the ET-D75LE40/D75LE44/D75LE8). 6:With the standby mode set to ECO. When the standby mode is set to ECO, network functions such as power on over the LAN network will not operate, and the serial output terminal cannot be used. Also, only cer tain commands can be received for external control using the serial terminal. 7:The operating temperature range is 0°C (32°F) to 40°C (104°F) when used in High-Altitude mode (1,400 m (4,593 ft) to 2,700 m (8,858 ft)). NOTES ON USE 1.Do not install the projector in locations that are subject to excessive water, humidity, steam, or oily smoke. Doing so may result in fire, malfunction, or electric shock. 2.The projector uses a high-voltage mercury lamp that contains high internal pressure. This lamp may break, emitting a large sound, or fail to illuminate, due to impact or extended use. 3.The projector uses of high-wattage lamp that becomes very hot during operation. Please observe the following precautions. • Never place objects on top of the projector while it is operation. • Make sure there is an unobstructed space of 500 mm (19-11/16 in) or more around the projector’s exhaust openings. • Do not stack projector units directly on top of one another for the purpose of multiple (stacked) projection. When stacking projector units, be sure to provide the amount of space indicated between them. These space requirements also apply to installation where only one projector unit is operating at one time and the other unit is used as a backup. • If the projector is placed in a box or enclosure, temperature of the air surrounding the projector must be between 0°C (32°F) and 35°C (95°F). Also make sure the projector’s intake and exhaust openings are not blocked. Take particular care to ensure that hot air from the exhaust openings is not sucked into the intake. 4.If the projector is to be operated continuously 24 hours a day, use the multi-lamp optical system&s alternating lamp operation (lamp changer) function. The projector can be operated continuously 24 hours a day in four-lamp operation mode, but it will automatically operate with three lamps for 8 hours of the 24 hours. 5.The lamp replacement cycle duration becomes shorter if the projector is operated repeatedly for short periods. • The length of time that it takes for the lamp to break or fail to illuminate varies greatly depending on individual lamp characteristics and usage conditions. • The brightness of the lamp will gradually decrease with use. 6.Because the ET-D75LE50/D75LE54 is a fixed short-throw lens, the lens shift function cannot be used with it. 7.Due to natural characteristics of lamps, screen brightness may vary (flicker). This is not an indication of faulty lamp performance.